I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

Similar Messages

  • Installation problems installing new Canon MG3170 onto MAC Book Pro with OS X 10.7.5.  Tried installing  using set up disk. Didn't work.  Uninstalled files and downloaded drivers from Canon Website. Didn't work. Uninstalled again and plugged printer usb

    Having problems installing Canon MG3170. Anyone have any solutions?  Here is what I have tried:-
    -Installed from provided Canon disk, firstly with wireless connection, then using USB connection.  Printer could not be added because the Macbook returns that the software is not available from Apple for both types of connections.
    -Uninstalled software from the Canon disk, checked for software updates, then downloaded drivers (printer and scanner) from Canon Website.  Again tried to install using wireless connection then USB connecton.  Printer could not be added because Macbook returns that the software is not available from Apple
    -Uninstalled drivers downloaded direct from Canon Website and plugged printer into Macbook using USB, Macbook recognised the printer and searched for the software, again Macbook returns that hte software is not available from Apple.
    Help!

    nrg adjusta,
    Sorry it took me a while to repsond, Ive been pretty busy with school and work. But for my hard drive problem, I did hours and hours of more research and trying countless ways of installing and tweaking things in my laptop and absolutely nothing worked that I could do. It was very irritating because I felt like I was so close to fixing it and I was just missing a step somewhere. Though It still boggles me why the disk utility shows a different capacity for the HD's. One thing I'm going to try next is replacing the hard drive cable that goes from the internal HD to the macbook. I read somewhere that sometimes those can go bad over time, and also if you get a new, modern hard drive, sometimes the old cable (for some odd reason) might not be compatible with the new HD. So i want to test it out for myself to see it that is the actual culprit.
    http://www.ifixit.com/MacBook-Parts/MacBook-Hard-Drive-Cable/IF186-018
    Once I get the cable and install it I'll let you know the results and if it helped at all.
    Have you made any progress on your hard drive at all? If worst comes worst for you, you can probably get a SATA to USB cable and try to reformat it that way (this is the way that worked for me, but the only problem was it wouldn't be recognized when I installed it internally. Thats why i want to try getting the new cable), and if it still wont recognize it after that, you can just leave it outside of your mac, and just boot from that. The only thing that ***** about that is you have this big hard drive handing off the side of your mac when ever you need to use it.
    Heres a link for a SATA to USB. this one is good because is compact and protects the HD from damage and most static electricity.
    http://www.thinkgeek.com/computing/usb-gadgets/e6d9/?srp=3
    Im still continuing my search for the answer and once i find it (if ever!) I'll post it.

  • HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

    Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
    iTunes has been running great on this PC for years. What's up?
    Ron

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Download and instalation instruction of itune for windows 7 operating system

    download and instalation instruction of itune for windows 7 operating system

    This is a user to user technical support forum, you are not addressing Apple here.
    Regardless, if you want/need help... provide the specific details and error messages that are occurring.
    We are not mindreaders.

  • Posting questions on "iTunes for windows" page

    Does anyone know why I can't find the link to "post a new topic" on the iTunes for windows page? I really need a question answered and i can't post it. HELP!
      Windows XP  

    nevermind

  • Where do I get an English version of iTunes for Windows?

    Where do I get an English version of iTunes for Windows?
    <Edited By Host>

    http://www.apple.com/support/downloads/quicktime716forwindows.html

  • Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you

    Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you for downloading iTunes'' but I don't find it in my system.
    I have tried all suggested option to solve it but all in vain. Please help me to get rid of this problem

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • HT2292 My iphone is described as iPhone 4s on the back, but the model number on the back is A1332. IThe device cannot be recognised on by itunes for windows. any suggestions?

    My iphone is described as iPhone 4s on the back, but the model number on the back is A1332. IThe device cannot be recognised on by itunes for windows. any suggestions?

    Any chance someone had it repaired somewhere (i.e. not by Apple) - maybe had the back glass replaced  by a 3rd party shop at sometime?
    Dose the phone have siri (iPhone 4 would not)? Does the camera have face recognition and panoramo (again, iPhone 4 would not)?
    If everything else checks out as iPhone 4s, then I'd guess the back glass was damaged and someone got it replaced.
    In order to get it recognized by iTunes, you may need to plug it in and force it into recovery mode, see
    http://support.apple.com/kb/HT1808 and then restore it as a new device.

  • I cannot uninstall itunes version 10.7.0.21 from my laptop use of that I also cannot install the new update.

    I cannot uninstall iTunes version 10.7.0.21 from my laptop (windows 7), therefore I cannot install the new iTunes version....!
    Every time I try to do it, a "message" from the windows installer pops up saying "The feature you are trying to use is on a network resource that is unavailable", I try to find the installation package "iTunes.msi" but I can never find it either...!
    The funny part is, I can still use this version, but I would like the have the update, which can make my computer much faster than now!
    Can someone help me out??

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

    what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

    How to prevent iTunes for Windows from "Updating iTunes Library"?
    My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
    Thanks for any help/suggestions.

    Connect the PC to the library on the NAS. Wait while "updated".
    Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
    Close iTunes on the PC. Do not open iTunes on the Mac.
    Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
    Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
    The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
    Open iTunes on the Mac. It will update again, but that should be last time.
    tt2

  • Just set up iTunes for windows but when I try to sync my iPhone to this it says I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same  library on the windows is blank

    Just set up iTunes for windows but when I try to sync my iPhone to it this is what it says, I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same password on this windows pc system same log on etc..I don't have anything loaded on it. All I want is for the info that's on the power book in iTunes and my iPhone to snyc/update etc on the windows pc.  How do I do this? My power book is dead to the world. 

    Read here.
    https://discussions.apple.com/message/18565125#18565125

  • How can I download a previously downloaded purchase to my iTunes library on my laptop when the listing for the song in my library won't play because it says it cannot locate the file. Yes I have searched my iTunes folders and also done a full windows sear

    How can I download a previously downloaded purchase to my iTunes library on my laptop when the listing for the song in my library won't play because it says it cannot locate the file. Yes I have searched my iTunes folders and also done a full windows search. The track plays on my iPad and my iPhones but will not play on my laptop!?
    It has an "!" To the left of the song title in my library
    My worry is that if I sync my iPad/iPhone then I will lose the track on those also!

    If you cannot find the file on your hard drive then once you delete the current broken entry you should be able to redownload from iTunes in the Cloud. This assumes the item in question qualifies. Note that audiobooks, digital booklets, iTunes LPs & Extras, ringtones, selected movies etc. don't.
    If prompted don't hide the item. You may find that you need to close and then reopen iTunes before it will appear for download.
    tt2

  • TS4062 My daughter's ipod touch 4th Gen cannot sync over wi-fi and cannot be seen in the devices section of itunes for windows.

    My daughter's ipod touch 4th Gen cannot sync over wi-fi and cannot be seen in the devices section of itunes for windows.  I have gone through all steps of the troubleshooting guide.  All of our other ios devices are wi-fi sync-ing fine.   Can anyone help?
    Not sure how long this has been a problem.  Kids are young and I manually manage most things but recently having music synced is an issue.  All software has been kept up to date.

    bayfsmithy wrote:
    I have read through the forgotten passcode section.  Itunes will not recognise the ipod until the passcode is entered (thats the message it keeps saying), when I press try again, it says unknown error. 
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...

  • I havent upgraded my iphone 4 to ios 4.3. Now when i try to back up in itunes, it doesnt recognise my iphone, but sees it as a camera, not giving me the links i need to back up. I have removed itunes completely and downloaded it new.

    i havent upgraded my iphone 4 to ios 4.3. Now when i try to back up in itunes, it doesnt recognise my iphone, but sees it as a camera, not giving me the links i need to back up. I have removed itunes completely and downloaded it new.

    What computer OS are you using. Here are links for iTunes not recognizing the iPhone in different OS.
    Apple:  http://support.apple.com/kb/TS1591
    Windows:  http://support.apple.com/kb/TS1538

Maybe you are looking for

  • Printing to a shared printer on Windows 7 from 10.6

    I have two MacBooks running Snow Leopard and I'd like to print to a shared printer on a Windows 7 desktop PC. I've tried putting all three computers on the same WORKGROUP but I still don't see the Win7 box. Help!

  • LSMW_Position,Pers area error.

    hi Seniors, I am tring to upload Infotype 0000 through PA40- LSMW. i am independently doing it but i am not an ABAPER. i have kept the number range internal and maintained the flat file with PERNR BEGDA ENDDA MASSN MASSG PLANS WERKS PERSG PERSK I hav

  • Urgent help please!! decrypting a string recived from external device

    i'm using 3des, with ECB mode and PKCS5 padding to encrypt and decrypt a string with a secret Key. i get an encypted string from external device (remote pc). this string is represented with an array of 16 bytes. i pass this array directly to the meth

  • Operate Asycuda (customs software) on windows 8.1 operating system

     Hi, How can i get ASYCUDA (customs) software to work on Windows 8.1 PC? Winston {removed}@gmail.com

  • Move users and schemas from one instance to another

    Hi, I'm starting out in a DBA position. My task at the moment is to move users and schemas from one instance to another. We're using 9.2.0.7. I have concluded that the following steps are necessary to move users and schemas from one instance to anoth