I want to produce my DVD selection page ???

I want to master my DVD's inside FCP but unable to. I want a selection page so that my clients can go to whichever chapter they choose. This should be done by selecting the photo related to it.
I have been advised to use a product like NERO but i feel very disappointed after buying the laptop and FCP and it docent complete the job.
Can someone help please.

No idea about DVD Creator.
iDVD was not a download; it was part of the iLife suite – since discontinued – and shipped on installation disks. It's a very good authoring program if you don't require Blu Ray. Some online retailers still offer it, such as here.
Russ

Similar Messages

I want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd?

i want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd? Can i use idvd?

The only Programms I worked with are DVD Studio Pro and iDVD. You can burn a Video-DVD with Toast but there is no real option to design your Menu. Just a few themes as far as I discovered.
Do you have a Blue Ray Device to burn* the HD-DVD? Are the Bride and Groom able to watch the Blue Ray?
* which is only possible with DVD Studio Pro and not iMovie as far as I know.
This might help
For better quality I would go the Compressor & DVD Studio Pro workflow I just learned.
Export the Movie as is from Final Cut Pro and then use Compressor to encode the File.
Consider delivering the Movie in a different way like a private video on vimeo, a Website or on an SD card which is not really romantic...

I want to be able to select only the pages I want to print ei. 2-5 vs 1-8 but I can';t figure out how to edit the final #

I want to economize on ink so I want to be able to select, for printing,only those pages that are important to me.. For example instead of printing pages 1 thru 8 , I may want to eliminate pictures and/or comments at the end of an article. I can adjust the beginning # but not the final one. Any help would be appreciated.

Bonjour has nothing to do with this.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup to get rid of that garbage which removed all built-in secuirty included with iOS on your iPhone.
If your iPhone is not recognized by iTunes, check this link.
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591?viewlocale=en_US

I want to create a DVD of JPEG images

I want to create a DVD of JPEG images from multiple albums in my catalog. I am using Windows 7 and Premier Elements 11. I have not been able to insert more than one menu marker in my "video." Any suggestions?

BobHabig32453
I seldom ran across a question to which I could offer an abridged answer. Sorry about that.
There is an assortment of miscellaneous information to guide your path as to what you can and cannot do with regard to a Premiere Elements DVD Template that represent the Main Menu and Scene Menu set. The number and kind of menu markers that you place on the Timeline are linked to the Menus - Main Menu or Scene Menu depending whether you have placed a Main Menu Marker or Scene Marker on the Timeline. Again, do not put a Stop Marker at the end of the last file on the Timeline.
Each movie (in your case album) cannot have its own Scene Selection page or pages. All the Timeline scene markers representation found on the Scene Selection page or pages is there in the order that each was placed on the Timeline. There is a limited amount of space under each scene thumbnail, and you do want to avoid button overlap.
Each main menu and scene menu that came with the program is designed with a certain number of buttons per page (Main Menu page or Scene Selection page). When the number of Timeline markers exceed the number of designed in buttons per page, the buttons spill over to additional pages (each a copy of the first).
Most Main Menu pages come with Play All button, Scene Selection button, and some with Main Menu or Bonus Movie button. Most are text type buttons, fewer are thumbnail type buttons for this Main Menu. You see the thumbnail type buttons in the Scene Selection Page, and typically the maximum number there is about 6, may goes to 8 in some rare instances.
Once you introduce Stop Markers to separate the multi movie type setup, your Play Movie (Play All) button on the Main Menu is meaningless. And, the reminder, two menu markers cannot occupy the same spot on the Timeline.
Important to the project are the pixel dimensions of the photos and the duration of the content. If you are heading for DVD-VIDEO on DVD disc Standard or Widescreen, the pixel dimensions should not exceed 1000 x 750 pixel (landscape) – classical recommendation here and elsewhere. Greater than that typically does not accomplish much other than stressing out the program. The level of computer resources can often dictate whether the program stress will set in sooner or later. That 1000 x 750 which is not written in stone is close enough to the export standard and will leave some room for pans and zooms if needed. Look to the Premiere Elements burn dialog prior to burn to and look at the Quality Section’s values for Space Required and Bitrate. The DVD-R 4.7 GB/120 min is in reality 4.3 GB and the “for best results” classical recommendation is not to exceed 90 minutes for this type of disc. There is also the DVD double layer disc 8.5 GB (really 7.3 GB)/240 minutes to think about.
How does this all impact what you outlined for what you would like to do? Many thoughts on that, but for starters:
Are your photos sized properly for a NTSC or PAL DV Standard or Widescreen project? Are you heading for NTSC or PAL DVD-VIDEO Standard or Widescreen? Are you considering Blu-ray disc format on Blu-ray disc in this regard for your Premiere Elements project.
How many albums do you envision in each of your planned DVD discs. I suspect the number is going to be in excess of 6 or 8. Here some of the considerations might be:
…switch the names of the .psd files for the main and scene menu (just the names) so that you can take advantage of the larger number of scene buttons on an already designed Scene Menu. The Timeline markers are Main Menu Markers in this instance, no Scene Markers. Result: One page Main Menu with thumbnails there displaying the first photo in each album.
…editing the .psd file for a DVD Template to add more buttons to the design. That requires strict adherence to requirements for doing that, including editing with Photoshop CS and later or a version of Photoshop Elements that will open the Layer Groups of the .psd so that you can get at the Folders and Files that you need to modify/duplicate and the like.
If you wanted text buttons instead of thumbnail buttons, you could look at a DVD Menu such as Faux Widescreen Main Menu Page and customizing that.
Not sure if long trip descriptions (text) would be feasible. I can offer a how to for creating a page for information before the main menu (like those FBI notices) if you thought that might be appropriate for any overview trip descriptions per disk. Lots of details, Lots of choices, but often with limitations and special considerations if you are restricted to what comes as is with the program.
Please review the above and then we could fine tune with more specifics.
Thanks.
ATR

Sending email for selected pages of a script output

Hi all,
i want to know how to send email only the selected pages of an script output.Example if the script produce 10 pages i want to send 4th and 5th page to one customer and 6th ,7th page to another customer like that. because this is an customer statement of account which is confidetial. i refer so many sites but useless. i hope here my problem can solve.
rgds,
Ashok

Hi ashok,
While enter the print parameters enter the page number what ever u want.
Reply for queries,
Regards,
Kumar.

How do I change the text color of footers on select pages? (InDesign CS6)

Good afternoon,
Months ago, I worked with a graphic designer to put together a 100-page workbook for my training company. He turned all of the files over to me and I'd like to make a small change before we print another run for a new client. Specifically, I'm having trouble changing the text color on select pages. Since a picture says 1,000 words, let me give you an example:
As you can see, the copyright information on the right side of the page is difficult to read here when placed over the photo (you may have to look closely, but it's along the guy's sleeve). What I'd love to do is change that part of the footer (not the left, page number side) to white text. This would make it quite a bit easier to read. There's a number of other pages in the book that I want to make this change to. I'm not sure why I never noticed it or mentioned it to the designer. I suppose I've become more discerning since then.
Let me tell you what I've tried to do:
I learned how to override master pages by CTRL+SHIFT clicking on the footer. However, this has not worked for me. It allows me to change the page number part, but not the copyright side. Additionally, sometimes when I override the master the formatting of the footer goes goofy. For instance, the left side and right side come together and end up in the middle of the page I'm working on.
I'm looking for a quick way to go through and make the footers easier to read on pages where they are backed by a photo. Hoping you can help me. Please let me know if you need any other information.
Best,
Taylor

I think you should have left it as it was. It seems like what you had was single pages flowing as spreads within InDesign. Like below. That is the correct way, and when you changed it to all single, it did create your footer problems.
Will you be sending the file as a PDF to your online printer? If so, then leaving the InDesign file set as below is fine. The PDF output will separate the pages.
All you have to do is make sure that Pages, not Spreads, is chosen when you output the PDF

How to: print selected pages, same pages, odd pages on a book?

hi,
about book:
how can I print only pages that I want to?
Like selected pages, odds pages or only that I want?
How can I print front-back sheet?
Thank you

[Jongware] wrote:
I don't think it's possible to set the page range of a Book.printPreferences
Theoretically it ought to be possible. Can't test for myself now; what does happen when you set the pageRange to overlapping sub-files?
I've just tried it with CS3. It might have been implemented in later versions.
In the print Book dialogue the page range field is disabled. You cannot enter anything there.
If you try to do it with a script it says that printPreferences is read only.

How can I print only Selected pages from a Multipage document?

HP Envy 114 e-All-in One Printer
How can I print only pages 2 and 4 from a 10 page document using my Envy 114 Printer?
This question was solved.
View Solution.

Hi,
Where do you print from ? Under Word or PDF you can select page(s) you want to print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printing current selected pages

i was wondering - it there a way to print the currently selected pages in indesign //like we can do in acrobat//? its not very sexy to manually type in all the pages you want to output and writing a pdf file to select and print the pages in acrobat cant be the only way //having a 100+ pages and printing like 15 of them//
i hope you can help me, thank you in advance
denis
ps: im using indesign cs5

Might be scriptable, but you see your built-in choices there in the dialog.

HP Laserjet 1320 will not print ?selected pages

I have the HP Laserjet 1320 and when in a Word document and I want to print a selected page (i.e. page 2 of 4 only), under Pages on the Print Menu, I enter 2 or 2-2 and select print and it will not print! I can scroll down to place the pointer on page and tell it to print "current page" and it will print - why will it not print when I enter the page number I want to print.
Thanks
gumboman

My printer would not print multiple copies. It would only print one page at a time.

I just bought a new macair laptop and it doens't have idvd and I want to make a DVD slideshow with music. I have an external CD drive. Is there an applicaation that apple has to do this? IF I buy a used mac, which ones have idvd?

I have a new macair laptop and it does not have idvd. It has a flashdirve instead, so no internal CD drive though I bought an external one. I'm wanted to make a DVD slide show with music and I was told I can't do that in order to play it on a dvd player. Does Mac have an appication to buy that can do the same thing? I thought I saw one for $39.95 but not sure if it will do this. The apple store did not know for sure. Also, if I bought a used mac laptop, which ones will have the idvd installed on it?
Thanks,
Phyllis

It is now apparent that iWeb, and iDVD, will no longer be supported by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
Other users have complained to Apple via Apple via http://www.apple.com/feedback/idvd.html and/or http://www.apple.com/contact/ and have received a boxed copy of iLIfe 11. Give it a try. In the meantime the following maybe of interest:
iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
All of these issues can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
Apple has announced that iLife is now an unsupported product and those iApps will only be available thru the App Store from now on. However, the boxed iLife 11 at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought. Personally, if I already didn't have a copy I would purchase one to have it for reinstallation purposes if ever needed.
OT

How do i remove an Update notification? I do not want to update to the latest iOS (Asian languages) which is useless to me and I don't want to waste space on my iPad. I want to be able to "Select All" instead of doing each update individually.

That's quite a title I created! Sorry, I've never submitted a question before! ☺ I do not want to update to the latest iOS (Asian language stuff) which is useless to me and I don't want to waste space on my iPhone 4S and iPad 5. I want to be able to "Select All" updates instead of doing each update individually. It's a real pain in the you-know-what. Does anyone know how to I remove this notification (and any other updates I'm not interested in) from the Updates page? Thanks so much everyone!

Thanks so much for your time! I wish you had a more positive answer, but c'est la vie! I hate the fact that I cannot control my apps and feel like a hostage of the developer(s). I've read other forums and some responses were "then delete the app!" Lame answer! So thank you so much for your respectful and insightful reply! Cheers.

How to create a pdf file from selected pages of a pdf file?

I basically have an online college catalog that has a lot of information that I need to print out. I know that I can select pages from the main pdf file to print out, but I want to have a separate pdf file that I can look at any time without doing much scrolling.

Hi tanasiluv,
Please check the video: http://tv.adobe.com/watch/learn-acrobat-xi/extracting-pages/
to know how to extract pages from a pdf and create new pdf using Adobe Acrobat.
Regards,
Rave

Printing selected page as a pdf in adobe reader

Hi,
I have Adobe Reader for the Mac. I'm dealing with pdf documents that are hundreds of pages. If I wanted to save a single page (or several pages), it seems I have to go through an extra step:
1) print
2) then select printer
3) then get warning window telling me to go to applications dialogue box
4) click ok, go to box
5) select page range in applications printer box.
that's a lot of steps. Preview does this in one step (but has other problems). Is there a way of selecting pages and going directly to save as pdf. I know there's no extract page feature like there is in Acrobat.
thanks for any help,
jeff

Not in the free Reader, no.

I want to burn a DVD and keep the pictures in the files

I am using iPhoto 8. I have 46 albums that I created for one vacation. I have organized all of the pictures from 5 cameras and want to burn a DVD keeping the pictures in those albums so others can create a slideshow from them. When I burned a DVD the files did not show up, so all of the work was for nothing. How can I burn the DVD and keep the files intact so other people do not need to do the same work that I have already completed?

As Terence mentioned for those with Macs and iPhoto select the albums you've created and use the Share ➙ Burn menu option. This will create a mini library on the disk that others can view in iPhoto and run slideshows from the photos in the album or copy those albums into their library for more control.
Click to view full size
OT

I want to produce my DVD selection page ???

Similar Messages

Maybe you are looking for