I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

Yes, you can!(:
STEP 1: Open iTunes
STEP 2: Navigate to the "iTunes Store". It can be found under the "STORE" tab.
STEP 3: On the right side of the store there should be a "Quick Links" Section. Click on the "Purchased" link.
STEP 4: Navigate to the "Music" tab and click on "All Songs". Then at the bottom of the screen there will be a button that says "Download All". Click the button and your songs will be begin downloading!
NOTE: This will only work with songs that you bought from the iTunes store, if you imported them from a CD, you will have to do it again.
NOTE: You can also do this with Apps, Movies, TV Shows, and Books.
NOTE: You may have to sign in with your Apple ID to verify the download.
Hope this helped! Enjoy your music!(:

Similar Messages

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
Regards.

Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

Never mind, I finally got it working, thanks!

How easy it it to unsync an IPod classic and then sync an Iphone 4s on ITunes

I have a new machine!
How do you UNSYNC an I-Pod classic, and then sync an IPhone 4s to ITunes.
Thanks
AJ

There is no need to unsync an iPod Classic to iTunes library, your iTunes Library can be sync to more than one mobile device.
So just plug in your iPhone and sync it.
However if you want to delete the music from your iPod Classic, just plug it in and press Restore, or to another PC iTunes, and sync from that PC, it will delete and replace your iPod with the music from that new PC itunes.
Have a nice day!

IPHOTO says photos saved with newer version of IPHOTO. How can i get the new version of IPHOTO back on my system?

I loaded IDVD on my IMAC. Now IPHOTO will not open pictures due to pictures saved with a newer version of IPHOTO. How can i restore the newer version of IPHOTO back on my system?

Sounds like a possible damage library. Give this a try: make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How do I download I books after it has been interrupted.? I can't get the I books app to load, How do I download I books after it has been interrupted.? I can't get the I books app to load

How do I download iBooks after the app was interrupted? I can't get the iBooks app to download

Sorry, but there is no built-in option to autosplit an exiting project.
Other than
writing a custom Automator Workflow or AppleScript to do that programmatically
or define smart albums or searches for each day, then create a project from each album or search result,
there is little you can do within Aperture once the project has been imported.
For an Aperture Newbie I think the easiest solution (uless you already have invested a lot of work into adjusting and tagging the images) would be to
reexport the gigantic project "Export masters"
and reimport the exported folder with proper import settings.
The Autosplit should be turned on
in the Aperture Preferences -> Import, Autosplit into Projects
and during imort in the Import Panel -> Import settings -> Aperture Library Brick -> Automatically split Projects
Regards
Léonie

Openreach bad workmanship on install can't get the...

Please can someone help or offer me advice on what to do next. On the 6th November I had an engineer’s appointment to install my infinity 2 service. The engineer arrived and I showed him both of my telephone sockets and he asked where I wanted the socket for the hub so I pointed to one of the two sockets which are in the same room and the only sockets in the house.
He proceeded to take my old socket apart so I left him to it. After 10 minutes he asked me to test the service and I did a speed test and was getting 76 meg down and 16 meg up. He said that was him done and left my house.
When I got back to my pc I moved the hub to the other end of the shelf and my broadband disconnected. I subsequently found whenever I moved the cable to the hub it disconnected. Worse still I found, that on close inspection, the engineer has used a second hand face plate which looks like has been in the back of his van for the past year. It is covered in tiny scratches and scuffs. (see photo) It seems that the disconnection problem comes from this socket because if you wiggle the hubs plug at the socket it disconnects. I also found that he had left my telephone unplugged so I plugged it in and I lost sync again. If I plug the phone into the other socket in the room it disconnected as well.
I got on the phone and raised a complaint but I was told that because the order was still showing as in progress I would have to phone again the following day before they could get an engineer back. I phoned BT early the next day and explained what had happened and when we went through some checks and it would appear that none of the sockets are wired up as a master socket. They logged it as bad workmanship and said Openreach would be in contact within 10 days to make an appointment to fix the problem and re-wire a master socket. 7 days passed and I heard nothing so I spoke to BT only to be told that the fault had been closed. They couldn’t give me a reason why it had been closed so I asked for the fault to be logged again and I took a note of the reference number this time.
Now it is 10 days since I reported the problem for a second time and I haven’t heard a thing from BT or Openreach. I phoned BT 3 days ago and was told that Openreach should be in touch with me soon and the lady who I reported the fault with would be in contact but neither have contacted me. So what can I do? I can’t connect my landline phone because it disconnects what little internet I have, my speed is dropping each day because of the frequent disconnections if I so much as plug the phone in or move the Hub lead.
HELP – Where do I go from here?

Hi Prototypeuk,
I'm really sorry about that the engineer has left your BT Infinity install like that. Please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and we'll help you get this sorted. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have new iMac with Lion installed; can I get a free upgrade for my MacBook Pro?

Hello
I recently bought a 27" iMac with Lion installed. Should I be able to download the upgrade for my MacBook Pro without paying. If so what should I do. If I go to the App Store I'll end up paying £20.99
Any help gratefully received
margaret

Margaret,
No you will need to purchase the upgrade. However if you own other Macs you want to upgrade once you have purchased Lion then you can upgrade the additional machines. Of course the additional machines must be using the same Apple ID. As long as the additional machine's meet the minimum system requirements listed below you are all set.
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

I have deleted the last imported photos thinking that the photos were kept in the album, but all my photos are now gone. How can I get the photos back from trash ?

I have deleted my file "last imported photos" thinking that the photos were kept in the album, but now all my photos are gone; How can I recover the deleted photos?
M

If you have emmptied the iPhoto trash then you're going to need a file recovery application like File Salvage

If I bought a new macbook pro with lion how do I get the upgrade to mountain lion for free?

Was wondering how I come about to get the mountain lion upgrade

Free Mountain Lion for qualifying Macs - http://www.apple.com/osx/uptodate/

Remote access VPN with Cisco Router - Can not get the Internal Lan .

Dear Sir ,
I am doing Remote Access VPN through Cisco Router. Before the real deployment, I want to simulate it with GNS3.Need you help to complete the job .Please see the attachment for Scenario, Configuration and Ping status.
I am getting IP address when i connect through VPN client .But I can not ping to the internal lan -192.168.1.0.Need your help to sole the issue.
Below is the IP address of the device.
Local PC connect with Router -2 (Through MS Loopback) Router -2 Router-1 PC -01
IP Address :10.10.10.2 Mask : 255.255.255.0 F0/01
IP address:10.10.10.1
Mask:255.255.255.0 F0/0
IP Address :20.20.20.1
Mask :255.255.255.0
F0/1
IP address :192.168.1.3
Mask:255.255.255.0
F0/0
IP address :20.20.20.2
Mask :255.255.255.0
F0/1
IP address :192.168.1.1
Mask:255.255.255.0
I can ping from local PC to the network 10.10.10.0 and 20.20.20.0 .Please find the attach file for ping status .So connectivity is ok from my local PC to Remote Router 1 and 2.
Through Cisco remote vpn client, I can get connected with the VPN Router R1 (Please see the VPN Client pic.)But cannot ping the network 192.168.1.0
Need your help to fix the problem.
Router R2 Configuration :!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R2
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
ip tcp synwait-time 5
interface FastEthernet0/0
ip address 20.20.20.2 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
ip address 10.10.10.1 255.255.255.0
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
control-plane
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
end
Router R1 Configuration :
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
aaa new-model
aaa authentication login USERAUTH local
aaa authorization network NETAUTHORIZE local
aaa session-id common
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
username vpnuser password 0 strongpassword
ip tcp synwait-time 5
crypto keyring vpnclientskey
pre-shared-key address 0.0.0.0 0.0.0.0 key cisco123
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp client configuration group remotevpn
key cisco123
dns 192.168.1.2
wins 192.168.1.2
domain mycompany.com
pool vpnpool
acl VPN-ACL
crypto isakmp profile remoteclients
description remote access vpn clients
keyring vpnclientskey
match identity group remotevpn
client authentication list USERAUTH
isakmp authorization list NETAUTHORIZE
client configuration address respond
crypto ipsec transform-set TRSET esp-3des esp-md5-hmac
crypto dynamic-map DYNMAP 10
set transform-set TRSET
set isakmp-profile remoteclients
crypto map VPNMAP 10 ipsec-isakmp dynamic DYNMAP
interface FastEthernet0/0
ip address 20.20.20.1 255.255.255.0
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map VPNMAP
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpnpool 192.168.50.1 192.168.50.10
ip forward-protocol nd
ip route 10.10.10.0 255.255.255.0 FastEthernet0/0
no ip http server
no ip http secure-server
ip nat inside source list NAT-ACL interface FastEthernet0/0 overload
ip access-list extended NAT-ACL
deny ip 192.168.1.0 0.0.0.255 192.168.50.0 0.0.0.255
permit ip 192.168.1.0 0.0.0.255 any
ip access-list extended VPN-ACL
permit ip 192.168.1.0 0.0.0.255 192.168.50.0 0.0.0.255
control-plane
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
end

Dear All,
I am doing Remote Access VPN through Cisco Router. Before the real deployment, I want to simulate it with GNS3.Need you help to complete the job .
Please see the attachment for Scenario, Configuration and Ping status. I am getting IP address when i connect through VPN client .But I can not ping to the internal lan -192.168.1.0.Need your help to sole the issue.
Waiting for your responce .
--Milon

I want to buy a MBP with retina display, can I get the keyboard in another language than the ones listed?

I would like to buy my new mac in the states, but want the keyboard to be in another language than the ones listed (english, french, spanish and japanese). Is this possible if I contact them?
Btw, I know that you can change the language in settings, but I want the physical other keyboard, not to just change it on the mac!

EmilyVictoria wrote:
hopefully they can do the same at the apple store Thank you!
I think they can from a physical retail store, but you should ask them directly. Normally the kinds of keyboards available via special order should be those shown at the site below, but I have heard that some probably are only available outside the US.
http://support.apple.com/kb/HT2841

New build flat with FTTP preinstalled, can't get i...

We recently moved in to a new build flat, and had BT Infinity broadband and a landline in our previous flat. To be fair, once it had been installed in the previous property, the service was absolutely fine, fast, etc., and almost entirely without interruption. We called to arrange for our services to be moved to the new property, and an order was created.
After moving in to the new flat, we discovered that an FTTP terminal had been preinstalled in all flats throughout the development (but we didn't really know what this was). We checked up on the order on MyBT, and it seemed the order to move had disappeared, although our old services had been stopped and the cancellation order completed.
From this point onward, we've been going through what seems to be the common unpleasant cycle of frustration.........trying the automated "help" line (it hanging up, returning to the beginning menu, etc.), unhelpful call centre interactions, not receiving return calls as promised/scheduled, etc.. Everyone we spoke with was perfectly nice, but provided no real information.
During these interactions, I repeatedly mentioned the preinstalled FTTP and offered to give them the serial number, etc. but whoever I was speaking with didn't seem interested. Apparently, our order was being dealt with by some sort of special engineering department, but we've never spoken with anyone in that department. I was given a new VOL number, but that number isn't recognized. After numerous phone calls, I was told to contact the FTTP sales department at 08005874787, which I did yesterday, and spoke with someone who was (by some distance) the most helpful and informative of anyone I had spoken with previously. It might be obvious to some (but wasn't to us), but if you have FTTP in your home, call this number rather than wasting time with any other phone numbers, etc. (at least based on our experience) as communication between different BT departments seems poor at best.
The current situation, as I understand it, is that the BT engineering department does not have an updated database that recognizes our newly built development's postcode, address, etc., and therefore the service cannot be activated (and this had resulted in a cycle of orders and cancellations). We haven't been given a timeline for when this database update will happen (although from what I gather this could take anywhere from a week to months). Virgin broadband has been activated without delay for many people in the development, but as we were with BT previously, we had hoped to just move our services. There are hundreds of properties in the development, so BT is presumably precluding new or continuing business due to what seems a simple clerical/administrative/database issue - and Virgin clearly haven't had any problems.
Apologies for longwindedness and any technical ignorance, but I thought this may be informative for others in a similar position.
Some questions we have, if anyone has any feedback, it would be greatly appreciated..............
- Because we have no idea of when the service may be activated, can we cancel our BT services without penalty (as they are currently unable to provide them and we are not under contract, unless the 'attempted' but thus far failed move means we are under a new contract again)? In which case, we would simply switch to Virgin.
- When transferring the services, we were also charged 65 pounds to move our landline, which we were told would be returned when our broadband was activated - are we entitled to a refund for this as well?
- If we cancel, but need to give a certain period of notice (for example 30 days - I have no idea), but the services are still not activated during this period, would we be reimbursed?

Since posting my original message, no progress has been made. It has all been extremely disappointing, and nothing has changed whatsoever. I have had to continue to call BT repeatedly, and it appeared as though an order was eventually created (previous ones had repeatedly failed and been cancelled). An engineer visit was arranged for today. The engineer was on time, friendly, and helpful, tested all of the equipment, cabling, etc. and said it was fine, contacted his support team, and was told that they were aware of a problem. The problem, as told to me, was that a PTO (precision testing officer) has to go to the exchange and make sure the building is connected properly. Why was an engineer sent, wasting his time and my time (with no apparent hope of success), when they knew what the problem was? No schedule for when/if this will happen was given. So ultimately, absolutely nothing has been accomplished in about two months (from when I first contacted BT to move our services). I tried calling the order tracking number at 01325561339, and was hung up on while in the queue, so I have no idea what the status of everything is.
It is abundantly clear to me now that the communication between different departments within BT is virtually non-existent - fairly ironic for a telecommunications company. I've had to try and piece together what the problem is from talking to various people through this forum, phone calls, the engineer, etc. - surely not my job as a customer? There are so many examples of poor communication within BT, and it is exhaustingly frustrating. For example:
- all flats in our building have the same preinstalled fibre-optic terminal (and therefore could be serviced by the same person), but multiple BT engineers visited multiple flats around the same time - why is this not coordinated? Surely multiple appointments could be attended by the same engineer. With such inefficiency, it is no surprise that appointments are only available weeks away.
- Despite the fact that we are waiting for our services to be activated and currently have no services at all, I have been called by the BT sales team, asking if I would like to sign up (to which I responded that I'VE BEEN TRYING!!....although I never actually left BT as this all started as a home move), and I was also billed for two months of service (only noticed when checking my bank statement - my bills do not appear on MyBT). This indicates to me that there is no communication between the sales, billing, and customer service/order team at all. After yet another phone call to BT, they refunded the charges, but this clearly should not be necessary.
BT can have all the call centers they want (and everyone I have ever spoken with has been perfectly nice), but if the staff have no information and no power to actually accomplish anything, it is all a waste of money and effort. In the interest of fairness, when I have had BT services working, I have had no problem, but all I have attempted to do is have services moved from one home to another (with everything preinstalled - no physical work has been done or needed during this delay). If BT cannot accomplish what should be a routine and straightforward task (in the middle of London), then they are failing miserably as a company. When people laugh, roll their eyes, etc. when the name of your company is mentioned, you're probably not performing very well (it doesn't help when you spend billions on premier league rights while continuing to provide appalling customer service).
At this point I don't even know who to contact so I'm posting here out of frustration. Ugh.

I updated to 3.6, lost bookmarks, have only a default profile so I restored. The bookmarks are now there but I can't get the dropdown list for many folders so I can't access these. Clicking on the arrow to the right of the folder name does nothing.

When I Click on some of the bookmark folders I do get a dropdown list of sites but not always all of the sites that were bookmarked. If I copy a nonresponding folder, the new copy can be accessed but apparently does not contain all of the sites. If I rightclick on a nonresponding folder and use 'open all tabs' Firefox will tell me the number of sites in the folder and ask if I really want to open so many.

Sounds like a corrupted places.sqlite file.
See http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

I need to download Firefox 1.5 or 2.0 in order to run a program that is not supported in the newer versions of firefox. How can I get the older versions?

I need an older version of Firefox to run a program that is only supported on Firefox 2.0 or 1.5. Where can I download this older version of Firefox?
== This happened ==
Not sure how often
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Try the portable version: http://www.freesmug.org/portableapps/firefox/

I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

Similar Messages

Maybe you are looking for