I want to send 10 bit ADC from PIC via serial communicaton. i send it separetly 8 bit first then the other 2 bit. how to program in labview to capture those two packet then combine it togother

i want to send 10 bit ADC from PIC mCu via serial communicaton.
 i send it separetly 8 bit first then the other 2 bit (2 bit --> with zero at 6 bit from LSB).
how to program in labview to capture those two packet and then combine it together
so i have 10 bit in lab view
thank you

Close, but now quite. You need to specify to the VISA Read how many bytes to read, not how many bits. Thus, the input would be 2, not 16. It's also not clear why you're trying to use the "String to Byte Array". The Type Cast will give you a number based on what data type you wired. You're basically telling it how to interpret the string. In this case we're telling it to interpret the string a 16-bit value, so we'll get a 16-bit integer. I know you said you wanted a 10-bit, but you can't have that. You'll get a 16-bit with 6 bits set to zero. Note: I did not completely understand what you said so we may need to change this slightly, but we want to get the communication and reading collection working first.
Also, since you seem to be setting this in a loop you probably want to monitor this or to collect the data. For that you need a shift register. See attached for a modified version of your attempt. You need to set the datatype to I16 or U16 based on whether the value you get from the PIC is signed or unsigned.
Message Edited by smercurio_fc on 05-01-2007 02:28 PM
Attachments:
Read PIC.vi ‏21 KB
Read PIC.png ‏7 KB

Similar Messages

  • We have 2 iphone 5s sharing the same apple ID.  When browsing Safari on one phone it automatically sends a link to that page to the other phone.  How do we turn this off please?

    We have 2 iphone 5s sharing the same apple ID.  When browsing Safari on one phone it automatically sends a link to that page to the other phone.  How do we turn this off please?

    @apup80
    It sounds that you are running the same iCloud account with two phones.  I recommend you to create a different iCloud account and you should be all set.
    Creating an iCloud account: Frequently Asked Questions - Apple Support
    iCloud: Remove your device from Find My iPhone

  • I have 2 iphones and when i send a text message it shows up on the other iphone. How do i change this

    I have 2 iphones and when i send a text message, it shows on the other iphone. How do i change this?

    Go to Settings>Messages>Send & Receive and do one of the following:
    Either uncheck the email address shown under "You can be reached by iMessage at" on both of your phones; or
    If you want to continue to receive iMessages at this email address on one of your devices, on the other phone tap the Apple ID at the top, sign out, then sign back in using a different Apple ID (so both phones are using a different Apple ID for iMessage).  Note: you can continue to share an Apple ID for purchasing from the iTunes and App stores.  It does not need to be the same as the ID you are using for iMessage, FaceTime and other services.

  • When turning pages in catalog in safari messages comes up "Are you sure you want to send a form again? it then asks if I want to cancel or resend form? what is this and why does it pop up?

    When turning pages in catalog in safari, message comes up "Are you sure  you want to send a form again? It then asks if I want to cancel or resend form? What is this and what am I doing wrong? I'm obviously new to mac.

    You can turn that off if you want ..
    From your Safari menu bar top of your screen click Safari > Preferences  then select the Security tab.
    Deselect:   Ask before sendinga a non-secure form from a secure a secure website

  • HT1277 I have OS X 10.9.2 and have downloaded maverick. If I am sending an email message to one person, options for addresses  from my address book show up. However if I want to send it to more than one person, the address options for the others do not sh

    I have OS X 10.9.2. and have downloaded Maverick. If I am sending an email message to one person, options for addresses from my Address Book appear. However if I want to send it to more than one person, the potential addresses for the other persons do not show. Can you please help?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I have two phones that share an itunes acct and a notice came up this morning and I hit yes. Now I get a text everytime I send a text to the other phone. How do I turn that off?

    I have two phones that share an itunes acct and a notice came up this morning and I hit yes. Now I get a text everytime I send a text to the other phone. How do I turn that off?

    search google for "iphone remove picture from contact"

  • I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

    I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

    hello, I already Bridge CS6 installed but can not be accessed by the> parameters color edition menu. The message said that eereur lme Suite Color Management is not enabled. What should I do?
    De : gener7 <[email protected]<mailto:[email protected]>>
    Répondre à : "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date : mardi 9 septembre 2014 14:20
    À : jp <[email protected]<mailto:[email protected]>>
    Objet :  I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply
    Download and install Bridge CC, then in the Bridge Edit menu > Color Settings choose the color settings you want to synchronize your CC apps to.
    ATTENTION Le message contenu dans cet email ainsi que dans tout fichier attaché est destiné exclusivement aux personnes dont le nom figure ci-dessus. Il peut contenir des informations confidentielles ou protégées par le secret professionnel et dont la divulgation est strictement prohibée. Si vous avez reçu cet email par erreur, détruisez-en le contenu. Vous n'êtes pas autorisé, dans cette hypothèse, à copier, distribuer ou conserver ce message. Merci.
    WARNING This information in this mail and in any attachments is intended for the above-mentioned addressees only. It may contain privileged or confidential information the review, dissemination or disclosure of which is strictly prohibited. If you have received this email by error, please destroy it. In this case, you are not authorised to disclose, copy, distribute, or retain this message or any part of it. Thank you.

  • My pc was stolen and now i want to transfer the music from the ipod touch to the new computer, but sync only allows the other way. How can i do that? I need to back up the music!

    my pc was stolen and now i want to transfer the music from the ipod touch to the new computer, but sync only allows the other way. How can i do that? I need to back up the music!

    If it is purchased music from itunes you can redownload it.
    Follow instructions at link below.
    http://support.apple.com/kb/HT2519

  • Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

    Need detail information, steps would be nicer,  to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

    Hi,
    Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
    Installing Exchange 2010 within your organization on new hardware.
    Configuring Exchange 2010 Client Access.
    Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
    Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
    Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
    Moving mailboxes from Exchange 2003 to Exchange 2010.
    Decommissioning your Exchange 2003 infrastructure.
    For more details, please refer to this following document.
    http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
    Best Regards.

  • I want to send FLEXCUBE logs on Splunk log management server. does anyone know how ?

    i want to send FLEXCUBE logs on Splunk log management server. does anyone know how ?

    On your Mac: Messages>Preferences>Accounts...adjust here.
    On your iPad: Settings>Messages>Send/Receive...adjust here.

  • Safari asks me if I want to send again a form, whenever I hit the previous page icon.

    Safari asks me if I want to send again a form, whenever I hit the previous page icon.
    How can I disable that?

    It happens with most sites.
    Alfonso

  • How do I adjust the page orientation in Pages?  I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape.  Is this possible?  I can only get it to be one or the other but not both.

    I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape.  Is this possible?  I can only get it to be one or the other but not both.

    The work around is to do two documents, one in portrait format and one in landscape format. When finished export to Pdf. open in Preview by select both files and use Cmd + O or doubleclick. You can now in Previews thumbnail column the pages from one document into the other and then save.
    If you have created only one with i.e. all pages in portrait format but with the content for the landscape pages rotated on the pages, you can rotate the pages in Preview. Two ways to get the same result.

  • I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

    I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

    Hi...
    Mac OS X keyboard shortcuts
    Control-F4
    Move focus to the active (or next) window
    Shift-Control-F4
    Move focus to the previously active window
    By the way...  since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
    Click Help then click Help Center
    As an example type in    keyboard shortcuts
    You can use the Help menu for almost any application on your Mac.
    Apple - Find Out How - Mac Basics
    For held switching from PC to Mac >  Apple - Support - Switch 101

  • TS4006 I want to set up "find my ipad" on my sister's ipad, so we can find each other's iPads. However, this seems to require differing individual cloud email addresses, so one ipad wouldn't recognise the other one. How do I get round this?

    I want to set up "find my ipad" on my sister's ipad, so we can find each other's iPads. However, this seems to require differing individual cloud email addresses, so one ipad wouldn't recognise the other one. How do I get round this?

    Many thanks for the quick response.
    I'm fine with using the same ID for iCloud, so I'll give that a try.
    You mention that a lost ipad can be found from any computer. As a relative computer novice, I didn't know this. How would I go about carrying out such a search?
    I don't think I'd use the find friends app. My concern is to find a lost or stolen ipad.
    Thanks

  • My computer keeps defaulting from a GB format to US format keyboard with a US flag in the top bar. How do I get it to go back to a GB flag and stay with a GB flag?

    My computer keeps defaulting from a GB format to US format keyboard with a US flag in the top bar. How do I get it to go back to a GB flag and stay with a GB flag?
    This only started 2 days ago.
    I have seen much on line as this seems to be a common problem, however none of the suggestions posted seem to work.

    Thanks Drew,
    On clicking the US flag I had previously then unchecked the US box. It has rechecked itself, and I have unchecked it again. The GB English remains checked.
    The flag icon has now gone completely from the top bar (just replaced with character and keyboard viewer) -but that's fine. That's different to previous attempts to fix the issue.
    Hopefully now I will remain able to type a £ sign on the keyboard rather than get the criss-cross symbol. It may well default back in about an hour (which is what has been happening since this started 2 days ago). If it does I'll come back on here. Many thanks in the mean time for your help.

Maybe you are looking for