I want to install windows 8 on external hard desk on mac . how i can install that

Hello kindly i want to install windows 8 on external hard desk on my macbook pro How . AND Witch programe i must use use it

Windows will not install and boot from an external drive using Bootcamp Assistant. You could install Windows in a virtual machine using Parallels, Fusion, or VirtualBox.

Similar Messages

  • Installing Windows to external hard drive or using parallels?

    Will installing Windows on external hard drive protect mac from viruses better than parallels? Which option is more sound, installing windows on external hard drive or using parallels? My main concern is mac protection. Thanks

    Hi,
    Thank's for your reply.
    Using Parallels and creating a virtual machine, I think it should be possible installing Windows to an external hard drive, shouldn't it?
    Message was edited by: Oleguer Vilella

  • Boot Camp will not let me install Windows via external hard drive

    Hi,
    I'm having problems installing Windows 7 on my MacBook Pro. I have the iso file on my external hard dirve and have went to Boot Camp but the following message comes up:
    "The startup disk cannot be partitioned or restored to a single partition.
    The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
    At one point i just clicked OK and let Boot Camp install the selected tasks, which formated the disk, copied the Windows files and downloaded the Windows support software but another message came up:
    "Install this Windows support software after installing Windows"
    It then only gives me an option to Quit...
    I would like to add that i tried to install Windows a few days ago and everything was working well up until instead of clicking on "customize" to continue the installation i clicked on "upgrade" then it asked me to remove disk and reboot the computer, i did that and it didn't work. Luckily i got that sorted but wanted to try and install Windows again as it didn't end up getting it installed and this is what is happening now...
    Can someone suggest to me what might be wrong?
    Thanks in advance.

    My other post has been deleted. I will reply to you on this post instead.
    I dragged down the Macintosh HD partition via the small triangle at the bottom right hand side of it. It now looks like this:
    Is it back to normal now? Can i install Windows now or do i need to do anything else?
    Thanks a lot for your help!

  • Installing Windows on external hard drive

    Does anone know how I can install and run Windows from an external hard drive? I use only a couple Windows applications and want to clutter my MacBook internal hard drive.
    Thanks in advance, Ron

    RKD56 wrote:
    Does anone know how I can install and run Windows from an external hard drive? I use only a couple Windows applications and want to clutter my MacBook internal hard drive.
    Thanks in advance, Ron
    Check in the bootcamp forum here:
    http://discussions.apple.com/forum.jspa?forumID=1244
    You might also consider using a Windows Emulator, some of which support many Windows apps without requiring Windows at all.
    You can search the net for them.

  • Using Current Windows-based External Hard drive on Mac

    Hello,
    I have a MacBook Pro now. I have BootCamp installed with Windows Vista. Working fine. I also have a Western Digital 160 GB external harddrive with data on it from my old Windows only computer. In other words, it is formatted with NFTS.
    I want to be able to do one of the following things:
    1. Partition the external drive in half so I can use half of it for new Mac data while keeping my old Windows data
    2. Seamlessly use the external drive as is between Mac OS X and Windows being able to transfer data. Right now, if I boot into Mac OSX, I can see the drive on the desktop and actually see the files and folders. But if I try to drag anything to the drive, I get permission denied.
    Any hints here? Basically, in a nutshell, I am going to have data from both Windows and Mac OSX that I would like to save on the same external hard drive
    Thanks.

    You won't likely be able to make one hard drive with two different partition types if it is already partitioned (partly anyway) in Windows in NTFS. Mac Disk Utility won't deal with the unpartitioned space AFAIK.
    It cannot hurt to try in Disk Utility and see if it shows the 60GB only or refuses to mount at all which I suspect will be what happens.
    Anything but My Book is the answer (I have seen at least a dozen My Book complaints here) - normally with macs there are a few trusted makers and one interface - firewire (NOT USB). I use LaCie drives - 3000GB worth - and for portable I have an OWC, they make very high quality cases and drives and nice and small.
    I have a few others that I do not rely on like a 320GB USB drive that was $100 and the drive inside is worth more than the whole external drive actually cost which is why I bought it. And a small USB Maxtor for use with Parallels since Parallels won't see Firewire drives.

  • Installing windows on dedicated hard drive on Mac pro

    Hi
    I would like to install windows vista ultimate on its own hard drive on a mac pro- but I haven't been able to do it. I tried using boot camp but when it comes time to install windows on a specific partition I receive an error message that it won't install because the drive is not formatted to NTFS. On the other hand there seems to be no way to format to NTFS either through the Mac os or the windows installation dvd prior to this step- catch 22!!
    Any help is welcome.

    Hi danton,
    that's odd since Vista is supporting the GPT partition type.
    If I remeber correctly from another post from you, you have a full Retail version of Vista which includes the 32-bit and the 64-bit version, right ?
    Are you trying to install the 64-bit version when this error occurs ?
    If so, power down your Mac Pro and pull out all drive bays/harddisks leaving only the one harddisk in on which you wanna install Vista.
    Then boot your MP of the Vista DVD and try to install.
    (That's an old trick courtesy of 'the hatter').
    MAybe it helps.
    Stefan

  • Installing Windows XP NTSF hard drive in Mac Pro

    I'd like to migrate from PC to Mac by simply installing the NTSF C: drive from my Windows XP PC into one of the drive bays in a Mac Pro, installing Boot Camp and then using the option key to boot into either OSX or XP.  Is it that simple?  I gather I would have to install Boot Camp drivers on my C: drive, and probably install drivers for the graphics card.  There would be 2 drives in the Mac Pro, an OSX drive and an XP drive.  I'm really not a fan of drive partitions.  Or is it better to do a clean install of XP on the second internal drive?

    No. The Window system file must be on the system disk in order to boot.
    You need to read http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf
    Allan

  • I'm using bootcamp 4.0 on OS x Lion. apparently i can only install windows 7 on it. is there any way i can install windows xp on bootcamp instead?

    i only have a windows xp sp2 installation cd. but it cant be read when i use bootcamp 4.0.  what can i do?

    Boot Camp
    Apple Support Boot Camp
    And for MacBook Pro questions:
    MacBook Pro
    MacBook Pro Apple Support

  • How to install windows xp on bootcamp on new Mac mini?

    How can i install windows xp on bootcamp on new Mac mini?
    I know that i should get an external usb optical drive, but buying such hardware for one use is a waste of money. Is there any other method?
    I currently own a MacBook white, and really like the configuration. I it possible to copy the image of bootcamp to new mac mini? If so, what will happen to hardware and drivers?

    Admiralali wrote:
    Let me get this right:
    1- copy the exact image of the winxp installation dc to USB
    2- start bootcamp assistant, go through everything, till rebooting
    3- boot from USB (hold ALT and select the USB volume)
    4- go through winxp setup and done!
    Am I missing anything?
    I think that USB would be readable only on Mac os or winxp, but will the winxp installer read from USB?
    Correct me if wrong.
    Having read further websites, I am now a bit more dubious you can do this, at least with an XP installer.
    However if you have a USB memory stick and an existing Windows computer (even a Boot Camp one) or can borrow one you could try using the free WinToFlash utility to make a supposedly bootable USB memory stick of the installer. See http://wintoflash.com/overview/en/
    The problem is XP predates EFI firmare and XP only really knows BIOS firmware. As such (supposedly) XP would have problems booting from a USB device fully - it might lose connection part way through. Windows Vista and 7 do support EFI firmware.
    The other approach I mentioned of temporarily moving the hard disk from the Mini to the MacBook so you can use the MacBook internal CD/DVD drive would work - be careful of the cables. Fortunately a new Mac mini and an old MacBook are two of the easier models to get at the hard disk. See http://www.ifixit.com/Guide/MacBook-Core-2-Duo-Hard-Drive-Replacement/514/1 (they also list other MacBook models) and http://www.ifixit.com/Guide/Installing-Mac-Mini-Mid-2011-Hard-Drive-Replacement/ 6422/1
    Regardless of which method you try, the first step would be on the Mac mini to run Boot Camp Assistant and to create the partition for Windows. Then via either method try booting from a Windows XP installer.
    As I have taken Macs apart many times, I personally might go the swapping the hard disk over route.

  • I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

  • How can I install window 8 on external hard drive on mac mini

    So, I have mac mini and I'd like to install win8 on external hard drive and can anyone give me guides to do it?
    also I wonder would I be able to run win 8 after installation using parallels desktop?
    thanks in advance

    I have to agree that Windows8 is a waste of time, especially if you don't have a touch screen and compatible apps.
    However, the latest version of Parallels supports running Windows8, Parallels can either run Windows from a 'virtual disk' file which can be stored wherever you want including on an external drive, or it can also be configured to run Windows from a Boot Camp partition created using Apple's Boot Camp Utility.
    See http://download.parallels.com/desktop/v7/update2/docs/en/Parallels%20Desktop%20U ser's%20Guide/32733.htm
    In order to run Boot Camp from an external drive and therefore be able to setup the Boot Camp partition on the external drive you first have to install and run OS X on the external drive. Then the Boot Camp utility will let you add the Boot Camp partition on the external drive. You cannot run OS X and the Boot Camp utility from an internal drive and try adding the Boot Camp partition to the external drive. The Boot Camp Utility only lets you add the partition on the same physical drive it is running from.
    Personally I have legal XP and Windows7 licenses (currently using Windows7) and even if the Windows8 upgrade was totally free of charge I would not bother with it. I would also not bother with it at work as an IT Manager.

  • I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well??

    I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well?? plzz help
    Merry Christmas

    Repartition and format the drive for a Mac:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Can Flash Player be installed on an external hard drive?

    I have this game I am trying to install on an external hard drive that requires Flash Player and even though it is installed on my computer the game keeps popping up with Flash Player is required for this install. Would you like to install it now? Is there any way to install Flash Player on my external or get the game's installer to recognize it being on the hard drive. I don't want to install the game to my computer. Thanks for any help.

    Flash Player is installed on the Windows system32 and syswo64 folders; it cannot be installed anywhere else.
    What does that game require: the ActiveX control, or the plugin?  If in doubt, install both.

  • Install data from external hard drive?

    Hi, we have our old macbook data saved on external hard drive (old laptop had water damage but able to retrieve data). I now have new macbook, how do I install data from external hard drive to new macbook? Is it super easy? I didn't want to set up new laptop until I could understand how to install all our old data. Thanks

    Do you have the appropriate cable to connect the external drive to to new Macbook?
    If you do, the rest is easy. Connect the drive and start up the new Mac. The first steps in the setup will be to enter information about yourself, etc. etc. As you proceed you will be asked if you want to bring in data from another place. Just follow the directions, and the Mac Setup Assistant will do everything for you.
    The critical part is making sure the external is corectly connected to the new computer.

  • I have a macbook and I'm having trouble backing up my pictures on an external hard drive.  The Macbook won't install the backup drive soft ware? It is a new Sea Gate hard rive from costco.

    I have a macbook and I'm having trouble backing up my pictures on an external hard drive.  The Macbook won't install the backup drive soft ware? It is a new Sea Gate hard rive from costco.

    You don't want to install the software that came with the drive, you don't need it and it will be problematic. Connect the new drive, open Disk Utility, select the new drive and partition it using the GUID partition scheme, then format it as Mac OS extended journaled and it will be easy to use with your Mac.

Maybe you are looking for