I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.
I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.
Well if your iPod is not appearing under Devices in iTunes when you have it plugged into a high powered USB 2.0 port, then that would explain why this newly loaded CD has not synced to it yet.
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock
Similar Messages
-
I would like to delete a number of podcasts from my iPhone. They do not show up in iTunes and when I pull the arrow on the phone it does not give me a delete option. I am using a Windows 7 PC. Recently I had to restore my computer, when I first reconnected my iPhone I thought it might sync it and wipe out everything on my iPhone, but it didn't do that. The only thing that seems messed up is the podcasts. I do have an app called Bookmark that I use to listen to books and podcasts. Thanks for any ideas.
LaurenSOLUTION: Some Music Won't Play After Upgrading Your iPhone To iOS7
Red square in red circle cannot play songs
My iPod isn't playing certain songs. Help? -
hubby has an iPad with purchased games. I just got a mini and would like to have these same games without having to pay again. We just purchased a new game that downloaded to both. Can I get his existing games on my mini? iCloud activated and wifi was used when we got new game.
Yes, you can get those games on your iPad Mini.
Sign into the iTunes and App Store section of the Settings with the same Apple ID used to buy those games. Then go to the App Store and click "Updates" and then "Purchases" and you should see the games your hubby bought with his device.
Hope that helps! -
I just purchased a movie and I can't get the iTunes extras to play, the unrated version plays but I want to watch the special features . Am I just stupid or is there something simple I am not seeing?
Hello there, NighHawk420.
The following Knowledge Base article provides some practical information on where to locate the iTunes Extras when purchased with a movie from iTunes:
About iTunes LP and iTunes Extras
http://support.apple.com/kb/HT3823
When you purchase a movie with iTunes Extras, the primary movie along with the iTunes Extras will download to your iTunes Movie folder. Mouseover the cover art and click the icon on the album to open the main menu to play the movie or view other features.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working
Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps! -
I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
Cheers, Tom -
I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?
I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie -
My InDesign document has two page 1s and I can't get the page numbers to work. Help!
My InDesign document has two page 1s and I can't get the page numbers to work. Help! How do I fix this?
Do you mean the first section is starting at page one?
And the second one now is starting at page two?
So I would ask why you would need sections at all?
Did you set the controls for Automatic Page Numbering?
If you select the particular page where section two is starting in the Pages Panel, you could untick the Start Section option in the numbering and section dialog. That would remove the section. You cannot do that with the very first section, but you should set the first section to Automatic Page Numbering if you ever want to use your document with an inDesign book file.
Uwe -
I have an iphone 4 and I can't get the blue tooth to work in my 2009 Nissan 370z. Any suggestions?
I have an Iphone 4 and I can't get the bluetooth to work in my 2009 Nissan 370z. Any suggestions? Thank you
Was your airport express purchased recently?
Was it new or used?
Has it been set to extend an existing network?
You can always try resetting the airport express by unplugging it and pressing the little button on the underside with a stretched out paperclip for roughly 30-45 seconds then try plugging it in again.
Once you've reset the airport express, you'll want to walk through the setup process from a Mac or Windows computer using Apple's Airport Setup Utility.
For OS X
http://support.apple.com/downloads/AirPort_Utility_5_4_1
For Windows
http://support.apple.com/kb/DL840 -
Elements and premiere elements 9 came with my computer and I can't get the updates.
I can't get updates for my Elements and premiere elements 9 which came installed on my computer. I can't find a serial number either. Sincerely, Terry
It is opening the Application manager and I try to download the updates, but it tells me to turn off the sync and it won't let me even open the backup-sync option.TerryDate: Tue, 26 Feb 2013 23:06:51 -0800
From: [email protected]
To: [email protected]
Subject: Elements and premiere elements 9 came with my computer and I can't get the updates.
Re: Elements and premiere elements 9 came with my computer and I can't get the updates.
created by Andromeda14 in Photoshop Elements - View the full discussion
What happens when you click on 'Help->Updates' option? Isn't it opening the 'Adobe Application manager' which shows all the updates. ~Andromeda
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5106168#5106168
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5106168#5106168
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5106168#5106168. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!
It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.
-
great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.
Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex> -
I don't know what I did, but Aperture no longer sees my HD as online, and I can't get my photo versions since the HD is not online. I see it in Finder and can see the original files and even copy them from Finder, but Aperture no longer recognizes the HD, and when I try to work with the picture, it doesn't let me because it says that the master is in a volume that's offline. Does someone know how to fix this?
Just to clarify:
Does Aperture not see the drive at all (that is, does Aperture also not see the drive in the import and export dialogue) or are only the Master Files disconnected?
If Aperture does not recognize the drive at all, check the permission settings of the drive in the "Get Info" panel and make sure you have read/write access, also the "Ignore ownership on this volumn" checkmark, this should be set.
If correcting the permissions does not help, make sure you have a backup, and then use "Disk Utility" to run a check and to repair the volumn, if necessary.
If Aperture can see the drive on import and export, but only does not see the master image files, then try to reconnect your masters.
Create a smart album or use a Search with the rule: "File status: offline", to select all images that need reconnecting to their masters.
Right click on the first image of the selection.
From the Pop-up window select "Locate referenced Files..."
Now the "Reconnect All" button should appear.
Click it. -
The chracters appeared in the emails for me on iPad 4 (not on PC) are too big. how can I get the chracters smaller?
Do you have Large Text turned on? See Settings > General > Accessibility > Large Text.
-
I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?
Welcome to the Apple Community.
Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions)
Maybe you are looking for
-
Hello All, I have the following scenario. I have two source system ECDCLNT200 and ECDCLNT230 and one BI system BIDCLNT200. client 200 is used for configuration and client 230 is used for data loading and validation.now firstly i created source syst
-
GPU not allowing TV connection
I have an MSi nvidia n570gtx twin frozr ii and I am trying to connect my tv to it. I tried the VGA cable with a dvi adapter that came with my monitor, and that worked but did not go to full screen. So I bought a dvi to hdmi adapter to try to get full
-
Hello All, I want to confirm that my client has made the down paymewnt with respect to Asset PO at the time of down payment whether the payment amount will be loaded to asset or not. As i know the payment amount should got to venders spl. gl a/c and
-
Backing up duplicated database in mount mode
Hi all In our environment we have a live database and a standby database, which is a duplicate of live. We keep this standby database in permanent recovery mode (ie mounted), where archive logs from live are recovered against the standby to keep it u
-
L2tpv3 dialing from cisco router
I have requirement where customer wants ip dialing to LNS from cisco router with the help of l2tpv3. Could anyone tell me how to configure this. regards shivlu jain