I want to know how to create accessible pages documents for visually impaired. Is there a manual or guide available?
I work for an NGO that has a lot of visually impaired staff. When I create pages documents and then export to PDF I often get feedback that the document is not very accessible. I have been searching for a manual or guide on how to ensure my documents are accessible, but cannot seem to find
I have pages 5.0.1
You need to add accessibility, after Exporting the pdf, with Acrobat Pro.
I don't know of any software except maybe Indesign or Quark XPress* that actually builds it into the pre-pdf document.
These references should help:
http://webguide.gov.au/accessibility-usability/accessibility/pdf-accessibility/
http://www.adobe.com/au/products/acrobat/pdf-accessibility-wcag-508-compliance-s tandards.html
http://www.adobe.com/accessibility/products/acrobat/training.html
Peter
* Quark Xpress definitely did not have it up to QXP 7.5 but I can find no later references, so probably it is only Indesign.
Similar Messages
-
I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?
Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
If that solution is not flexible enough, consider using the very affordable (12$) Elements+ add-on which offers a 'meta stamp' script :
http://elementsplus.net/v5/en/meta-stamp.htm
Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview... -
I want to know how to turn a word document into a jpeg so I can put the document on Facebook as a picture. I have made posters and if I do a print screen they are unable to be read, or if i turn it into a PDF there is no save as jpeg??
iOS device backups are stored in your iTunes library.
Move your iTunes library to an external drive. -
I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?
Are you on CC or standalone perpetual licence?
If the former I believe you merely download LR from the CC site onto your iMac and log in and off you go.
If the latter, download LR onto your Mac from the perpetual licence site (not the CC version), install it and use the same licence number as with your PC. -
How to Create a Billing Document For SalesOrder
Hi Guys,
Any one please Explain me how to create a Billing Document for salesOrder. give me step by step procedure so i can easily understand the terms.Thanks in advance.
Thanks
Kiran.BHi Kiran,
Normally a billing doc is created after a sales order-->delivery.
U can create a sales order w.r.t a Contract or another sales order.
In your case, its possible only for sales Returns.
pass billing doc number to ORDER_HEADER_IN-REF_DOC in BAPI_SALESORDER_CREATEFROMDAT2.
Reward points if helpful
Regards,
Hemant -
I was at Apple Store yesterday and they created a pages document for me. When I got home and tried to open it, I get a message that I need a newer version of Pages. I see the image before I push "open". The 'kind' is pages publication. The file does not appear in the 'open recent' list.
Just be careful with Pages 5, it is not strictly an upgrade.
Apple has actually removed over 90 features and some work can be very difficult in the newer version.
It was all done to make it more interchangeable with the inferior iOS version:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter -
I want to know how to setup password expiry notification for outlook 2013 and 2010 in office 365
On cloud mailbox non federated how set password expiry notification for all users which is created on cloud for accepted domain mail box only configure outlook,
any other option on exchange admin center for the same,
I want to know how to setup Outlook 2013 and 2010 to receive PASSWORD EXPIRY NOTIFICATION without log in domain,Hi
As per the information and details provided by you, to set up password expiry notification, please follow these steps: -
I suggest you run Office 365 desktop apps reffering to the steps below: -
Step1: - Login to Office 365 Portals.
Step 2: - In the right pane, click
Downloads under Resources.
Step 3: - Click Set up under
Set up and configure your Office desktop apps.
Moreover, please confirm the password policy by the
PowerShell cmdlet.
Step 1: - Install Micrsoft Online Services Module and connect to Office 365.
Step 2: - Run Connect-Msolservice command.
Step 3: - Get a password policy by the following PowerShell cmdlet:
Get-MsolPasswordPolicy –DomainName yourdomain.com
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
I need to know how to create a pdf document larger than 129 inches from MS Project 2007
I am completely new to Adobe Acrobat Pro 9. I need to know how to create a PDF which is larger than 129 inches for use on a plotter from MS Project 2007. I have searched the Adobe support articles with no success. Any help would be appreciated. Thank you.
Thank you. I have tried that but it will only let me go to 129 X 129 inches, no larger.
Sincerely,
Bill Stern
NSD IT Support
22289 Exploration Drive
Suite 305
Lexington Park, MD 20653
Phone: 301.862.4577 ext 10
Fax: 301.862.9828
Email: [email protected] -
LSMW me51n, how to create one PR document for all the records in the file
HI all,
I need to create LSMW for t-code me51n -Create Purchase Requisition. I`m using Bapi BUS2105, method CREATEFROMDATA, idoc message type PREQCR, basic type PREQCR03. The problem is that the LSMW is creating different idoc and different PR document for every record in the source file. My requirement is to create one PR document for one source file (Every source file is different Purchase Requisition) . I`m trying to do this with writing some code(global functions ) in the 'Mapping and conversion rules' events - BEGINOF_TRANSACTION_, ENDOF_TRANSACTION__..., but i`m not very sure what exactly i`m doing .
Please help me resolve this problem, any help will be appreciated .
Best regards, Emil Milchev.Thank you for you answer.
But I have found faster way of doing it - two source structures, one HEADER and ONE ITEM.
HEADER: one empty text field and identificator for it.
ITEM: everything else.
Then everything was just fine, i`ve mapped the different IDOC segments by PREQ_ITEM fields (equal values in the source file : 10-10-10..., 20-20-20,.... etc.) and put all required fields for my LSMW
SOURCE FIELDS:
Z_ME51N_V2 - MASS_UPLOAD - CREATE create
Source Fields
UPFILE upload file
IDENT C(010) ident
Identifing Field Content: header
TEXT C(001)
UPFILE2 123
IDENT C(010) ident
Identifing Field Content: item
BSART C(004) Document type
BANFN C(010) Purchase requisition number
BNFPO_FOR_MAP N(005) Item number of purchase req. for MAPPING acc.
BNFPO N(005) Item number of purchase requisition
KNTTP C(001) Account assignment category
PSTYP C(001) Item category in purchasing document
MATNR C(018) Material Number
WERKS C(004) Plant
LGORT C(004) Storage Location
MENGE N(013) Purchase requisition quantity
EKGRP C(003) Purchasing group
KONNR C(010) Number of principal purchase agreement
KTPNR N(005) Item number of principal purchase agreement
LIFNR C(010) Desired Vendor
FLIEF C(010) Fixed Vendor
AFNAM C(012) Name of requisitioner/requester
PREIS AMT4(011) Price in purchase requisition
ABLAD C(025) Unloading Point
WEMPF C(012) Goods Recipient
PS_POSID C(024) Work Breakdown Structure Element (WBS Element)
KOSTL C(011) COST_CTR v bapito ?
NAME1 C(040) Name1 - Name of an address
NAME2 C(040) Name2 - Name of an address 2
STREET C(060) Street
DELIVERY_DATE C(008) Date on which the goods are to be delivered
TEXT C(132) item text
STRUCTURE RELATIONS :
Structure Relations
E1PREQCR Header segment <<<< UPFILE upload file
E1BPEBANC Transfer Structure: Create Requisition Item <<<< UPFILE2 123
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt <<<< UPFILE2 123
E1BPEBANTX BAPI Purchase Requisition: Item Text <<<< UPFILE2 123
E1BPESUHC Communication Structure: Limits <<<< UPFILE2 123
E1BPESUCC Communication Structure: Contract Limits <<<< UPFILE2 123
E1BPESLLC Communication Structure: Create Service Line <<<< UPFILE2 123
E1BPESKLC Create Comm. Structure: Acct Assgt Distr. for Service Line <<<< UPFILE2 123
E1BPESLLTX BAPI Services Long Text <<<< UPFILE upload file
E1BPMERQADDRDELIVERY PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPMERQADDRDELIVERY1 PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPPAREX Ref. Structure for BAPI Parameter EXTENSIONIN/EXTENSIONOUT <<<< UPFILE2 123
MAINTAIN FIELD MAPPING AND... :
the MAPPING between two IDOC`s segments:
In first segment:
E1BPEBANC Transfer Structure: Create Requisition Item
Fields
PREQ_NO Purchase requisition number
Source: UPFILE2-BANFN (Purchase requisition number)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_NO = UPFILE2-BANFN.
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO (Item number of purchase requisition)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_ITEM = UPFILE2-BNFPO.
In second segment :
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt
Fields
PREQ_NO Purchase requisition number
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO_FOR_MAP (Item number of purchase req. for MAPPING
Rule : Transfer (MOVE)
Code: E1BPEBKN-PREQ_ITEM = UPFILE2-BNFPO_FOR_MAP.
After that everything was OK . -
Hi guys! I'm new to Photoshop, and I want to know how to create a 3d scene.
I have a class in school where I need to create a 3D model of a scene. anyone know how to turn this into 3d?
Use the shape tools, like the pen tool for example and trace the back wall, then as a separate shape trace each side wall, the shape can be fill with a color. Then convert the shapes to 3d. Don't forget about the ceiling and the floor.
The register will be a separate shape (this would be a good time to remove the slats in the register, before conversion.
Speaking of removing, you can remove the door location from the wall before conversion as well.
Then you can create a shape for the front of the door and the front of the door casing.
Keep in mind that objects on the side are skewed, so you need to create unskewed shapes and allow the 3d process handle how it looks in the final render. (other wise, your door, the hole for the door and the door casing will not look right.
So basically you are tracing the front of all the objects, then photoshop handles the depth of the objects. (by front I meant what you would see by rotating your head around the room not from the picture)
The fire hydrant is basically a cylinder, which photoshop can create for you, the top discharge handle on the other hand may be beyond doing, you can try it, but you may give up, since photoshop is not really equipped to create odd shapes. (If it comes down to it, it would be better to make a simplistic shape two rectangle for top and bottom handle and a cylinder for the spout and a cylinder for holding the handle up from the hydrant. And call it a day )
Door knob is a basic cylinder plus a smaller cylinder behind the knob to extend it from the door.
The phone and cigarettes are nothing more than basic rectangles.
I don't know if you caught on yet, but I am describing basic primitives which you build upon. Always try to break down an object to it most basic primitives. I assume you are familiar with geometry. A primitive is a rectangle, triangle, cylinder, sphere, cube, circle, etc.
You should find some videos on youtube, adobe tv and kelby tv about 3d modeling. -
Need to know how to create 'contours' around artwork for printing?
Hello Friends,
First, let it be known that I am new to InDesign.
Actually, this will be the first time I will be using it!
I created a logo in Photoshop, for a friend to take to the printers which would be transferred to a plastic sticker.
The person at the printers told my friend that he would need to have contours in the artwork. When asked how could that be accomplished, the printer guy said that it could be done through InDesign...
I have access to InDesign CS5, but am at a loss as to how to figure out how exactly to accomplish this.
I have searched both Google and here, to no avail.
Any help would be highly appreciated.
Warm Regards,
Isa.Thank you for your reply. I am creating a new OA Framework form to display Oracle project and tasks under the project. I was able to create a tree for one task and its subtasks, but I want to make the project as the top most node, and have all the top level tasks as the project's children. I created a view to make the project like a parent task for all top level tasks, and created a VO based on this view. But my tree structure messes up. Do you know where I can find sample code or tutorials on OAF tree structure? I greatly appreciate your help.
-
Anyone know how to create/use particular icons for stack icons?
Hiya!
I currently have the following folders as some of my individual stacks in my dock.
Pictures
Applications
Music
Movies
Home
Now if I right-click on any of them and select 'Display as Stack' then the first file in the folder gets used as the dock icon for that stack folder. So obviously this could change from time to time as more files get added to folders.
Does anyone know how I can use a particular picture/icon to remain as the icon for a specific stack please?
So for example I would like to drag the 'Downloads' folder down to the dock and have it as a stack. But it never uses the circular green icon as its icon when I select 'Display as Stack'. Instead simply displays the stack as a blue folder with an arrow pointing down. Anyone know how I can set it to the circular green icon please?
Thanks for any help, its appreciated.
Shams.yes, you need to apply a custom icon to your Downloads folder using the link I gave you. then that icon will display in the dock instead of the blue folder icon. there are lots of places to get custom icons like Interface lift
http://interfacelift.com/icons-mac/
you can also use Liteicon http://www.freemacsoft.net/LiteIcon/ or Candybar http://www.panic.com/candybar/ to easily manipulate system icons. -
I do not have the activation code for this PC and need to know how to get the software loaded back on it after a clean install of the OS and other programs.
If you use any additional subscription services to Adobe Reader, they are activated with your Adobe ID & password.
-
How to create a page-definition for bounded task-flow?
I should be able to create a page definition which declare all bindings required for a bounded task flow.
How do I do it in JDeveloper 11.1.1.2?
How do I navigate to the page definition when I am in the bounded task flow "Diagram tab"?I found out the following:
1. To create a page-definition file for a bounded task flow
Right click on the "Default" activity (not a view activity) of the bounded task flow, select "Create Page Definition" from the context menu.
2. To go the page-definition file for a bounded task flow
Right click on the "Default" activity (not a view activity) of the bounded task flow, select "Go to Page Definition" from the context menu.
My new question is:
In JDeveloper 11.1.1.2, how do I create page-definition for a bounded-task-flow if all activities are view activities (page fragments) ?
How does JDeveloper I want to create page-definition for the task-flow instead of create page-definition of the page fragment or the page? -
How to create one GR document for mutiple Purchase orders
Can you please explain me in SAP - How to create one Goods Receipt document for reference of Multiple purchase orders.
Dear Tanuj,
Both Rama & Stephen are correct.
You can take Single GR for Multiple PO either in MIGO or MB01 as long as that POs belongs to same vendor.
In MIGO, after putting the PO press,enter, again give the next PO of that vendor .
If this solve your problem, close the issue.
With Regars,
Krishna Reddy
Maybe you are looking for
-
I need to open files in a folder within a photoshop action
I am writing an action (to be triggered by automator) to take three photos from a tethered camera and open, size, and crop them, and place them in specific locations on a template image to create two photo-booth strips side by side on a 4x6 print. I
-
Crystal Reports version comparison 10 - 2008
We're looking at upgrading from CR 10 to CR 2008, and want to find out the advantages and disadvantages in doing this. I've found the "What's new in Crystal Reports 2008" brochure. Interestingly, this doesn't say what it replaces, presumably CR 11 (w
-
Ask for username and password for XDB when download files
Hi, I have an application to upload/download files. While the user click on the file link for downloading files, a small window pops-up saying that "The server 127.0.0.1 at XDB requires a username and password.". Can anyone shred some light ? Thanks.
-
Hi Gurus, I am new to IDOC and needed to learn about the same.Please tell me some good stuff book that help me out. Is there any open project scenario that helps me in learning. Regards,
-
Does anyone know how I can increase the volume on my iPhone 5s without jailbreaking the phone? Any add-on I can buy? Any app? HELP PLEASE! (My iPhone 4's volume was great!)