I want to post service tax gl (liability) in KZ document type
Dear all,
I want to post service tax gl (liability) in KZ document type .in my customization document aplitting is active.it has not allow to post liability gl against bank.I want to post entry
Vendor dr
bank charges dr
service tax dr
to bank
and amount should adjust aginst bill also .at that time exchange diff should hit
please tell me the solution
If the form is going to be used on an iPad, Numbers is the only game in town.
Numbers is available for Macs only (and iOS devices). Excel is available for PCs and Macs. If you are in a mixed environment of Windows PCs and Macs and you are using this document as an electronic form, Excel is probably the better choice. Otherwise you will need to export to Excel for the PC users then import from Excel to retrieve their data. The import/export process is not perfect. A file that has been exported then reimported will not be the same as the original file. I would assume social services agencies are almost entirely PC-based.
If the form is to be printed or turned into a PDF for distribution and use by the social services agencies, either Excel or Numbers would do the job but right now Excel might be the better choice. I would have recommended Numbers '09 but I cannot recommend Numbers 3 for anything thsat requires printing until they give us the layout and printing functionality we used to have (editing in Print View, ability to set margins, etc).
If everything else in your department/operation/agency is Windows PC and Microsoft Office based, you would be better off sticking with the standard.
I hope that helps.
Similar Messages
-
Want to assign same no. ranges to different sales document types
Following is the requirement from SAP
Brief:
We are three wheeled auto rickshaw manufacturer and also sale the spare parts of auto rickshaw.
We are exporter of our both product also;
Currently we are using inhouse developed software to record sales transactions.
We have obtained permission from excise department to use more than 1 Invoice book.
The pattern of use is explained for your reference
Particulars Number range Remarks
1 Domestic Sales of Vehicles 1-99999 -
2 Domestic Sales of Spare Parts AAS 1- AAS 99999 T = Tax Invoice & R= Retail Invoice is to be prefixed to the invoice as the case may be
3 Export Sales of Vehicles EXP 1 - EXP 9999 -
4 Export sales of Spare parts EXP AAS 1- EXP AAS 9999 -
Issue:. can we carry above no. ranges in SAP as above no. ranges already approved by excise authority
Is it possible to carry the same pattern in SAP as well as we have all the logical and legal permission to use such invoice books?Hi ,
We maintain two different type of number ranges in sap
1. Internal number range - this is numeric in nature and is system generated
2. External number range - This is alphanumeric and the user has to manually enter the text. This number range is maintained in
data base table e.g. VBAK ,VBAP ,LIPS , VBKD.
You have to maintain external number range and the field in which u are passing the excise number would be manually entered.
Which document type a u creating ? for sales order vov8 ---> and use copy control.
There is one problem with external number range when e.g. if this field is used as reference for billing or delivery and the user had forgotten to enter the number . Then it will create problems in abap generated reports as select query would fail.
Thanks,
Rajat Kumar Sharma -
How to find out the table for Posting Key and A/R & A/P Document types
hi folks,
can you let me know which TABLE is used to Posting key and also which TABLE is used for Account Receivables and Account Payables.
Thank you in advance.To find the table of posting key, select any posting key at OB41, then press F1, then click on hammer icon the table used will be displayed. For Posting Key TBSL is the table used.
Posting Key TBSL
Customer Master (General) KNA1
Customer Master (Company Code) KNB1
Vendor Master (General) LFA1
Vendor Master (Company Code) LFB1
Satish
(please close the thred if u satisfiy with the answer) -
Hi all,
we have a jobwork invoice which include no tax but now we need service tax on total basic value.
please help me to add service tax 12% , edu cess on s.t. 2% and HS edu cess 1% on service tax
i m new so pls suggest how to add in invoice
Thaks to all.
DevendraHI Devendra,
if you wants to add service tax you must know the condition type.
for service tax 12% condition type is "JSVD"
edu cess on s.t. 2% condition type is "JSE3"
and HS edu cess 1% condition type is "JSE1"
using the above condition type you got the data from BSET table.
Regards,
Mukesh -
Calculation of CST on (Base Value+Service Tax )
Hi Gurus,
We are using tax procedure as TAXINN. Here our client want tax code for service and CST i.e. (Service Tax 10.3 + CST 5%.For this I have done the required configuration in FTXP but still there is a problem regarding calculation of CST.Client wants to calculate CST 5 % on (Base + Service Tax Amount).
Base Price 500
Service Tax (10.3 %) 51.5
Total 551.5
Cst (5%) 27.57
Total Price with Taxes 579.075
As of now what I have seen in system its calculate CST on base price not on total of (Base + Service Tax) on the basis of condition type JVCS.I have following queries on the same:
1.Whether the requirement of client is correct means as per law
2.And if it is correct than how can we configure in SAP in tax procedure
Kindly advice.
Regards,
Abhinav SharmaHI,
There is no way you can have this done if you are going to book transaction directly in FI based on tax code...this can be done if you are going to post transaction through SD or MM then you can attach routine to calculation procedure if MM and pricing procedure if SD..
Regards,
Chintan Joshi -
Service tax base amount for calculation : to be changed
Hi
i have and PO order with basic price say for 100 /- on which it is calcuating service tax 12% , e-cess 2% hcess--1 .This is coming thru tax code from the tax procedure and these taxes service/ecess /Hecess is to be posted to sepearte G/L account.This is working fine.
Now my requirement is that i want to calculate service tax on some % of the base price say 70 % of the base price. The % will always be changing .i want to calculate service tax on the 70/- not on 100.
i want that system should post this 100 /- to cost of service but the tax should be on whatever percentage i make .Here this is 12.36 % on 70 not on 100 at the time of invoice posting.
please guide me
regardsHello Sunny,
discount on services taxes is not in scope of standard SAP CIN.
I just faced same problem with one of our client, I have interacted with SAP and they give me this reply. They are working on this solution
However for 1 qty it is working. for that you do following
create condition called ZSER for example (copy condition from discount condition)
this is used for change calculated call in purchase order.
activate taxes at service level.(thru SPRO--- IMP step)
also check pricing procedure means seq in OMQ3 to have correct calculation
It will only work for one quantity, if qty in po is more than one then it will not work.in bill passing it will calculate tax for all the quantity.
This must be a transportation bill.
Reward points if useful
Regards
Kedar Kulkarni
Message was edited by:
KEDAR KULKARNI -
Service tax condition types in Pricing Procedure in SD(Taxinn)
I need one more advice on Service tax.
I am configuring order type for services.In that in pricing I have to add the service tax conditions type for service tax & cess on that.We do not have any standard condition type in our pricing procedure for services.
Is there any standard SAP doc. to configure service tax condition types in pricing procedure or I have to copy from JLST & JLSR(surcharge).What about the account keys I will used for these condition types.
If you have any doc. related to this issue please send it to me....or suggest me what to do.
Please remeber I am using TaxINN tax procedure.
Please help me
Thanks & Regards
Sunil GargPROCEDURE: Initial Steps
Create two new Tax conditions: JSE4, JES4. Steps for creation of Tax Condition is illustrated below
Create new condition types
SAP Standard IMG -> Financial Accounting -> Financial Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Check Calculation Procedure. (Transaction OBYZ)
Select Define Condition Types
Select Condition Type JIN1 and Click on Copy as (F6) and give the Condition type as JSE4 and the Name as Service Tax.
Select Condition Type JIN5 and Click on Copy as (F6) and give the Condition type as JES4 and the Name as ECS on Service Tax.
Outcome: The two tax conditions, one for Service Tax and the second for Education Cess on Service Tax have now been created.
1. Create a new tax posting key VS9 and VS0.
The path for this is:
SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Basic Settings  Check and Change Settings for Tax Processing
Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS9 and Name as India Service Tax.
Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS0 and Name as ECS on Service Tax.
Note: If there are multiple service tax registration numbers, you need to have separate account posting to different GL accounts based on service registration number. This can be done provided a separate tax code is maintained for each service registration number.
To achieve this you need to define a set of 2 separate G/L accounts for service tax and Education CESS on service tax respectively, for every service registration number.
In such a case, please activate multiple accounts posting per tax code as follows:
Defining the GL accounts for the Service tax and ECS on Service Tax:
SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Posting -> Define Tax accounts
Go to Details of the Transaction VS9 (Service Tax GL account) and enter the Chart of accounts
Select the Tax Code Check Box if you want to have Tax Code Specific GL accounts or Blank when the common GL accounts
Regards,
Rajesh Banka
Reward points if helpful. -
Changing the base price for service tax calculation
Hi
i have and PO order with basic price say for 100 /- on which it is calcuating service tax 12% , e-cess 2% hcess--1 .This is coming thru tax code from the tax procedure and these taxes service/ecess /Hecess is to be posted to sepearte G/L account.This is working fine.
Now my requirement is that i want to calculate service tax on some % of the base price say 70 % of the base price. The % will always be changing .i want to calculate service tax on the 70/- not on 100.
i want that system should post this 100 /- to cost of service but the tax should be on whatever percentage i make .Here this is 12.36 % on 70 not on 100 at the time of invoice posting.
please guide me
regardsHi,
For this you have to maintain the all your charges in your pricing procedure along with each charge you have to maintain 3 condition types for service and chesses.
Ex:
step counter cond.type des. from to
1 1 P000 Gross Price
1 2 P001 Gross Price
25 0 JM00 Water front royalty 1
26 0 ser1 service 25
27 0 edu1 educationcess 26
28 0 edu2 se.edu.cess ; 26
29 0 jm01 Port Dues 1
30 0 ser1 service 29
31 0 edu1 educationcess 30
32 0 edu2 se.edu.cess 30
like this you have to built your pricing procedure in a m/08. after that for you want the service tax automatically so for that you have to put the accesses sequence in you service condition types (ser, edu1,edu2).in m/06.
After that you have to maintain info record for that material and import vendor. in me11 in that in condition tab you have to maintain percentage for ser, edu1, edu2 . the system will calculate the service charges automatically.
Thanking you, -
Hi,
My client is posting some vendor invoices through FB60. When they are posting in FB60, TDS is getting calculated automatically for that particular vendor. Entry is showing like this
Itm PK Account Account short text Assignment Tx Amount
1 31 201009 Intertek Testing Ser 887.00-
2 40 170113 Exp Freight unplannd 1,000.00
3 50 111106 TDS Payable - Prof 113.00-
Now the problem is service tax. Service tax is 12.36%. Invoice amount 1000 include service tax also. Now they are posting service tax manually. The entry should be like this
Itm PK Account Account short text Assignment Tx Amount
1 31 201009 Intertek Testing Ser 887.00-
2 40 170113 Exp Freight unplannd 889.00
3 40 104501 Service Tax Credit 111.00
4 50 111106 TDS Payable - Prof 113.00-
Now the service tax Rs 111/- Should be calculated automatically by the system. what changes I have to made. please suggest me. Advance thanks.
JayDear amit,
My issue is service tax should be calculated on expense account and that amount should be debited along with expense account. Vendor account and TDS accounts should be credited. If I assign the new tax type to vendor master this amont also will be credited. I want the entry should be like this
Itm PK Account Account short text Assignment Tx Amount
1 31 201009 Intertek Testing Ser 887.00-
2 40 170113 Exp Freight unplannd 889.00
3 40 104501 Service Tax Credit 111.00
4 50 111106 TDS Payable - Prof 113.00-
If it is possible in way u suggested, plz explain briefly how to proceed.
Regards
Jay -
Hi
Guru's
I want to transfer Service Tax amount from "Service Tax on hold" Account to "Service Tax Receivable Account", after payment made to Vendor.
Do we need to run any other transaction code. Please advise me
Regards,
Arun KumarHi Prashanth..
When you do the invoice, you need to deduct the service tax and post it to the on hold account.
When you do the payment, then you need to pass a journal entry between the service tax on hold account and service tax main account.
Hope its clear for you.
Cheers!
Good Luck..
Lucid-Mind... -
Service Tax and Business place configuration..
HI Experts,
I have one confusion, please clear and suggest the below issue..
My client having 3 plants, he wants to collect service tax in diferent GL accounts for plant wise with same tax code.
I think it is possible through business place concept? Please clear it is possible or not?
I have defined business place and assign business place to plant and compay code...what is the next step to follw please breif me about the scenario...
Please suggest.
ChanduThank you Vivek....
I am following the below way...
I have created Business place and assigned to company code and plant...
I have created one tax code and not assigned any GL accounts in OB40 AND i have assign GL accounts IN SM30...J_1IT030K_V IN THE combination of Account key, business place and GL.....but i am not getting any GL acounts in OB40 and FTXP in both cases my GL field is null....while posting the transaction system giving the below erro
Transaction key VS7 chart of accts ASHI not defined in table T030K
I have maintained the combination in SM30..it is not sufficeinet or any activation required....Please guide me...
Thanks
Chandu -
Service Tax Calculation for Condition Types
Dear Experts,
In an Import Purchase Order for Coal, along with the Basic Price of the Coal, the following Conditions are also entered, in the Condition Types maintained in the Import Pricing Schema
- Water front royalty
- Port Dues
- Berth Hire Charges
- Port terminal charges
- Surveyor charges
Each of these conditions may have a separate Vendor, hence the Purchase Order creator will select each condition and assign the required vendor.
Each of these conditions is subject to Service Tax, Educational Cess and Higher Secondary Educational Cess, the User want that separate service tax calculation be made available in the pricing schema for these individual conditions and the relevant vendor be assigned to these condition. the service tax on individual conditions be paid to the relevant vendor along with the basic value for the condition.
Separate Condition Types (15 nos.) for each of the above conditions for Service Tax, Educational Cess and Higher Secondary Educational Cess can be prepared and added in the pricing schema, the user will have to enter the percentages in the relevant conditions.
The user wants that the Service Tax be automatically calculated for these conditions, instead of manually entering the same. Please guide how can this be achieved.
Thanks in advance.
AJHi,
For this you have to maintain the all your charges in your pricing procedure along with each charge you have to maintain 3 condition types for service and chesses.
Ex:
step counter cond.type des. from to
1 1 P000 Gross Price
1 2 P001 Gross Price
25 0 JM00 Water front royalty 1
26 0 ser1 service 25
27 0 edu1 educationcess 26
28 0 edu2 se.edu.cess ; 26
29 0 jm01 Port Dues 1
30 0 ser1 service 29
31 0 edu1 educationcess 30
32 0 edu2 se.edu.cess 30
like this you have to built your pricing procedure in a m/08. after that for you want the service tax automatically so for that you have to put the accesses sequence in you service condition types (ser, edu1,edu2).in m/06.
After that you have to maintain info record for that material and import vendor. in me11 in that in condition tab you have to maintain percentage for ser, edu1, edu2 . the system will calculate the service charges automatically.
Thanking you, -
Service tax calculation on payments
hai sap gurus.
my client has nine company codes and in every company they want to calculate service tax at the time of receiving payment from customer.i think this is not possible with f-28.can any one suggest me the solution for this trouble some problem.
thanks in advance.
R A J I N IService Tax is NOT Income Tax. So, you would not calculate Service Tax downpayments. Service tax is applicable only on Service rendered and does not concern whether it is paid. (Though, if you want to avail Service tax credit, you'll have to pay for the service, which is mandatory as per the Indian Tax laws).
So, Service Tax is only calculated from the Invoice. As long as no invoice is raised, no Service tax is payable / deductable.
The above is true for India and most countries. You have not mentioned which country are you working with. If such a scenario is appropriate in your country, you'll have to consult your country version documentation.
Ravi. -
Hello
I want to calculate service tax 10.1%..........what are the settings required for it......
regradsHi,
You can create the tax code in FTXP and maintain the percentage of tax against the acct key STX, SEC, SSE.
The current existing service tax rate is 10.3% (inclusive of Cess portions).
Since in your case, the tax rate to be maintained is 10.1%, is it something proportionate to the reduction of the base amount. In that case, you can maintain the tax percentages proportionately in the mentioned accounting keys
Regards
Hari -
Hi
As per service tax rules, service tax needs to be paid to government only when th amount is received from customer. So at the time of booking invoice, credit must go to service tax interim account and not service tax payable account. Similarly in case of advance, we need to pay service tax once the amount is received even though invoice is not billed to customer.
Let me know how to handle this.Dear
As per my understanding, when an invoice is created the entry is
Customer A/c Dr xxxx
Income A/c Cr xxxx
Service Tax A/c Cr xxxx
Now you want to assign Service Tax Clearing Account in the above entry. Upto that stage it is OK. Then when you receive Service Tax amount from Customer naturally you give credit to Customer Account since billing is already done for service tax and here you cannot give credit to clearing account. Then by assigning/giving above clearing account does not serve our purpose.
In my view it is better not to debit Customer at all at the first instance with service tax amount.
So when you receive service tax amount, directly you can give credit to Service Tax payable account from where you can pay to the authorities.
Regards
Maybe you are looking for
-
Where did the Secure Site Icon go ?
I know the status bar was removed and an and on bar replaces it but Where did the Secure Site Icon go ? Will not use FF without it ! I cant find anything about it. ( FF 40b7 ) How do I get it back ? Not so little things like this will hurt FF. And YE
-
Update control of movement type is incorrect
while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted
-
I have to run a jmf application like daemon in a Linux machine widthout X11 installed but I obtain this error: javax.media.NoPlayerException: Error instantiating class: com.sun.media.content.unknown.Handler : java.awt.HeadlessExceptionWhat can I do t
-
Eliminating white space around jpg
So I opened a jpg file, and I'd like to eliminate an outer perimeter of white, actually replace it with another color.. I see there's a little lock beside it in the layers.. Thx
-
I'm getting frequent crashes on my iPad 1running 5.0.1--iTunes and safari.