I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the one PSD files by distorting the images and colour. Does anyone know how to recover the original images?
I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?
What version of Photoshop are you running?
I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
see image below for example:
Similar Messages
-
i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?
How did you get them to install the first time and where did you get them?
Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
Here's the Boot Camp Manual. -
i got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this and get my information back?
Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
More info on backups here: http://support.apple.com/kb/HT1766 -
Does anyone know how to recover contacts that have been gone missing or have been deleted somehow. The contacts that are missing are the ones where I only had phone numbers (no email address). The ones where I have both phone numbers and email addresses are ok. They are the same ones I have on my laptop. I dont know what I did to cause the ones with phone number only to disappear.
Good Afternoon irish357,
I know the importance of saving and updating your contacts. What type of phone do you have? If you are using Backup Assistant, you have the ability to sync the contacts between your laptop and phone. You will also be able to see if all your contacts are stored on the online portion of the application versus the phone itself. The contacts should be the same for both online and the phone.
I have attached a link below for your reference.
http://bit.ly/rKiyOf
I hope this information is helpful in resolving your concerns.
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?
You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.
-
If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms pleaseThe only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
Allan -
Does anyone know how to calculate the impedance using waveforms
does anyone know how to calculate the impedance using waveforms?
studentproject wrote:
the waveforms represent the voltage and current values across a capacitive load. I am trying to find out if there is a way to do automatic calculations using the inputs from the waveforms
Hopefully a single sinusoid tone. Otherwise things get really interesting. Also know that impedance is based on the frequency. I'll have to dig into this again. I have not had to calculate an impedance in well over 10 years.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.
Have you tried Windows Update in the Control Panel?
Many times it will find the newest supported drivers for Hardware.
Just be sure to install everything not just the Important ones.
Let us know if this helps. -
Does anyone know how to update the software on an iPhone 4 when there is no software update button?!
Does anyone know how to update the software on an iPhone 4 when there is no software update button?!
Many thanks.Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS version supported by the device’s hardware.
(83714) -
My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?
Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out. -
HT4314 does anyone know how to recover game center's drgonvale levels for my 6 year daughter.
does anyone know how to recover game center's drgonvale levels for my 6 year daughter?
maybe i' asking in the wrong place.
thanks for taking time anyway.Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?
You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.
-
We downloaded Office2008 update June 13th. Now our Office programs won't open. Is this happening to others? Does anyone know how to fix the problem?
This is the message box content we get when trying to open Word:
Process: Microsoft Word [309]
Path: /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
Identifier: com.microsoft.Word
Version: ??? (???)
Build Info: Unknown-101117~0
Code Type: X86 (Native)
Parent Process: launchd [109]
Date/Time: 2011-06-14 05:34:15.752 -0400
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Sleep/Wake UUID: FDFC3F45-E8C8-4D18-A0C4-EA3C76AD2547
Interval Since Last Report: 11753 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 12
Anonymous UUID: DDF6AE0D-E118-4768-9B04-8CDCB6D7C62E
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
Referenced from: /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyldYou will need to contact Microsoft for a fix. They also have a message board. Post there if you cannot find an answer after searching their message boards.
-
My iMac fails when I try to upgrade from Snow Leopard 10.6.8. I have to boot up from disk. Does anyone know how to overcome this problem? I need to upgrade in order to install latest software.
It would be lovely to know what your talking about. Upgrading from Snow Leopard does not involve discs.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
OB52 Posting Period Close: Does anyone know how to automate the close?
Does anyone know how to automate the FI Period Close (trans code OB52)? Currently, the business users go into the screen and open and close any periods manually. For the MM period close, we are able to do so because we found the program to use in the batch job. For some reason, the FI side shows the program SAPL0F00 but this is only a view and will not allow a batch job to be created. Does anyone know of the actual program used for the FI period close?
Use program RFPERIOD_OPEN. It may help. For further details you may check the following thread.
RFPERIOD_OPEN
Maybe you are looking for
-
Can we Run FORMS which is compilied in 10g and it Run Forms Run time in Oracle 6.0i ???
-
Hi i am wondering how i can use named destinations that has special letters in them linking from a homepage? My Document.pdf#target dãc I get it to work using the command line: AcroRd32.exe /A "nameddest=target dãc" "My Document.pdf" and i get html l
-
Windows 7 32 bit HP Pavilion dv6700 laptop from 2008 Sorry for the obscure title, but it's a little hard to explain in a few words. Okay, so I installed Windows 7 on my new PT64GS25SSDR ~ Patriot Torqx TRB. It worked fine. I booted into Windows and e
-
Reading environment varaibles within Crystal
Is it possible to read the values of environment variables within a Crystal report? In other words, if I set an environment variable on a PC where I am running a Crystal report, is it possible for Crystal to read the value of that variable? Regards,
-
IPhoto discontinues access to previous files?
I have received an update notice which includes the following statement: (They won't let me access the screen shot, nor make a copy of the notice so I'm copying it here.) The photo library needs to be upgraded to work with this version of iPhot