I want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?
i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?
"At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
Personally I would double these amounts and add to that the diskspace needed for your Windows games.
Stefan
Similar Messages
-
I installed Mountain Lion OS on my Mac Book Pro and now WORD for Mac and Fluenz Spanish program do not work. How do I reinstall original OS and scrap ML?
ThanksMy previous answer still stands: Restore from your backup taken before you upgaded to Mountain Lion. For example, a Time Machine backup, a Carbon Copy Cloner clone, or a commercial backup service. Not the disk that came with your computer (which is how I read "OS back up disk").
If you reinstall the original OS from the disk that came with your computer, it will wipe out everything on your computer. (The installer won't install an older OS over a newer one, so you'll have to wipe the disk first.) Then you'll need to restore your data from your backup and reinstall applications like Word. -
Installing Windows XP 2002 Sp2 On mac book pro, Boot Camp
I have a mac book pro and i want to install windows XP on it, but i ran into a problem.
While using boot camp i followed the instructions and i got to the point where Windows XP is supposed to ask for partition drive, but in my case it gives me an error saying that Windows XP disc is not valid. I bought my Windows XP Sp 2 Disc at wal mart couple of years ago. It works fine on my HP PC but not on this one. What is the problem and why does it do that?You should ask in the Bootcamp forum http://discussions.apple.com/category.jspa?categoryID=237
-
I put a windows xp cd in my macbook pro and rebooted the mac,mac doesn't come up any more and the cd doesn't come out,what can I do now?
Hossein,
As Guido said, you can use BootCamp to partition the drive. If you want to install, or reinstall Windows. You would launch BootCamp and it will actually guide you through the installation, you will only need to decide how large a partition you want. I would use BootCamp, I would not use disk utility. When you have installed Windows and you want to boot into windows, when you start your MBP hold down the option key, this will give you trha option of booting Mac OSX or Windows.
Joseph -
its always the apple ID of the owner who had the macbook before. All the info of the owner before has been remove. I check in the preference systeme under user and groupe and theres nothing. i put my apple ID and also my password.....
help help
tyThe first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It is not safe to use a computer with software installed by a previous owner.
1a. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
1b. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
2. Partition and install OS X
If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
3. Other issues
If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
I'm having problems installing ps cs2 on a new mac book pro
Im trying to install ps cs2 on my new mac book pro and i get a message that says unable to in stall contact the software company. I've used this on two other computers. the last computer had issues and dumped photshop onlong with other software.
You won't be able to install CS2 on a new Intel-based Mac.
CS2 for Mac was written for PPC-based Macs and will not install or run on new Macs. -
Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
ChiponnThere's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-) -
I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.
Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.
-
If I want to install windows 8 in on my mac through boot camp, can I install windows 8 directly from my pendrive?
I do not have bootable CD.
whats the procedure?Hi Rajthumar,
Welcome to the Apple Support Communities!
You can install Windows 7 or Windows 8 ISO using a USB flash drive. Please read over and reference the attached link for information on using Boot Camp to install Windows.
manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_10.8.p df
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Have a great day,
Joe -
I have tried to just install the new version of itunes from the apple website, it looks like it downloads but after 5 minutes at the end of the install it says 'old version of itunes cannot be uninstalled, please contact support.'?
Is there anyway I can remove the version of itunes from my computer? i dont mind if i lose the music/content I already have on my itunes. I need to do this as i have just received the iphone 4 and need to install the newest version of itunes.
Many thanksI need to uninstall my old version on itunes and install a new version, i cant uninstall from Programs and Features, a message keeps coming up saying 'The feature you are trying to use is on a network resource that is unavailable.'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
I had a windows laptop, and I save files like photos,documents, videos and other things on an external hard drive, and now I want tomove those files to the Mac book Pro, and then move those files again toanother external hard drive 1T. My question is: Is it possible? Doing this willnot affect the files that I had in windows? No information is lost? or how cani do it?
Connect the external drive to your Mac and drag the files from it to your Mac's internal drive. Then dismount and disconnect the external drive, connect the 1TB external drive, and drag the files from the internal drive onto the external. Nothing will have been deleted from any of the drives up to this point; the files will only have been copied. Verify that the files are readable. There's no reason they shouldn't be; this is just a precaution.
Now if you wish to delete the files from any of the drives, drag them to the Trash, and Empty the Trash while the drive from which they came is still connected. If you disconnect the drive before emptying the Trash, the files you were trying to remove from it won't be deleted. They'll remain in the Trash and continue to take up space on the drive.
Note that if your external drives are in NTFS format, you won't be able to write anything to them or delete anything from them, though you will be able to read and copy the files they contain. The NTFS disk format is read-only to the Mac OS, unless you have a third-party NTFS driver installed. To make your drives cross-platform readable and writable, you must reformat them in the FAT32 or ExFAT format. -
hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?
On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode -
i have photshop cs3 for windows but i now have a mac book pro and would like to install it on my mac where can i go to download it for mac and will my prod key work ?
Serial numbers for older versions do not work across platforms.
At one time, when the product was current, you could get Adobe to switch you to the other platform, but I don't know whether Adobe will do that for old versions. I do know it's not going to work if you try to use your Windows license for a Mac installation.
-Noel -
I bought InDesign (Creative Cloud) on my Mac Book pro and recently bought an iMac. I want to use the software on my iMac now, can't figure out how?
All you need to do is install Adobe Creative Cloud application using which you can download InDesign cc app .
https://creative.adobe.com/products/creative-cloud
Reference :
https://helpx.adobe.com/creative-cloud/help/install-apps.html
Maybe you are looking for
-
IPod video not recognized by iTunes after bad disconnect
I recently disconnected my iPod without ejecting it first, (disk mode is enabled), and I had done it a few times before without a problem, so I figured why not. But this time it didn't work out. All of my music, videos etc are seemingly erased from t
-
F.19 show accrual amount, how to clear it?
Hi, I come across with an issue. We wrongly posted an debit note to vendor. It supppose to post an invoices to system. We have done payment and bank recon, it no possible to reverse the Debit note. This amount is hang at accrual there. F.19 is still
-
ICal subscriptions won't update in iOS7
Since updating to iOS7, some iCal subscriptions don't update, TripCase, particularly. Suggestions?
-
Onlocation can't connect to my camera
I have a new Averatec Laptop with built firewire port, Vista 64, CS4. Everything worked fine until I installed a Firewire PC express card for an external hard drive. I ended up uninstalling and returning the card because it couldn't power my hard dri
-
How can I force the Disk Cache on with Apple Raid Card?
I have an apple raid card in my mac pro that has now had it's battery fail twice. I don't really want to keep putting money into this and would rather just force the disk cache on and hope my UPS works, I don't use this box for real work anymore anyw