I want to get good wifi in my house . I currently have a time warner modem/router separate from my phone modem but my upstairs does not get good reception. What would be the best way to get the best wifi if I started from scratch
I have a combination modem/router from time warner that is separate from my phone line but I get bad reception on my apple tv an ipads upstairs in my house. I would like to fix this and want to know the best way to go about it . Whether getting two modems and routers or just one base station. Please help
It is possible to extend a WiFI network using Apple's Airport Express, Airport Extreme Base Station, or even a Time Capsule. However the router that is creating the network (the one you have downstairs) must be configurable to permit another WiFi device to extend the network. All Apple WiFi routers can be configured that way, but there are many third party WiFi routers that cannot. The two routers can be connected wirlessly or by ethernet. From your description I suspect ethernet would be prefereable if yoiu had a good way of routing the cable.
Similar Messages
-
My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.
-
Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!
Was it just this one time? Could be that you, or your mom, were experiencing network problems. Try again at a later time.
-
My Mac is blocked and does not accept my pasword, what can i do, to unblock it?
Thanks for your replies.
I originally posted because I thought either I was doing something stupid, or that there was some little known setting or control that might sort things out.
When I called support, they tried 'little known setting or control' route, but it turned out that the ipad was definitely faulty and they have offered a replacement.
If I can help others having the same issue, I would say call support first before returning as it is possible to reset it if it is a software problem, rather than a fault with the hardware. -
Can anyone help?
Here you go > Resetting the PRAM
If a PRAM reset doesn't help, try accessing OS X Recovery.
Shut down the Mac and wait about ten second\s.
Then startup your Mac while holding down the Command + R keys. Let go of those keys when you see the spinning progresss indicator.
With any luck, you'll be able to access the built in utilities to verify and if necessary, repair the startup disk.
OS X: About OS X Recovery
message edited by: cs -
I cannot open the annotations
It's possible the file has been flattened, which leaves the sticky note indicator, but removes its actual contents...
-
My iPad Wi-Fi cellular 16 GB 4G switched off suddenly, even when the battery was 40% available. It is not switching on again, i have tried restarting by using sleep/wake button, but red slider does not appear. I kept it off like it was overnight, in the morning agin recharged it, but still it is not switching on. it is not responding, except when i connect the charger, it gives a blink noise that recharge has started. I removed the SIM and tried restart it but no response, What should i do to restart it please?
Seems to be working again, I haven't done anything though. And the "wifi" led on my laptop is off, which should mean that the interface is down.
This is driving me crazy I don't understand how the all thing works, if anyone has any tips that would be very nice.
Thanks! -
Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.
Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526 -
The best way to get 5.1 sound out of Mac Pro
Hello. I'm not sure if this is the right place to ask this, but could someone recommend me the best way to get 5.1 sound of a Mac Pro. Since I don't require hi-fi -level sound, just simple directional audio for gaming and such, I wouldn't like to pour a lot of money to this. As I see it, I'd need an external sound card, internal PCI-E soundcard or speakers that have an optical input. I would like for the cost to be in two digits, euro or dollar.
Any suggestions about hardware?Once again, the issue of 5.1 w/Apple comes up.
Here is the bottom line.
You will only get 5.1 audio if the following conditions are true:
- You are using the OPTICAL output on your Mac
- You are playing a DVD with a 5.1 soundtrack
That's it. The simple truth is, that even if you have a Z-5500 setup (like I do), you still will not get 5.1 surround in ///any/// applications other then while playing a DVD.
There is no way to get 5.1 out of a game on a Mac Pro. No matter how much money you throw at it. The support simply is not there. It is not a software issue, it is not a driver issue. It is the game developer's issue (sort of), and it is a //lack of hardware// issue.
The complex truth, and I will attempt to explain, isn't that simple.
Your Mac Pro or Macbook only has a single line-out, that supports 2 channels at the maximum. Optical audio will only handle 2 channels as well- it's the same signal (in two channels) on a different medium, basically.
All PC soundcards that support proper 5.1 (save for a select few) have //multiple// line-out jacks for Front Left/Right, Center/Sub, and Rear Left/Right (3 plugs total for 5.1). Since your Mac/Mac Pro doesn't have this, you can't hook up a 5.1 speaker set and expect true 5.1.
You do have optical audio, however, this only works in 5.1 when a Dolby Digital signal is piped through the optical cable.
Dolby Digital works by encoding a 5.1 signal as a data stream, sending it to a receiver, where it is decoded and played back as 5.1 stereo. DVD's have this audio pre-encoded on the disk.
If you wanted 5.1 output from your games, they'd need to ether have the sound/audio data encoded as Dolby 5.1, or support encoding on the fly to take a 5.1 signal, encode it, and pipe it out the optical audio plug. Xbox360 does this, because they've licensed the technology from Dolby- as have the game developers.
Unfortunately, none of the developers for Macintosh gaming have yet to include live Dolby 5.1 encoding (I think Doom 3 had a beta patch that did- I could be wrong).
If the game doesn't support the above feature, then you only get basic 2 channel audio.
*Do not buy a Fireface 800.*
This is a professional audio interface (like an external soundcard). While it supports 5.1 output via 6 individual outputs, you need SPEAKERS that have +built in amplifiers+ (called a Studio Monitor). Not just one amplifier- all the speakers have it built in and take a balanced stereo input.
You're looking at $1300 for the Fireface 800, and another $200 per speaker. This is not cheap, is not meant for gaming, and is not consumer grade equipment. It's pro audio, designed for Logic 8 and similar.
Even if you did spend the money, trust me, I'd know... I have a 5.1 setup running through an Apogee Ensemble (a $2000 "soundcard"), and I do not get 5.1 support from Quake 4, C&C 3, or any other game. I only get 5.1 surround from my audio production in Logic 8.
To recap, since this has been asked many times- and I don't want you wasting your money here (just trying to be helpful!)...
*There is no simple or cost-efficient way to get 5.1 from your Mac, other then while playing a DVD movie.*
I would highly recommend that you buy a very good pair of 2.1 speakers with a Sub woofer. Maybe even a pair that takes an optical input for audio. If you really want to spend the money to *watch a DVD in surround sound,* then you can... And it'll work wonderfully, but gaming will not give you surround sound at all.
*Again- There are no games out that support 5.1. Just because you technically support Dolby 5.1, doesn't mean the applications are aware of it and can utilize the 5.1 surround.*
Edit: I may have neglected to also mention that the Firewave unit will support 5.1 properly through 3 separate plugs (much like a PC soundcard does), however the only game I am aware of that supports this is Unreal Tournament 2003 for Mac (or was it 04?), with an experimental patch for 5.1 via OpenAL. Last I heard, it worked okay, but crashed occasionally.
Most of the other games out there just don't support 5.1, period (probably due to the lack of hardware on the Mac computers from the factory).
-SC
Message was edited by: ScottishCaptain -
What is the best way to get rid of unwanted footage permanently
I have to shot for the bin on some projects working without a script. I then can be under considerable time pressure to get something out so don't have time to to review properly during the log and transfer process as I might have multiple projects going on. What is the best way to get rid of the useless footage for good. An example is in iMovie you can mark footage as trash and then empty the trash and it trims the original clip for good, very good for saving hard drive space on the move.
Any ideas how to d this in FCP????
Have thought about the whole media manger thing but must admit to ignoring this aspect so far. Do it by moving selected clips in a project in media manager????
Have googled this to death... Thanks for all your time.
APYep,
Media Manager is the way to go.
Read the manual aout it.
It is all explained in there.
Rienk -
What's the best way to get user testing of our app (we're based in the UK)
Hi all.
We've just developed our first app for Palm and would really like to get some feedback from Palm users (our app allows users to take photos and send them as real printed postcards. We'd be very happy to give users free postcards in exchange for feedback).
The problem we have is that Palm users are pretty sparse in the UK. We've found that user testing with non-Palm users becomes handset testing rather than app testing. We have to teach them how to use Palm ("Where's the back button?") and so the testing mainly focuses on the particularities of Palm rather than our app. Plus, we don't benefit from the user being able to compare to other Palm apps.
Any advice on the best way to get feedback from Palm users? Especially as they'll need to download the SDK and install our app using it in order to get it onto their phones.
If any of the users of this forum are interested in giving the app a go and sending us feedback, I'd love to send you the IPK and then chat. Just send me an email using [email protected]
Our app is available for Pixi+, Pre+ and Pre2.
Thanks,
Freddie.
Post relates to: Pixi Plus p121ueu (SFR)Hello freddie:
Welcome to the Palm Forums. Thank You for the offer. I highly suggest offering it up
to our many enthusiasts on Twitter as a beta with the #webos hashtag or joining
the Precentral.net community and list it in a topic there, homebrew beta. You would
get better beta response if you Package your app and put it in an ipk to simplify
the install.
Hope that helps... Best of luck with your app!
notimeoff -
I cannot get itunes to work/install on myPC. I am running windows 8 in a 64 bit machine. I also want to purchase books via itunes for my Nook. Are you deliberately excluding PC owners so we cannot use ituens on our computers???? I have selected a community but have no idea what community I should be working with. Can somone explai these communities to me? Also. you don't allow much time to go thru the sign up process. I had to start over SEVERAL times as you kept timing me out. Jesus...when people are signing up for the first time, we have no idea of the questions that will be asked. Give us a break and give us time to sign up. Not everone is disability free and able to go thru your process quickly...you are NOT user friendly. You should be for people who are wanting to join your community. I used to want an Apple product but now that I have had first hand experience with your web page, I think I will probably stay away from Apple products. VERY DISAPPOINTING
Jan 11, 2014 10:26 AM Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING
Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING PC'S in response to Birdlover1
Post over in the iTunes for Windows forum, here:
https://discussions.apple.com/community/itunes/itunes_for_windows
sebastian -
I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?
Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.
-
What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera?
What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera? It says the utility disk is a PowerPC app and that is no longer supported. What do I do now? I can't upload photos from my camera.
Also, I had the same problem happen when I tried to install an older version of Corel Painter. Are Macbook Pro users just NOT supposed to be able to use their laptops for the purposes they are best designed for?
-Frustrated new Mac user
Maybe you are looking for
-
Network Connection was Reset Error
Tried to sign into iTunes Store and received the following message. "We could not complete your iTunes Store request. The network connection was RESET! What is the problem. I am using Windows 7 and everthing else is working fine Internet service etc.
-
I have adobe Photoshop element 6
I can't open my adobe photoshop element, the error message says: This application has requested the Runtime to terminate it in an unusual way. Please contact the application support team for more information. I need help for this question. Dan
-
hi, i have new iPhone 5 .6.0.1 after i got it , i restore the data from my iPhone 4 but i have still the Badge On Settings Icon still that show me that i have to update and in my software update . it's show "your software is up to date" how can i rem
-
SDHC card reader in Satellite A300-1MX?
Hi everyone, i bought a Toshiba Satellite A300-1MX back in October 2008, and now i wanted to buy an SDHC card, but I was wondering whether my laptop would support this "new"-ish card. The reason I want an SDHC is because it comes in bigger volumes. S
-
Email rescue with external hard drive
My old iMac got drowned, so I took out the hard drive & installed it in a Firewire external device, which I hooked up to my Powerbook G4 867MHz. Everything works fine, except I can't access my emails - it wants to use the Powerbook's Mail program, wh