I want to use the sound card with LabView
Hi. Who can help me, I want to use the sound card with LabView, I have found the function but I can't use it. Thanks.
Christi,
In LabVIEW 6.1 I found some examples they use those sound VIs. They are located in \examples\sound folder. Those examples should give you a good overview how to use the VIs.
Hope this helps
Roland
Similar Messages
-
Can Windows XP use a different sound card for itunes - I want to use a sound card for itunes and another for all ther apps
To the best of my knowledge, Windows is not capable of setting a specific sound card based on the app being used, it's all or nothing.
Try a google search or search the Microsoft site. -
I want to change the sound card on my phoenix 1215t is it possible????
I want to change the sound card on my phoenix 1215t is it possible????
NO, none of the HT/Omega products will work in your computer... with the exception of the "eClaro" and only the "eClaro"
Please send KUDOS to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Hello, deployed an want to use an itunes gift card after I put in the number to use it and purchase music itunes continues to take me back to the credit card billing page. I only want to use the gift card, how to I get pass the credit card billing page. Also as soon attempt to put in my new credit card number it immediately times out can this be associated to where I'm located?
Go to your account on your computer and set the credit card to none. This will allow you to use the gift card.
-
I have been checking around and have noticed on some of the web cast sites that there are possibility in using multiple sound cards on one machine. The basic functionality is possible pending IRQ and BIOS settings.
I currently have an older SBLive Platinum W/ Live drive and have tweaked it out pretty nicely for basic I/O.
I was capable of getting most of the routing possibilitys working on that EMU Chipset with an opensource program I found a while back along with the Audigy drivers. I would like to keep using the card and the bay. Could revert very easily back to the original software and drivers.
Enter problem........
I have been made aware of the possibility that the X-Fi Platinum is "in the cards" for X-Mas. And I am intrigued by the newer functionality. Then I start thinkin' see....
2 bays
2 cards
2 midi in
2 midi out
2 headphone
etc. etc. etc.
What about 2 seperate sets of control software that is used for each card. Main output from one, monitor output from the other. Control room out from one, Tape out out the other. ASIO, ASIO, ASIO Hmmm.
I have no experience using two cards in one machine but considering I was given' the first card to begin with and now I may be gettin' a second one of higher quality I wonder If anyone has any data concerning the 2 card issue.
Thanks for any responses in advance.Hey....
Interesting that this post has a view of 77 and the response I get is a question...... but cool.
I will try to help.
Not that familiar with the 2000 Platform but I would start by doing a full uninstall of the current drivers and software for the SB Platinum. Download the LiveDrive-Uni Pack from the update link. Getting rid of your old audio drivers is a fairly importaant step.
http://us.creative.com/support/downloads/downloadive
Then DL the software if you want all that stuff.
I remember that when I first started fiddling with this unit I had a similiar situation where I could not get the audio on the front bay to function properly.
I think the driver update took care of the issue.
At any rate .... I have just done a clean install of XP, got the video card screamin, and I am going to re-install the Platinum with the drive tonight. I am going to try with a minimum of the bundled software so driver and AudioHQ with Creative mixer are about all I am interested in.
The Emu 10kx drivers are supported on this card as well as the Audigy, with that said the Kx drivers from Lugosoft might be of interest if you cant get the Creative stuff working.
I will post again with the process if all goes well.
There is a whole slew of settings that could go wrong with this IMHO 'GLITCHY' card.
I am gonna' get it to work with the new X-FI If my life depends on it.
http://kxproject.lugosoft.com/index.php?skip=1 -
Using the sound enhancer with the preset equalizer settings
How do I use the 'sound enhancer' along with the preset equalizer settings, like 'rock', etc.?
Hello, Troy.
Below is the article about the iTunes sound adjustment feature that you may find helpful.
iTunes 11 for Mac: Adjust the sound quality
http://support.apple.com/kb/PH12134
Cheers,
Jason H. -
I don't want airport! I want to use the usb card I own!
I have read all applicable posts on the subject. It hasn't really helped.
Here's my situation: I moved back into my parents' house temporarily for two months while I pick up some summer classes I couldn't otherwise take, and I have set up a wireless network so their settings can remain the same (and they'll keep all the equipment in their room, as they demand).
I have a mac mini, never dreamed there would be an issue using wireless usb network cards, suddenly there is, no one will help. Linksys says the cards (wusb11 and wusb54g) don't have mac drivers, and that's all they'll say. Apple won't even help me find third party but demanded I buy an airport card. This did not endear me to purchasing another product from apple.
Well, I gotta be honest here, I DON'T WANT to spend $79-99 on an airport card. First off, I really can't afford to, and second it's the principle of the thing. I shouldn't have to. It's a USB device, mac has usb ports, there should be no issue. Now, the wusb54g is still in the packaging and can be taken back, but it was only $40-something, so that's my price range.
Essentially I have three questions:
1) Can I get my linksys cards working?
2) If not, what card within my price range DOES work?
3) If I cannot get my mac mini online, is there a way to wire it to another computer independent of any other network (perhaps via another router?) At least then my windows box could be online and I could still transfer files back and forth between it and the mac mini.
Thanks for listening. I am beyond frustrated.Well, I am very satisfied with my linksys usb adaptors on my PC, and all other PCs I have tried them on. Besides, I'm not asking if they work well or not, I'm merely asking do they work at all. Your idea of well and mine may be different. I'm just interested in the facts.
Once again, even if I understand what you meant by a "standard" airport card (you mean there's more than one?), I think I was pretty adament that I did not want an airport card. I just don't. The price coupled with Apple's strong sell made that one product I'll only buy if I absolutely have to, and I'll explore every other option first. Furthermore, I asked about third party adaptors.
I have a crossover cable, so that'll probably do it. I wasn't sure if the mac would be able to work the same way. Is it just as easy to set up? Am I better off connect them to another router?
Anyhow, I do appreciate the response, so thanks. -
If I sell my ipad can I use the SIM card with the new Macbook Pro
Hi, I'm looking at two scenarios I need help with. I still have a contract for another 12 months with EE which gives me 2gb of data monthly on my ipad mini. If I sell the ipad mini can I use the micro SIM card in a......
A) a new iPod Air
Or
B) a new MacBook Pro with Retina.Scraggy78 wrote:
Hi, I'm looking at two scenarios I need help with. I still have a contract for another 12 months with EE which gives me 2gb of data monthly on my ipad mini. If I sell the ipad mini can I use the micro SIM card in a......
A) a new iPod Air
Or
B) a new MacBook Pro with Retina.
After researching this topic, I found the placing an old SIM card in a new iPad would be impossible. There is no way for consumers to remove the back cover... Without dropping it off a building. My best suggestion: Use the current plan up first. Then buy a new plan. -
I want to use my itunes gift card... everytime i try to download music it keeps going to my debit card information. Why wont it use the money that is credited to from the itunes card?
Did you perhaps create multipe Apple IDs without realizing it?
To investigate, go here. -
My current Iphone 3 is not working properly. My wife just upgraded to an Iphone 4. I am planning on using her old 3 model. I want to save the contacts on my 3 to the sim card and then import the contacts to "new 3". I cannot figure out how to save contacts from phone to sim card. can that be done, if so how??
Contacts cannot be saved to the SIM card on an iPhone. Contacts are designed to be synced to a supported application on the comptuer. That would be Outlook or Windows Address Book, Windows Contacts on the Windows computers and Address Book on a Mac. There are also web based solutions such as Yahoo or Google. Contacts would have to be saved there and then synced to the new phone.
-
"How to use an Appplicom card with Labview and a Seimens PLC"
Hi, I am using an applicom card type PCI1500-PFB to communicate with a Seimens S7-300 CPU315-2DP plc. I am using this simply to display in a labview front panel the outputs of the plc and may in the future use switches on the front panel to control the inputs of the plc. How do I do the communication? I have setup the applicam card and have comms with the plc I think. I am trying to use data socket to communicate to the plc via the applicom card. Any suggestions?
Thanks
TomThere�s a fair bit of documentation on NI�s site regarding the Applicom card.
The following doc does a pretty good job summarizing Applicom's PCCONF and PCINIT, and the use of ReadWait and WriteWait to ensure you�ve got communication with the between the PLC and the Applicom card:
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/5913e03f551de3f786256a32005b4586?OpenDocument
Since it doesn�t sound like you�re using the LV DSC module, you can stop reading once it gets into connecting to Lookout Objects.
Once you�re sure you�ve got comm, you can do some quick tests in LabVIEW using front panel datasocket connections as shown on page 11-12 of the following:
http://www.ni.com/pdf/manuals/323241a.pdf
From there, it all depends on
the complexity of your system. If simple, you could just stay with front panel connections, or you could move to programming with the Datasocket Read and Write functions.
... and if you get to the point that Datasocket is too slow and cumbersome, you might want to look at the LV DSC module:
http://ni.com/labview/labviewdsc/what_is.htm?node=10418
=====================================================
Fading out. " ... J. Arthur Rank on gong." -
Has anyone used the NAG libraries with LabVIEW?
I try to get the "g08cgc" (chi-square calculation) running, but LabVIEW hangs up everytime I start the VI..
Some tipps ... ?Here is the code (wirtten with LV7.1)
Let me say that I'm a newbie using statistical functions and calculations.....
For the calculation of Chi-square I have the followind input variables:
- measured values
- calculated values
- coefficients
If you/someone can give me some tips how to calculate chi-square with this input variables it would be very helpfull (e.g. maybe MS-Excel can do this,too ?! Using .NET etc?)
Thanks in advance!
Message Edited by _avr_ on 01-19-2009 01:43 AM
Attachments:
NAG_g08cgc.vi 38 KB -
Is there a way to transfer itunes purchased with a credit card to iTunes gift cards redeemed today?
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Can I use any acquistion card with Labview?
I have got a non NI acquistion card, how can I use LabVIEW to program it?
> But are all the software drivers provided by vendors recognized by
> LabVIEW? In other terms, must these drivers get a satandard
> architecture or protocol so LabVIEW can communicate with them? Or, if
> I develop my own acquisition card, how can I write it's driver so
> LabVIEW can communicate with it?
The LV drivers for various NI products are essentially VIs that call
into a user level DLL. That DLL does its work and returns the results
and/or error info to the diagram.
If the board has a DLL that allows it to work, then you can make quick
wrapper VIs to make it fit the LV language a bit better.
There are no architectures or protocols for drivers to replace NI-DAQ or
other NI driver wrappers.
Greg McKaskle -
Is it possible to use the agilent e3633a with labview 6.1?
Hi
at first, please excuse me.
my english is bad
if you can see in the header, i try to controll the e3633a with lab view 6.1. i´ve downloaded, the hpe363xa and controll with this vi my 3632a without any kind of problems.
could i control with this vi the 3633 too?
some kinds of modification requiered?
the vi for the 3633 requieres at least lab view 7.0, but i only work with 6.1.
thx
Wish you a great weekend.
mfg
timoHi
I found the answer of my question.
I had modified the initialize and the current range.
timo
Maybe you are looking for
-
Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
adobe photoshop elements 11 won't read my canon T5 raw CR2 files. why? need help! Solved! Go to Solution.
-
My Library folder is missing-where did it go?
My mail app has stopped working. It was suggested in another thread that I go to the mail folder in the Library folder and delete some items from the V2 file or folder. Problem is, I have no Library folder. Not there. Missing. Utterly confused. Searc
-
Can't install Blackberry Link in window XP
Hi all, when I install Blackberry Link in window XP, error prompts up "Error signature AppName: peermanager.exe AppVer: 1.1.0.14 ModName: msvcr100.dll ModVer: 10.0.40219.1 Offset: 0008d6fd" Already tried different methods, applie
-
Hi , Please check the output of the commands [# vmware-config-tools.pl -h VMware Tools 3.0.2 build-52542 for Linux configurator ..# vmware-checkvm VMware software version 6 (good) So which command do beleive ? One says ver 6 and the other says 3.0.2
-
Non-standard EDM Profile intervals
Can 15 minutes intervals like 05,20,35,50 be accommodated in EDM. 00:05 00:20 00:35 00:50 01:05 23:50 To my knowledge, it cannot be. We just had got an interval meter readings like that under a test scenario. Also it does not make sense as the RTP pr