I've upgraded from iOS 6 to 7.0.3 and I know that i entered the corrct passcode but my iPad 4 wont accept it. How do I reset the passcode?
I can't get into my iPad since upgrading from iOS 6 to 7.0.3
I know that I've entered the correct passcode, and iOS 7 validates it as it installs, but now I'm locked out, but wasn't intially.
How do I gain acces again? I've tethered it to iTunes but can't see anything to help.
Help please.
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Since you have IOS-7, read this.
Similar Messages
-
I have an iPad 2 and is it worth upgrading from iOS 5.1 to 6.0 And should I wait for further stable updates? As I have there are app compatibility and security issues on ios 6.
Most users haven't had problems with iOS 6, however, some have. I'm still using iOS 5.1.1 on my iPad 2. There is a beta version iOS 6.1 being tested. Don't know when it will be released. When it is released, I'll update.
Cheers, Tom -
I am up to capacity in the storage on my iphone and I am sure it is because I have so much music on the phone but I have the music in icloud. How do I delete it from my phone and once I do that, how do I retrieve it from icloud.
Thanks
Charcharlottefrommarysville wrote:
I am up to capacity in the storage on my iphone ...
read here...
https://discussions.apple.com/message/21745701#21745701 -
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein -
I can't upgrade from IOS 6.0.1 to IOS 7.1.1 on my iPad 2. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation if I try and install it. It claims that I have lost internet connection, which I have not. I cannot restore or update the iPad in iTunes either, if I try to, I get an error message which says that I 'do not have permission to access the requested resource'. I am using the latest version of iTunes on Windows 8. I have tried putting the iPad in recovery mode and restoring it with iTunes, the result is the same.
Any help would be much appreciated.
Thanks!@Rudegar
Thanks for the reply, but I've been having this problem for well over a week. If it is a corrupt download, is there some way of deleting it from the iPad and getting a new one?
Thanks -
After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G.
After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G, i think apple has removed that toggle. Poor 3G range is here in india-Pune. Requesting Apple Dev. Team to do the needful asap.
ios 8 *****. i am unable to switch 2G to 3G while it eating my battery. *****
-
Hi, I upgraded from iOS 5.1.1, to iOS 6, and it's ridiculously slow, I can't sync to my computer, (manually manage music), and all of my photos were gone. How can I get my photos back? It says restoring photos, but it's said that for two days now!
It just does't sync. I connect it to itunes, but nothing happens. Where it says how much space I have, it's just on ebig bar that says other. I can play my music on itunes, but not when i unplug it.
All of my photos were gone, i took and saved them with my ipod.
The photo app is saying restoring.
What should i do? -
Can i upgrade from ios 6.1.2 to 7.1.2?
hi..
just want to know if upgrade from ios 6.1.2 to ios 7.1.2 on iphone 4s still possible now?As has always been the case, you can only update to the latest available software for your iPhone.
If you have a 4s then that is 8.1.2 -
After upgrading from ios 7 I was unable to activate my iphone 5
after recent upgrading from ios 7,Iwas unable unlock the sim card as well as not been able to activate my phone
What is the exact wording of the error message?
Has the iPhone been jailbroken or modified to work
with other than the original wireless provider? -
Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"
After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.
-
I upgraded from ios 4.3.3 to ios 7, but during the final setup I input the language (english) and try to connect with my wifi and I get the message unable to join my home network. How can I get past this so I can complete the setup?
Are you using the encryption key code for your home wifi network? The encryption key code is usually located on a sticker on the back of the router.
-
Upgradeing from ios 4.2.1 to ios 4.3.3 ipod
can i upgrade from ios 4.2.1 to ios 4.3.3 on a ipod if so how do i do it
Depends on the generation:
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1 on ipad 3 .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't found the correct camera app .please help me .please give any suitable link where i find the correct camera app
It's a built-in app, so it can't be deleted nor downloaded from the store. If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Camera being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I want to upgrade from iOS 6 to iOS 7. I do not want 8. Is this possible?
I want to upgrade from iOS 6 to iOS 7. I do not want 8. Is this possible?
swbookeesue wrote:
I want to upgrade from iOS 6 to iOS 7. I do not want 8. Is this possible?
What prevented you from updating to iOS 7 for the previous 12 months? -
Jannuary 2014 -I need Upgrade from ios 4.3.5 to version 0.6.x -NO ios 7!-
my iphone is MC605lP (iphone 4)
the system is now in use ios 4.3.5 (8L1)
I never upgraded to ios 7
I need to upgrade from ios 4.3.5 to version 6.x.x or better for my iphone 4
NO ios 7.x.x !!!!
Help can someone tell me how?
Regards
StefanoBut many people on the web say: os 7 does not work on the old phone! (it will be true?)
I'm afraid of losing the performace of the iPhone (and the data).
so ... I can not get the right version because I forgot to download it?
Are you sure?
Maybe you are looking for
-
How do i change the apple ID on my Imac
I have two apple ID accounts. I want all of my apple devices signed into the same apple ID. How can I change the apple ID that I am signed into on my iMac?
-
Reader X is blocked when open pdf file via click on file name
I have installed Reader X 10.0.0 (10.0.0.407) and Adobe Acrobat 9 Pro 9.4.1 (9.4.0195.) on a Desktop and a Notebook (Win XP SP3). In the case I click on a PDF file on both systems often (but not in any case, found no rule until yet ...) following hap
-
Is there a Creative Cloud app to use instead of Powerpoint?
Is there a Creative Cloud app to use instead of Powerpoint? I have a Student subscription and have to do a presentation in class next week. I do not have Microsoft's Powerpoint and am hoping to find something in the CC that would work for me.
-
EHSM: Use Auth Check BAdI to hide Incident
Hi all, I have enhanced the standard Auth Check BAdI BADI_EHHSS_INC_EXT_AUTH_CHECK for EHSM. Works like a charm. But I just got another requirement and thought maybe someone else has done this before. Right now, I have it set up so people with out t
-
I have an issue in Hiring Action. After choosing the hiring action, I have to fill up the data for employee group in the screen for Actions infotype. Now, I have several employee groups like permanent, probationer, trainee, resigned, retired, dismiss