I want to create new id for my i phone 4s
i have used 2 account earlier but now i want create new id as i already purchased i moved my existing id to new
Your post is unclear...
nithyaasb wrote:
i have used 2 account earlier but now i want create new id as i already purchased i moved my existing id to new
Apple ID FAQs > http://support.apple.com/kb/HT5622
Similar Messages
-
Want to create new certificate for the SYSTEM PSE
when i got o tcode 'STRUSTSSO2" In my system i am seeing a wrong certificate for the system PSE.
i want to delete and and create a new certificate.
Can some one tell me detail steps how i can remove the existing certificate and create a new one.
I am going to use the new certificate for SSO from portal to this server.
Thanks
AndyHi Andy,
To remove the System PSE, follow the procedure described in [SAP Help|http://help.sap.com/saphelp_nw70/helpdata/EN/b6/23273aafa35d46e10000000a11402f/frameset.htm].
To create a new one, see the procedure [here|http://help.sap.com/saphelp_nw70/helpdata/EN/07/03473cbff75b01e10000000a114084/frameset.htm].
Regards,
Henk. -
Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.
Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
How to create new scope for SharePoint calendar?
How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K -
Problem in creating new implementation for filter dependent badi
Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM -
Create new tag for selected text using API?
Hello,
I want to add new tag for the selected text just like 'Create Tag from selection' .
is it possible to create tag for selected text using acrobat api?
please,help me.As per sample of snippetRunner for adding tag for selected text.
I tried below code
PDPage pg;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pd = AVDocGetPDDoc(avDoc);
pg = PDDocAcquirePage(pd, 0);
ASAtom theSelectionType = AVDocGetSelectionType(avDoc);
if (theSelectionType == ASAtomFromString("Text")){
PDTextSelect ts = static_cast<PDTextSelect>(AVDocGetSelection(avDoc));
PDSTreeRoot pdsTreeRoot;
CosObj pageObj = PDPageGetCosObj (pg);
PDSElement newElem;
PDSElementCreate(pd, &newElem);
char buf1[64];
strcpy (buf1, "A new structure element");
// set its type as "Document" standard type
PDSElementSetType(newElem, ASAtomFromString ("Document"));
// set its title
PDSElementSetTitle(newElem, reinterpret_cast<const ASUns8*> (buf1), strlen(buf1));
PDSTreeRootInsertKid (pdsTreeRoot, aElem, kPDSAfterLast);
PDSElementInsertMCAsKid // here something i have to add
If i have PDTextSelect how i can add tag for selected text.like user add tag using "CreateTagForSelectedText" option.
please,help me.
thanks. -
How to create new supply for demand if already supply exists.
We have 2 orders for 1 item. One for Domestic and other for Export. Item already have existing qty in onhand, and we dont want ASCP to see that and want to create new planned order(Supply)...This is for perticular item.
Please help ASAP.what if you created safety stock for the item?
what if you create a non net sub inventory that isn't included in the plan and transfer the on hand you dont want ASCP to see into this S.I?
hope this helps -
Error message at the time create new Hierarchy for Cost Centers (OKEON)
Dear Experts,
we have create new company code with reference to old company code. at the time create new Hierarchy for Cost Center with t code OKEON system given the error message "Overlapping intervals or identical values have occurred".
we have already checked the duplicate entry but not found the same.
Please help.
Regards
BK GAIKWADthe long text to the message is:
Diagnosis
You want to use cost center together with activity type . For this combination, however, no master data record was created in fiscal year . The record is defined in CCA during activity type planning.
System Response
Procedure
1.Create the master data record.
Activity type planning
1.Or, check your entries.
I think you should discuss it with your functional consultant -
Create new mailbox for existing users?
Hi All,
I am new to JNDI concepts. I need to create new mailbox for existing users in domino directory. is it possible?
Scenario is : I have some users in domino directory. They dont have mail account now. I want to create it.
Kindly guide me...
Thanks,
RamHi,
You can try LSMW (Direct method) for uploading class values.
Upload file can hae following structure:
OBJEK | ATINN | KLART | ATWRT
Release Grou+Release strategy | Characteristic name | Class type | Class Value
e.g. rel grp is PO, rel strategy is 01, characteristic name is EBAN_EKORG, and class value is 1000 then
OBJEK | ATINN | KLART | ATWRT
PO01 | EBAN_EKORG | 032 | 1000
multiple characterstics can be
OBJEK | ATINN | KLART | ATWRT
PO01 | EBAN_EKORG | 032 | 1000
PO01 | EBAN_EKGRP | 032 | 100
Regards,
Yogesh -
Need Help to create new screen for RF Sapconsole
Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alainhi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren -
I want to create home page for my application with short URL
I want to create home page for my application with short URL
as when I want user to use my application user must go to URL like this
http://127.0.0.1:7101/My-Project/faces/app/empModule/allEmployees/viewMyEmployees.jspxI want the user to use short URL , How can I use shorter URL not all this one.
I want shorter URL for my application not to write full path .
thanks in advance.
Edited by: user611775 on Oct 31, 2010 10:21 PMWell,
it's up to you. The first part (Mcit-Project-ViewController-context-root) is the context root which you define in the view controller project. 'faces' is the name the servlet filter reacts on. You can't omit it but shorten it in web.xml. The rest is your directory structure. I'm not sure how to shorten this other as to move the jspx files back into the web root folder.
By the way an ADF faces app never uses the .jspx at the end of the url. If you specify '.jspx', you only render the page but don't start the work flow.
Timo -
Create new session for each window opening
From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details.
but when i click on the link i called a servlet, get relevent details and redirect to student.jsp. The problem is ,all opened windows have same session id and there are session conflicts.
How can i create new sessions for each page thru the servlet or is there any other alternativesI actually was working on a problem that was similar to this, and the problem is with how each web-browser works with sessions...
Each browser window (Except in one case with IE) will use the same session in each window.
However, you might be able to use URL-Rewritting to manage your sessions and get around using cookies for for session tracking. I personally haven't tried this, but I'm betting that it will work.
Best of Luck,
Nate -
Problem in creating new versions for existing DIR using CV01N
I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.BThere is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110. "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
+**EXPORTING**+
+**is_draw = ls_draw**+
+**TABLES**+
+**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B -
Want to create program (XYZ) for scheduling anther program(ABC)
Requirement :
I have one report ABC and I want to create program XYZ for scheduling the report ABC (without executing the program ABC ).
Output : Program XYZ
1) schedule the report ABC
2) Provide the output of ABCSeee if the below code help:
REPORT Z_MQSCHD NO STANDARD PAGE HEADING LINE-SIZE 170 LINE-COUNT 58 .
DATA: ZCOUNT LIKE SY-TABIX,
JOBNAME LIKE TBTCJOB-JOBNAME,
PARAMS LIKE PRI_PARAMS,
JOBCOUNT LIKE TBTCJOB-JOBCOUNT,
AUTHCKNAM LIKE TBTCJOB-AUTHCKNAM,
SDLSTRTTM LIKE TBTCJOB-SDLSTRTTM,
SDLSTRTDT LIKE TBTCJOB-SDLSTRTDT,
VARIANT LIKE RALDB-VARIANT,
REPORT LIKE SY-REPID,
ZTIME LIKE SY-UZEIT,
PREDJOB_CHECKSTAT LIKE TBTCSTRT-CHECKSTAT,
PRED_JOBCOUNT LIKE TBTCJOB-JOBCOUNT,
PRED_JOBNAME LIKE TBTCJOB-JOBNAME,
RELEASED LIKE BTCH0000-CHAR1.
*email variables
DATA: emailaddr(80) TYPE c.
data: objtxt like solisti1 occurs 10 with header line.
data: tab_lines like sy-tabix.
DATA: OBJECT_HD_CHANGE LIKE SOOD1.
DATA: OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: OBJCONT LIKE SOLI OCCURS 0 WITH HEADER LINE.
DATA: RECEIVERS LIKE SOOS1 OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
NAME LIKE RS38M-PROGRAMM OBLIGATORY,
VAR LIKE RS38M-SELSET OBLIGATORY,
JOB LIKE TBTCJOB-JOBNAME,
FRQ1 LIKE SY-INDEX,
FRQ2(2) TYPE C.
SELECTION-SCREEN END OF BLOCK A1.
SELECTION-SCREEN: BEGIN OF BLOCK A2 WITH FRAME TITLE TEXT-002.
PARAMETERS: ZDATE LIKE SY-DATUM DEFAULT SY-DATUM OBLIGATORY.
SELECT-OPTIONS:
TIME1 FOR SY-UZEIT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK A2.
SELECTION-SCREEN: BEGIN OF BLOCK A3 WITH FRAME TITLE TEXT-003.
PARAMETERS: p_mail AS CHECKBOX DEFAULT 'X'. "X = Mail report
SELECT-OPTIONS: so_mlist FOR emailaddr.
SELECTION-SCREEN END OF BLOCK A3.
AT SELECTION-SCREEN ON FRQ2.
IF FRQ2 NE 'H' AND FRQ2 NE 'M' AND FRQ2 NE 'S'.
MESSAGE E001(Z1) WITH 'Time Unit must be H or M or S'.
ENDIF.
AT SELECTION-SCREEN ON ZDATE.
IF ZDATE < SY-DATUM.
MESSAGE E001(Z1) WITH 'Date must be greater than current date'.
ENDIF.
AT SELECTION-SCREEN ON TIME1.
IF ZDATE = SY-DATUM AND TIME1-LOW < SY-UZEIT.
MESSAGE E001(Z1) WITH 'Time must be greater than current time'.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF JOB IS INITIAL.
JOB = NAME.
ENDIF.
$$* Start of selection
START-OF-SELECTION.
IF JOB IS INITIAL.
JOB = NAME.
ENDIF.
clear params.
call function 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
no_dialog = 'X'
IMPORTING
out_parameters = params.
params-paart = 'X_PAPER'.
ZTIME = TIME1-LOW.
JOBNAME = JOB.
VARIANT = VAR.
REPORT = NAME.
AUTHCKNAM = SY-UNAME.
PARAMS-PRIMM = SPACE.
SDLSTRTDT = ZDATE.
CLEAR: ZCOUNT.
WHILE ZTIME LE TIME1-HIGH.
SDLSTRTTM = ZTIME.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = JOB
IMPORTING
JOBCOUNT = JOBCOUNT
EXCEPTIONS
OTHERS = 4.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
AUTHCKNAM = AUTHCKNAM
JOBCOUNT = JOBCOUNT
JOBNAME = JOB
PRIPARAMS = PARAMS
REPORT = REPORT
VARIANT = VARIANT.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
SDLSTRTDT = SDLSTRTDT
SDLSTRTTM = SDLSTRTTM
JOBCOUNT = JOBCOUNT
JOBNAME = JOB
IMPORTING
JOB_WAS_RELEASED = RELEASED.
IF RELEASED = 'X'.
WRITE: / 'Job', JOBNAME, '(' ,JOBCOUNT, ')' ,'will run at', ZTIME,
'on', ZDATE, 'with program',NAME, 'and variant', VAR.
IF NOT P_MAIL IS INITIAL.
CLEAR OBJCONT.
CONCATENATE
'Job' JOBNAME '(' JOBCOUNT ')' 'will run at' ZTIME 'on' ZDATE
'with program' NAME 'and variant' VAR
INTO OBJCONT SEPARATED BY SPACE.
APPEND OBJCONT.
ENDIF.
ELSE.
WRITE: /
'Unable to release job', JOBNAME, '(' ,JOBCOUNT, ')' ,'at', ZTIME,
'on', ZDATE, 'with program',NAME, 'and variant', VAR.
IF NOT P_MAIL IS INITIAL.
CLEAR OBJCONT.
CONCATENATE
'Unable to release job' JOBNAME '(' JOBCOUNT ')' 'at' ZTIME
'on' ZDATE 'with program' NAME 'and variant' VAR
INTO OBJCONT SEPARATED BY SPACE.
APPEND OBJCONT.
ENDIF.
ENDIF.
CASE FRQ2.
WHEN 'H'.
ZTIME = ZTIME + ( 60 * 60 * FRQ1 ).
WHEN 'M'.
ZTIME = ZTIME + ( 60 * FRQ1 ).
WHEN 'S'.
ZTIME = ZTIME + FRQ1.
WHEN OTHERS.
ENDCASE.
ENDWHILE.
IF NOT P_MAIL IS INITIAL.
CHECK NOT SO_MLIST IS INITIAL.
PERFORM SENDEMAIL.
ENDIF.
*& Form SENDEMAIL
text
--> p1 text
<-- p2 text
FORM SENDEMAIL.
clear objcont.
append objcont.
append objcont.
concatenate
'This e-mail was sent from an automated system...' sy-sysid sy-mandt
into objcont.
append objcont.
clear objcont.
objcont = 'Do not reply to this message.'(013).
append objcont.
MOVE: SY-LANGU TO OBJECT_HD_CHANGE-OBJLA,
'NOTIFICATION' TO OBJECT_HD_CHANGE-OBJNAM,
'Report from job scheduler' TO OBJECT_HD_CHANGE-OBJDES.
MOVE 'RAW' TO OBJECT_TYPE.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
*Now we will create the packing list entry for our text body.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
OBJECT_HD_CHANGE-OBJLEN = tab_lines * 255.
*in this next section we create our recipient list.
LOOP AT so_mlist.
clear RECEIVERS.
move so_mlist-low to RECEIVERS-RECEXTNAM.
MOVE 'U' TO RECEIVERS-RECESC.
APPEND RECEIVERS.
if not so_mlist-high is initial.
move so_mlist-high TO RECEIVERS-RECEXTNAM.
MOVE 'U' TO RECEIVERS-RECESC.
APPEND RECEIVERS.
endif.
ENDLOOP.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = OBJECT_TYPE
TABLES
OBJCONT = OBJCONT
RECEIVERS = RECEIVERS
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
ORIGINATOR_NOT_EXIST = 20
X_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SENDEMAIL -
Unable to create new domain for ORM in Weblogic 8.1
Hi,
I have installed Oracle Role Manager(ORM) 10.1.4 and to run ORM in weblogic i have to create a new domain for ORM.
I tried to create a new domain in weblogic 8.1 in configuration wizard by selecting the orm_createdomain_template_103.jar but i m getting an error
"There is a problem with the template".
This template is to create new domain for ORM in weblogic 10.3
Kindly help me to resolve this issue.
Regards,
ManjuI have installed ORM 10.1.4.1 on weblogic 10.3
I have also created a new domain for ORM in weblogic.
When i start the Managed server using startManagedWebLogic.cmd i m getting the following
errort
t3://localhost:7004/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainr
untime'. Resolved 'weblogic.management.mbeanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(C
lientProviderBase.java:156)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(
ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnec
torFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFacto
ry.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainR
untimeService.getDomainMBeanServerConnection(RegisterWithDomainRuntimeService.ja
va:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbean
servers.domainruntime'. Resolved 'weblogic.management.mbeanservers'; remaining n
ame 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
NamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
a:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
ava:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:20
6)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:21
4)
Truncated. see log file for complete stacktrace
>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to RUNNING>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Serv
er started in RUNNING mode>
Please help me to resolve this issue.
Regards,
Manju
Maybe you are looking for
-
Copy text to auto generated line items
Does anyone know how we could populate the text field automatically when the tax lines are generated during posting. We have set the editing option "copy text for GL account entry" but it never populates the autogenerated lines. Header Text would be
-
Adobe reader comes packed with two other programs
I've downloaded Adobe Reader and its working just fine. The problem is, it seems to have downloaded two other programs with it: Adobe Acrobat and Adobe Air. Do I want these programs? What are they? Also, when I try to open Adobe Acrobat I continually
-
HI Gurus, in Third party sales while iam working on MIGO, once i enter the PO number iam getting the error like " check table 169p for plant 'XXX' ". what could be the reason for getting this error and how can solve the problem, please suggest cheers
-
Trying to upgrade free Mac OSX Lion
I have a new MacBook Pro and I am trying to upgrade the free Mac OSX Lion. I have followed the link on the box, filled in the various steps etc. I keep on receiving an email requesting me to validate my email address and when I follow the link it eit
-
Where have the 3D options moved to in Photoshop CC?
Hello everyone I have upgraded from Photoshop Extended CS6 to Photoshop CC and cannot find the 3D menu or its options such as New Mesh From Layer or Cube Map. I have done quite a lot of Google searches but no related information has been found so far