I water damaged my iPhone and want to get my photos back. My iPhone was ios7 but my icloud synced to my work ipad on ios8. Is it now impossible to view any data from ios7 on icloud drive? Any help to get my photos back please!
I damaged my iphone 5s and want to get my photos back. It was submerged in water for a good five minutes (and is now in rice) but I'm pretty sure it's dead.
I really would like to get my photos back. I wasn't plugging in my iphone and backing up, I just assumed it did it automatically because about a week ago I had a message saying automatic backups were stopping as my icloud was full.
My work ipad is running on ios8 (as of a few days ago!) but my iphone was on ios7 as I didnt have enough space to install the update. This means that my icloud is now icloud drive and I cannot view the stuff from my ios7 device without upgrading it to ios8. Trouble is, I cant upgrade it because it's in a rice bowl.
Any help would be greatly appreciated! Any idea if I will be able to access my photos on icloud at all? I'm not very hopeful for my phone working again and downloading things that way!
Thanks!
Photos that are in the cloud stay there until they are removed by a device that has the right privileges. If your iPad is logged in with the same AppleID, then doesn't it show the photos from iCloud?
You will only be on iCloud Drive if you expressly chose to upgrade.
Similar Messages
-
Can I recover data from a reformatted hard drive? I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3). My bad but is all lost?? Years of very important information....
You will need to purchase reovery sofware such as such as FileSalvage
http://subrosasoft.com/software/filesalvage
You can download a demo copy that will tell you what it can recover
If you want to recover that you must pay for the software then
When you do the recovery, you will need another disk drive to receive the recovered files
Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
Allan -
CC 5.2 Alert Generation - Not extracting any data from SAP
Hi there,
We are trying to use the alert function for critical transactions in CC 5.2. We have set the relevant parameters in CC. The Alert_Log.txt is created successfully but it is not extracting any data from SAP. Is there any settings that I am missing here, both in R/3 and CC 5.2? I really appreciate your help. Below is the Alert_Log.txt for your review.
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
FINEST: Analysis Daemon started background Job ID:41 (Daemon ID D:\usr\sap\CC1\DVEBMGS00\j2ee\cluster\server0\. Thread ID 0)
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Scheduling Job =>41----
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:41 (GENERATE_ALERT) - AlertGeneration_Testing
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Running
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=1, message=AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Alert Generation Started @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Conflict Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Critical Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Mitigation Monitor Control Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@@@@ Backend Access Interface execution has been started @@@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@System=>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
No of Records Inserted in ALTCDLOG =>0 For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********SOD Tcode Size=>0**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********Alert Tcode Log File=>D:\cc_alert_log\cc_alert_log1.txt is created**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
File Output Log File Size ==>0----
For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: -
Conf Last Run Date=>2007-12-12--Conf Last Run Time=>12:45:11--
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: ==$$$===Notif Current Date=>2007-12-20==$$$==Notif Current Time=>14:27:32===$$$===
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>1
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CONFALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>2
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CRITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>MITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Start AlertStats.............
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: start:Sat Dec 01 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: now:Thu Dec 20 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: end: Tue Jan 01 14:27:32 CST 2008
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Month 2007/12
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@=== Alert Generation Completed Successfully!===@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Complete
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
0@@Msg is Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=0, message=Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>41----Hi,
we have ran into similar issue of alert log being not displayed accurately in CC 4.0 version and we implemented the Note 1044393 - CC5.1 Alerts, it did work for us, as you are using CC5.2, I would recommend you to check the code and then try this note. But iam still skeptical whether this note will be helpful to you or not.
Thanks,
Kavitha -
I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?
Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
..Step by Step to fix your Mac
Another method is to copy the entire folder, then change it's permissions. -
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
I want to sync my ipod touch with my new computer. But I don't want to lose any data from my apps.
I want to sync my ipod touch with my new computer. But i don't want to lose any data from my apps. If i erase and sync does it only erase music and videos or does it include apps as well? I specifically don't want to lose any data from Instagram, I don't want to have to start over. Any help is greatly appreciated Thanks
Copy everything from your old computer to your new one.
-
Can I restore settings, apps and data from an external hard drive to new Macbook Pro?
I recently lost my Macbook Pro to water damage. It was about 3 years old and tuned for comfort. Unfortunately, my most recent backup is at least 3 months old. I purchased a new MacBook Pro and I'm wondering what my options are for migrating my settings, apps and data from the old hard drive to the new MacBook Pro? I have a USB drive bay that I plan to attach to the new MBP to gain access to the old hard drive. Someone suggested Migration Assistant but my research hasn't turned up any information about migrating data from an external drive.
Any help would be greatly appreciated.THANKS! I guess my research wasn't THAT thorough. I booted with the external drive attached and setup immediately gave me the option to setup using Migration Assistant. It was a little slow via USB (2+ hours) but it was nothing compared to the time it would have taken to do it manually. My new 15" MBP looks exactly like my old 13" MBP. AWESOME!!!
Thanks again! -
B2B adapter is not polling any data from EDI X12 810 ECS file
Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AMHi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code B2B-50547
Error Description Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id 7F00000113CFC36785C0000017D7E2B0
Message Id 7F00000113CFC36785C0000017D7E2B0
Business Message 7F00000113CFC367A450000017D7E2B7
Packed Message Packed Message
Payload Payload
Protocol Message Id EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest Message Digest
Digest Algorithm
Transport Protocol File
Transport Protocol Version 1.0
Url file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates certificates
State ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size 2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM -
My mac and I rely HEAVILY on the use of alias files and folders. The simple version of my question is: When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact? These are not symlinks or symbolic links, they're all alias files and folders.
Is there any software out there that might help me with a solution? Are there any tricks or tips you can give me to try?Use either Setup Assistant at first start, or Migration Assistant on subsequent occasions and all will be transferred intact. Given your wording I presume you are Unix savvy and will appreciate the problems that duplicate userids would cause, so of you use MA for the migration, make sure the target Mac has no userid equal to that on the source and you will be fine.
SA does not have these issues since it runs before any user account is created, so it can simply copy over everything. But MA runs after the fact and only solves the issue partially by changing the UID in the user directory, leading to permission problems. -
The screen is black . i can.t get it to respond.Power + home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn't ring/screen did not light up. Its a iphone 4. Any ideas how to fix this?
If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation
-
Safari cannot open RSS feeds - "could not load any data from this location"
I can't seem to open any RSS feeds inside of Safari. I get this error message:
Safari can’t open the page “feed://feeds.macworld.com/macworld/all” because it could not load any data from this location.
This has happened on every single feed. I just installed Leopard. Anybody have any hints for me?Hi
First try Safari from another User Account. When you open Safari, make sure RSS is enabled in the Safari Preferences>RSS. If you can access the feeds there then there may be corruption in either the database or RSS preference files in your Regular User Account. If no go here, then I suggest you reinstall Safari. See this thread for directions.
If the feeds work in the other user account, go back to your regular User Account: Open the Finder: Your User Account>Library>Syndication folder. Move the database3 file to the desktop, then restart Safari. Try an RSS feed. If no change, move the database file back to its original location.
Then move these two preference files in your User Library>Preferences to the desktop:
com.apple.SyndicationAgent.plist and
com.apple.Syndication.plist
Restart Safari. Again, try a feed.
Post back -
I Have an AT&T iPhone 6 and wants to give my AT&T 4 to my wife but she is a Sprint customer. Is this possible and, if so, how involved is it to convert my 4 from AT&T to Sprint?
Likely not possible.
Sprint is a CDMA carrier which typically do not support BYOD (Bring Your Own Device) .
You will have to ask Sprint if they can offer service on a unlocked GSM Phone that does not have the CDMA chip.
Its unlikely they will though. But if they do, you will need to request AT&T unlock your iPhone so you can insert a Sim card form another carrier into it -
I rented a movie through itunes on my ipad and wanted to watch it with friends on a digital projector, but it wouldn't allow me to do it. Is there any way around this?
The issue was that a dialogue box came up which said that I couldn't play this movie on another device. I tried playing the same movie on an Tv with an HDMI connection attached to an adapter to the IPad and that worked. I wonder if the problem is that the digital projector has a VGA connection.
-
can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?
Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
btw - what are the symptoms of your failing drive?
-mj
Message was edited by: macjack -
i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?
Welcome to the Apple Community.
Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.
Maybe you are looking for
-
How to get detail info of application acknowledgement in BPM send step
Hello in BPM we will send an async message to SAP backend system, we need to know if the message is successfully process or not, if not, we need to get the detail info which is returned in the acknowledgement message. As you know in PI monitor, you c
-
Getting videos from Time Capsule to my Apple TV
I just got a time capsule and would like to stream my videos to my Apple TV. I know I need a device in the middle Mac, iPad, etc. But do I need to add the videos to iTunes first or can I play them via a file manager type app? They are all in the m
-
On my MBPro Retina, from one day to the other the windows became slightly transparent. So when an application with a dark background is opened full screen, I can slightly see my Finder windows behind. I don't have this behaviour on my iMac. Any clue
-
Full screen video on secondary display
I am using a Sharp LCD as a secondary display on an Intel 24" iMac using Snow Leopard. In Quicktime I am able to watch a full screen movie on the secondary display whilst working on the iMac. However when watching youTube or other wed-based video on
-
Performance tunning for select statements using likp lips and vbrp
Dear all, I have a report where i am using select statements using first on likp the for all entries of likp i am taking data from lips and then for all entries in lips i am taking data from vbrp by matching VGBEL and VGPOS. Now the problem is tha