I was told you you could view your app from your Iphone on the TV using Apple TV, such as the AFL football one i have purchased through the App store.
I was told you could view your app from your Iphone on the TV using Apple TV, such as the AFL football one i have puchased through the App store. Is this true?
Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/
Similar Messages
-
Is it possible to change what the "slide to unlock" says? I was told you could personalize it to say whatever you want.
yes you can change is there are some free and some paid apps in the apps strore search them and you will find then
<Edited By Host> -
My iPhone 5 lock button is broke can I take it to apple to get fixed on warranty even though it's from carphone warehouse ?
Apple handles all iPhone warranty/support in the UK. Be aware, Apple does not fix iPhones in the UK, they replace them. So, before you go to an Apple store, backup your phone. If covered by warranty, the phone will be replaced for free. If not under warranty, the cost will be US $229.
-
How do you close open sites? Before you only needed to hold your finger over icon until it jiggled, then tap to exit. Downloaded IOS 7 and big changes happened. Sure it is a simple thing to do but I need the help of Apple Support Communities. Thank you for any help you can provide.
Double tap home button then sweep apps up to close.
-
What do apple check when you give them your iphone at the store?
when you go to the shop what exactly do they check? i know about water sensors but what else? my lock screen button isnt working.
Why? What did you do? If the phone is jailbroken, hacked, or has been otherwise altered, they will turn you away. If it shows signs of physical damage or abuse, the warranty is void.
If it has been physically modified or opened/serviced by someone other than Apple, you will be turned away. -
How do you completely cutoff your iPhone so the thief can't use it anymore?
I know there is a way to turn it off completely so it is basically a dead phone.
If it is configred with Find My iPhone on iCloud, log into iCloud and erase it.
Allan -
Would like to know if you can sync your iPhone to the iPad?
I teach and my students will be using the iPads outside of my room at times and I'm tryinG to find out if there is a way to sync the iPhone up to my iPads to see what is going on?
No
-
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.
-
"itunes could not connect to the ipod becasue it is locked with a passcode. You must enter your passcose on the ipod before it can be used" BUT i cant unlock it and i dont have the original itunes that is was hooked up with before either. HELP! It wont let me restore because it is locked. I cannot unlock it. I have tried everything online. nothing works.
Place the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?
In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?
If you're referring to desktop icons, right click on the desktop > Show view options > check "show item information".
-
I am trying to use Itunes to move my data from my iphone 4s that was backed up on my Macbook Pro. I keep getting an error code backing up from ITunes to new Iphone 5s:iTunes could not back up the iPhone “Karen’s iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be backed up. On the Iphone it keeps telling me to add another network. I have put our home network on the Iphone. When I put the passcode in the phone does not give me enough time to put my Apple ID password in and it shuts off. Help!
<Email Edited by Host>FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
iTunes could not connect to the iPhone “Rasmus's iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes. - Why is that?
iTunes is asking you to provide the passcode that was created when the device was activated.
You are able to get around the passcode if you know the apple id login and password and are able to restore the device back to default settings.
See this article for further directions:
http://support.apple.com/kb/HT1212
good luck. -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
Maybe you are looking for
-
How to dual boot with Windows 8.1 and Arch?
Hello everyone, I've been looking into using Linux as my daily driver since having some experience with it on a server. After some digging around, I think Arch Linux is the best distro for me, now onto where I am. I'm currently running Windows 8.1 (u
-
How to align the components in panelGrid right?
I have a panelGrid with two column, the left column is a image and the right colum is commandLink. <h:panelGrid border="0" columns="2" width="100%" columnClasses="headerColumn1, headerColumn2"> .headerColumn1 { vertical-align: top; width: 50; .header
-
SAP underlying Database attributes needed from RFC. (Database DB2)
working on a tool which gets performance attributes of the system. Like OS performace, DB Performance, SAP Applicaition performance etc. I am investigate how to pull SAP underlying DB attributes. They already have an Agent which does that for SAP DB
-
Application crash on showing alert message after closing document in CS5
My application crashes when I show alert message after standard close using IDocFileHandler's close method i.e Close( doc, uiFlags, allowCancel, cmdMode ); Before calling this method there is no crash on showing alert messages. i.e just one line bef
-
Expression Language: The Empty Operator
Does anyone know how to use the empty operator? I have a JSF page element in which I'm trying to render/not render based on the 'emptiness' of the referenced collection. <h:panelGrid columns="1" rendered="!empty#{model.theList}"> <h:outputText value=