I want to migrate email history to profile 2. It's available on the c-drive or usb drive it won't let me browse to the location when i click import.
We set up two profiles in Thuinderbird. Two addresses, Two address books, etc. I want to migrate email history to profile 2 in thunderbird. when I get to IMPORT it does not give me the option of browsing to the location of the outlook express file for profile 2. I just imports the profile 1 historical data. The email I want to import is on the c-drive and I have also put it on the usb flash drive. but I can't get to it to import it. If I just let it import, at brings in the profile 1 history to profile 2. Importing the history to profile 1 worked fine, by the way. I am migrating from outlook express on xp machine to window 8.1
https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/
Similar Messages
-
Won't let me browse to a picture when responding to email on website
After logging in to customer service at a website, I needed to attach a picture in the email reply.
A browse box was available, but clicking it did nothing. Worked fine with IE.You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
In some cases you may have to set an allow exception for pop-ups to make this work.
*See: Tools > Page Info > Permissions
Did you look for such an icon on the location/address bar? -
How do I keep my email password from remaining in Preferences? I want to enter it every time I get my mail. I upgraded to OS M Lion but it won't let me delete it from preferences (the password from Account Info). Once you enter the password, it keeps it permanently. i do not want that. It's worked prior to using M. Lion. Any suggestions? Also, The other pressing issue i have is, I DO NOT want ANY mail showing in my inboxes when Mail starts UNTIL i enter that password for each account. Instead of creating different user accounts for the MacBook, it's just easier this way. Or is it? If this is a permanent thing, then I may switch back to Lion. I guess I shoud've waited until the kinks were out before installing (**** Mac-head!)
Thank you all kindly for any suggestions & your time
Regards,
JCI DO NOT want ANY mail showing in my inboxes when Mail starts UNTIL i enter that password for each account.
That is simply not possible with Mail, and never has been. Anyone who uses your account can see all messages stored in Mail. The only true solution is to not let other people use your account. Let other people use the guest account, or if you share the machine with someone else, set up a separate user account for that person. This will also solve the problem of remembering the password. It will become a non-issue for Mail to remember your password if nobody else has access to your account. -
Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
If that's not what you see, post the contents of the window. -
I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive.
I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive. The internal drive is completely dead, it doesn't even show up in Disk Utility. I'm running 10.8.2 from the external drive. When I start Boot Camp Assistant, at the Introduction page, when I press the continue button nothing happens. Do I have to have internal drive to run Boot Camp Assistant? Can anyone provide me with the steps to dual boot, with his setup? Thanks in advance!
Hi maczimillon,
Only follow these steps, it works for my:
Open "System Information" and note your "Boot ROM Version" (some like MBP51.007E.B06)
Navigate to "Utilities" in Finder and open the package contents of -BootCampAssistant.app- with right click. Duplicate the "Info.plist" file to the Desktop e.g. and open that with Text Editor.
You must locate the keys "DARequiredROMVersions"and "USBBootSupportedModels"
Add new strings with the information of your machine under booth keys (step 1), always respect the format, such as: <string>MBP51.007E.B06</string> for the frist key and <string>MBP51</string> for the second key.
Save changes and replace the original plist file (it may ask you to enter admin pass)
If you proceeded correctly you will see the checkbox "Create a Windows 7 USB install disk" enabled in Boot Camp Assistant.
Then you can follow the usual Boot Camp installation using your WIN8 DVD iso image . The assistant program will proceed resizing your disk partition and installing necessary drivers for your iMac.
I strongly recomends you to use thirld party's bootloaders like rEFInd (rEFIt) because of the Apple SMC versions of some old machines should not be able to boot properly from external devices like USB drives. -
When i click import, then open external hard drive the bookmarks dont show. If i open the external drive via 'start/computer' i can see them in it ok,.
Yes, that is a JSON backup, so you need to remove the .html file extension and add a .json file extension instead.<br />
If Windows is stubborn and doesn't want to change the file type but merely changes the name to bookmarks.json.html then try to add quotes around the name when renaming or (temporarily) disable hiding the file extension.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
Note that restoring a JSON backup will replace the current bookmarks, so you lose any bookmarks that aren't in the backup unless you first export the bookmarks to an HTML file.<br />
Then you can import that file after you've restored the JSON backup.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
I have deleted a song from my library and want to re-download it. When I access my purchased items in the iTunes store, the song has the 'purchased' button next to it and won't let me re-download. Any suggestions for things to try?
While you can redownload most past purchases without charge, you can't redownload movies without paying again. See Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
-
To copy an arrangement section - verse, chorus etc - I click the verse or chorus I want to copy/move in the arrangement line. But when I open the edit tab the copy/cut options are gray and won't let me do it. Same w/command 'C' and 'V'.
Also, how do I send a song from my MacBook GB to my iPad GB so I can utilize the Smart Instruments in my song.Use the alt key to create a copy of an Arrange section by dragging it.
-
I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
Pop up is in safari from a third party website and won't let me do anything in safari unless I click on it. I don't want to click on it because it is probably a virus. I hae tried restarting safari and also the computer, but it's still there.
Thomas' answer is the preferred technique. Sometimes, these pop-ups will block you from quitting Safari. In that case, press option+command+esc, select Safari, and Force Quit. Then, use the shift key with Safari when relaunching it, per Thomas' suggestion.
-
I have Itunes but I want Ios 4.2.1 for my Ipod 2g but everytime I get on Itunes to get the download Ios 4.2.1 it won't let me.
https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/
-
When I click on a link from my emails it opens automatically through firefox. I want to disable this feature as I would like to go back to Chrome. I don't want to uninstall Firefox all together but I don't want it to be my main browser either.
Thank youThe only way to have such links not open Firefox is to set another browser the default browser.
That MozillaZine Knowledge Base article shows how to set another browser like IE as the default browser.
See Setting default browser manually:
*http://kb.mozillazine.org/Default_browser -
I want to migrate emails from Em client to Thunder, please help
I was using EM-CLIENT as email server but now I want to change to Thunderbird, please help me way out for transferring all my email, address-book, settings data from EM-Client to Thunderbird.
What kind of email account do you have? POP or IMAP?
-
I want to tranfer music off my old iPod but it says I can't because the music is linked to a different version of iTunes store. What do I need to do?
Found a resolution. Got a FREE introductory offer from the net and used it to download my music to my computer and then could drag over to iTunes.
-
I just want to install photoshop to my PC so I can edit photos. Does anyone have the link to do this?Photoshop General Discussion
Photoshop CC is not cloud based. It is installed from the cloud, but stays and runs on your computer. Where your files are stored as well.
For a beginner, you may be better off getting photoshop Elements as it hold your hand a bit to help you. Where as photoshop CC does have a steep learning curve since yes it is for pro's as well as those that want to take the time to learn it.
Maybe you are looking for
-
Print directly to the printer from Oracle 9I
Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.
-
Hi. I have created a book in iPhoto'11, I am now trying to buy it. When I select 'buy' my order comes up, with just the cost no other details. If I select 'checkout' it does nothing. Help! Am I missing something? I'm in Australia.
-
Converting Word Templates from 2003 to 2013 Version
Hello. I work at a school environment and most of our secretaries had been running Office 2003. They have a lot of Word templates. Recently, as we have decided to upgrade Office to 2013, we have the problem of hundreds of old templates that need t
-
How do I re-direct all my songs' location?
Hi guys, Originally I placed all my songs at my F drive, F:\music. But my laptop encounters some problem few days ago, so I just recovered my C drive. After recovery, the system automatically changed the hard drive names that my F: drive becomes D: d
-
Friends, I am strugling with this issue. Need to reduce output decimals from 3 to 2 for field VBDKA-NTGEW. Appreciate if i can get some help or suggestion on this please. I tried this but no luck &VBDKA-NTGEW(.2)&. Thank you, Bobby