I want to use the screen on my touchsmart as a monitor on a new PC.

 I just bought a new gaming tower and i would like to know if i could hook it up to my touchsmart as a monitor.

Karo44, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.  Actually, I need the model of both computers.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • HT1752 I have an IMac OSX and a 2013 MacBook air and I want to use the screen on my IMac.  I have connected the cable but I can't get the IMac screen to connect to my MacBook

    I have an IMac OSX and a 2013 MacBook Air and I want to use the screen on my IMac.  I have purchased the cable and connected, but the IMac will not connect to my MacBook.  I have tried the Command/F2 but it does not work.  Any help would be appreciated.

    Target Display Mode 2009 & 2010 iMacs
    Target Display Mode 2011 & Later iMacs
    iMac- How to use your iMac as a Target Display Mode display
    Target Display Mode- Frequently Asked Questions (FAQ)

  • Want to use touch screen in photoshop. Heard this is supported for new surface 3, is there any way to use it on any touchscreen laptop running windows 8.1?

    Hi, I have the lenvo yoga 2 touch. I run windows 8.1, want to use touh facilities in photoshop. Can I do this yet? Heard surface 3 can due to special deal with adobe, will this be availble to all cc users or will there be extra charge etc. Any info appreciated. Sorry for bad english, late nights with little one!

    Touch is available for all Windows 8 devices that support direct (on-screen) touch. Note: touch is only enabled of you are using open-gl, so the restriction is that your computer must be able to support open-gl/hardware accelerated drawing. You can download the trial version of Photoshop and try it out.

  • I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further.

    I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further

    I just updated my original iPad 32 GB WiFi to iOS 5.1 about fifteen minutes ago.  But I did it with the system restore feature in iTunes.  So it wiped out everything on my iPad.  But it did work.  Then I restored an earlier backup and all went fine.  Maybe you could try backing up your iPad and then using Restore to get it back to factory settings to see what happens. 

  • I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full scree

    I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full screen is there any way i can click on the attacment without going out of full screen

    I don't know why the change, but the pointer appears in the same way as it does on the main screen, not a pointer. There does not appear to be anyway to change it. You may want to submit a comment to the Features Requests: Acrobat Feature Requests. I also submitted this as a bug.
    As a clarification, your "adobe acrobat 11 reader writer" is not informative. There is Acrobat 11 and Reader 11. Writer is not a product as such. So you have referred to Acrobat in a contradictory manner. In the future, please just indicate Acrobat 11 or Adobe Acrobat 11.

  • How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

    I have a full screen and cannot see my bookmarks.
    How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

    View > Sidebar > Bookmarks (Ctrl+B)
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

  • I have Photoshop Elements 12.  When I open the organizer, click on a picture, then want to use the Editor, I get an error message.  If I click on the Editor from the Welcome screen, error message.  What happened to my Editor?

    I have Photoshop Elements 12.  When I open the organizer, click on a picture, then want to use the Editor, I get an error message.  If I click on the Editor from the Welcome screen, error message.  What happened to my Editor?

    I would suggest un-installing via the Windows control panel and then download again and re-install. Try an alternative link and validate with your 24 digit serial number - click here for PSE downloads

  • My friends's ipad dropped and the screen cracked and he wants to use the warranty. So does the warranties for apple cover those stuff.

    My friend's ipad dropped and the screen cracked and he wants to use the warrranty. So does the warranties for apple cover this

    AppleCare+ provides repair or replacement coverage, both parts and labor, from Apple-authorized technicians. Service coverage includes the following:
    Your iPad
    Battery1
    Time Capsule or AirPort device4
    Included USB cable and power adapter
    Coverage for up to two incidents of accidental damage from handling of your iPad, each subject to a $49 service fee1
    http://www.apple.com/support/products/ipad.html

  • I have gotten a giftcard for iTunes and I want to spend it but before I had a credit card giftcard and I spent it all and now I don't have a credit card and I just want to use thee iTunes one how do I delete the card on my iPhone

    I have gotten a giftcard for iTunes and I want to spend it but before I had a credit card giftcard and I spent it all and now I don't have a credit card and I just want to use thee iTunes one how do I delete the card on my iPhone

    Hello Clancbelle,
    It sounds like you have a credit card saved to your Apple ID payment information and you would like it to be removed from the account and set the payment method to None. You should be able to do this with the following article:
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    Changing your payment information using an iOS device
    Tap Settings on the Home screen.
    Tap iTunes & App Stores.
    Tap your Apple ID. (If you aren't signed in, enter your Apple ID and password and tap Sign In.)
    Tap View Apple ID.
    Enter your Apple ID password.
    In the Edit section, tap Payment Information.
    Update the information that you want to change.
    Tap the Done button when you're finished.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

    How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

    Hi littlemansa,
    If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    http://support.apple.com/en-us/HT4137
    Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results. 
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Logical database EQI (equipment)  .. I dont want to use the default selecti

    i am using Logical database EQI (equipment)  its realated to PM module.....
    i dont want to use the default selection screen.
    instead i want to process my own selection screen inputs..
    (ie..) i want to fetch the data using the GET event using my  own selection screen  inputs.
    my selection screen inputs is   equipmentnumber (equnr)
    and  the output list : 1.equnr      "equipment number
                                  2.shtxt       "Equipment Description
                                  3.tplnr        "Functional Location
                                  4.pltxt        "Functional Location Description
                                  5.qmnum    "Notification Number 
                                  6.qmtxt      "Notification Description
                 and  so on  ..........             
    how to do this ... can any one give sample code... or logic

    Hi Victor,
    I have a simple solution for this.i think it will help you.Do u have any idea about query designer in SAP.
    by using it we can satisfy u r  reuqirement.follow the below steps.
    1)Go to SQ01
    2)In the screen click on QuickViewer option.then you will go to another screen.
    3)In that screen give any name starting with 'Z' in the QuickView box and then click on create.
    4)In the dialogbox enter title and comments and then select LogicalDatabase as the DATASOURCE and give DataSourceLogicalDatabase as EQI.check the radio button Basis Mode and then click on ok.
    5)then on the screen in the first half of leftside you will  get another screen with the columns DATAFIELDS,LISTFIELDS,SELECTIONFIELDS,TECHNICALNAME.
    6)In the DATAFIELDS column expand the tree,then u can see the fields what we have,and what you want.and also you can see the check boxes in front of the columns LISTFIELDS,SELECTIONFIELDS.
    7)LISTFIELDS means the output fields,SELECTIONFIELDS means the selection screen fields(equnr).
    check the checkboxes as per u r requirement and click on execute.
    8)then a progam will be created.to know the program name after executing the program GO TO
    SYSTEM->STATUS.then u can see the program name there.
    If u know all these,let me know so that i can try for another solution.
    Thanks,
    N.K.C

  • When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

    When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

    Hi screen name,
    Adobe PDF printer gets installed when you install Acrobat 10 Pro.
    To use this printer you need to purchase Acrobat. Once the trial period is over you cannot use the printer to create pdf files.
    An alternative way for you is to utilize Microsoft's own inbuilt pdf engine.
    You can simply open the file and select 'Save as' and in the type list select 'pdf'
    Please refer : http://office.microsoft.com/en-in/excel-help/save-as-pdf-HA010354239.aspx
    Regards,
    Rave

  • Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

    Hi there,
    Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
    Thanks in advance,
    Grtz T.

    I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
    With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
    The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
    You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
    The HDMI Detective should solve your handshaking problems.

  • I want to use the free photoshop trial which I thought I was downloading but have adobe assistant??!

    I want to use the free photoshop trial which I thought I was downloading but have adobe assistant??!

    You can initiate a download of the install files for Photoshop CS6 within the Adobe Download Assistant.  Once you sign in you can select the product you wish to download from the bottom portion of the screen.

  • Can I use the screen of my iMac G5 by linking it to my MacBook Pro?

    Hi.
    I've seen a lot of producers studio pics, using 2 monitors, it seems to be they've connected there MacBooks up to a 24" + TV/computer screen,
    I would like to know how to do this, what cables i need etc. Also, I havent got a spare monitor anywhere, but i have a iMac G5 (power PC) in my studio, could i possibly link my macbook up with my G5, so i can work on my MBP and use the screen of the G5 mac?
    Thanks!

    What cable you need depends on which ports the monitor and computer have. If you want to use a monitor built into a computer, the cable required is an Ethernet one unless otherwise noted; this also requires setting up Virtual Network Computing.
    (75893)

Maybe you are looking for