I want to fix slowness but the instructions to not make sense to me. It says click on menu---I ask, "What Menu?" Can someone do this for me--online?"
I want to know how to speed up my Mozilla Firefox. It is very slow, but the instructions do not make sense to me. I do not know where the "menu" is to click on to reset to default. I have tried several things and none work. Thank you for your help.
Vicki
If you are talking about '''[https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Resetting Firefox]''' {web link}
This is a '''LAST RESORT ! !'''
Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
Similar Messages
-
I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?
What does the product developer say about system requirements? If it needs to be run from within Internet Explorer then you'll need to find a way to run Internet Explorer. Boot Camp or VM installation of Windows would be two options.
But first check the product requirements. -
I want to buy music but i can't remember my security questions, It says to reset it but the link is not there to reset. It says to contact ap support but I've tried both ways to contact and it says it isn't working.
The reset link will only show if you have a rescue email address on your account (an alternate email address is different). If you don't have one (you won't be able to add one until you can answer your questions) then you will have to contact Support in your country to get the questions reset.
How are you trying to contact Support ? You should be able to do so via the following :
Contacting Apple about account security : Contact Apple for help with Apple ID account security
Or if your country isn't on that page then use this form : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then add a rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID -
I bought an Ipod touch Used, I connected to my PC and I wanted to restore it, but the restoration could not be completed, since my PC does not recognize my iPod or iTunes. On the iPod screen displays an image thatsays I need to connect the device to iTunes.
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???
The work path is a vector object, and infinitely scalable, but when you stroke it, Photoshop lays pixels on a layer that follow the path. These pixels are raster based and can not be scaled without loosing quality. You do have options. If you want to make the raster layer bigger, transform the work path and stroke it again. Or work at a higher resolution in the first place.
Incidentally, you can't stroke a Path with the Pen, because it is a Vector based tool, and stroking is a raster based function. -
i'm not able to transfer files/download apps through itune. it keep asking me to authorization. i do this for many times....but why this asking me again and again.
To avoid that I would recommend deleting the folder first the copying won't be an issue or deleting all the files in the directory. I know this is an extra step but just like the warning on plastic bags someone somewhere did something they shouldn't have
Sorry, I have been there.
So generally it will ask you if you want to do this for X number of files
IT SHOULD ASK ONCE AND ONLY ONCE
I SAY YES AND GO AWAY AND I HAVE TO COME BACK AND HIT YES AGAIN
To avoid that I would recommend deleting the folder first the copying won't be an issue or deleting all the files in the directory. I know this is an extra step but just like the warning on plastic bags someone somewhere did something they shouldn't have
ND LOSE AL THE RIGHTS...
THIS IS BAD ADVICE! -
So, pretty much, I hadnt updated my ipod for quite sometime...and it wouldnt let me take music from my ipod onto my computer (now running the latest itunes) When I finally decided to update everything, the information about icloud said that it could download previously purchased music etc. So, I figured it would all be fine, as I assumed all my music, as Ive always used the same account, would overall be saved onto that in someway or another, and it could at least make it realise that Ive already downloaded things? so, I updated, my ipod was wiped except for photos, and now I cant get any of my previously purchased music, videos, or apps....however...I really care about the music most of all. I've read help sections millions of times...but I cant find any that acctually help me (none of the apple ones I have found have even mentioned the fact that theres NOTHING in the purchased bar) I tried downloading something else and that works fine on this new 'icloud' thing. Pretty much, I am acctually terrible with technology...and I probably should never assume things ever again...but if you have any idea what I could do to help me...that would be much appreciated!
get the order number from itunes account "Purchase History" & then send a mail to itunes store from following website. www.apple.com/support/itunes/ They will provide you exception to redownload because its Apple's problem
-
i have moved from an iphone 4 to iphone 5 and have done a back up of my iphone 4 and restored this back up to the iphone 5, but the apps do not appear to have come across. Have I done something wrong? Please can someone tell me how to move my apps across?
After you Restore from backup, sync the iPhone.
-
I am trying to install the latest upgrade for Adobe Photoshop Lightroom 5.pkg but the program will not accept my password, which works when I log into Adobe. What am I doing wrong?
G¹Day Ned, Thank you very much. That worked. I like simple solutions. Thank
you, again, for taking the time to respond. Steve -
if i purchase an app today can i download it on my ipad next week when i buy the ipad.....also i noticed on another purchase attempt the site would not allow me to type in my 3 digit security code? what next??
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
My iPad got wet from daughter using it in the bath. Not sure of extent of damage. We're in remote bali - what should I do?
Solutions for wet iPad.
http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
Cheers, Tom  -
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
my ipod touch is disabled for 22 million minutes and I want to fix it but I dont want to lose my pictures and everything else. Help please I dont remember the last time I updated it. Idk I think its been a year in an half since I known about it being disabled. What do I do? Im scared to restore it because I dont want to lose my stuff.
You have to restore and thus erase your iPod. that is how it works.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Photos
- If they are in an iPod backup then restore from that backup. See the restore topic of:
iOS: How to back up
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
I have followed the directions given on the Apple support pages and the ones provided in this community, but they do not match with what I get from the Airport Utility. According to the dorections, after starting a soft restart on the Airport Extreme, I should select the network from the menu bar item (which I suppose is the symbol for wi fi). Then it says to open the Airport Utility and select the Airport Base Station, ok up to now. But the instructions say that after selecting the base station to "click Continue". In my Airport Utility, which is the latest version, there is no Contimue. When I select the Base Station I get a bubble with information on the base and an "Edit" button. By clicking on this button, I am able to get a new window with info on the Base, inlcuding password, but I never get the window which says that the device has been reset. I need help, as I have bought a second Apple computer and need the password to set the wifi preferences, and I forgot the password for the Airport Extreme.
You're doing everything right. The problem is that the Apple Knowledge Base article is outdated and the screenshots do not correspond to the new version of AirPort Utility.
If all you need to do is find the password for the Extreme, you can do that by following this procedure. Use the Mac that is already configured to connect to your Extreme's network.
You can retrieve your existing wireless network password from a Mac you normally use on that network. Your wireless network password is stored in your Mac's Keychain.
You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
On that Mac, open the Utilities folder. Find Keychain Access and launch it.
In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
Double-click that, and in the window that appears check the box for "Show password".
You will get the following window:
In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
Then, click Allow, and your wireless network password will appear in the "Show password" field:
Make note of it.
Close the window, then quit Keychain Access. -
I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quickly .
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Maybe you are looking for
-
New problem here. 1. recently updated all drivers and such through lenovo updates and drivers after replacing laptop screen. now headphone jack no longer works. could be just coincidence. Sound continues to port through speakers, and I can't find any
-
How to replace a DVD drive on G4
I have a G4 running OSX 10.4.9 purchased in 2003 with a Pioneer DVD-RW DVR-105. It has not mounted for some time now, any discs either CD or DVD are not seen by the system. The hardware profile knows it is there (hence how I know what type it is) but
-
Can I leave an iMac running without rebooting for an extended period?
A month ago I bought a new iMac to replace an old one, which I used for Logic Pro and as a home media server -- it ran great for years (mostly Plex with a few scripts running through the day and night). I had a few issues with the new iMac hanging an
-
Trigger action when file opens via bridge
Can something be done to trigger a photoshop action when a photoshop files are opened using the Load Files as Photoshop Layer command or using DR.Browns Services Place-A-Matic 8bit? The Scripts Events Manager is unable to run an action or script when
-
hello every one,we are using oracle 11gr2 on windows 7 server.we have configured apache server to access it. when we open resource monitor oracle.exe is access by unauthorised access.how to block that. it show like process address oracle.e