I work from my truck. I use my iPhone almost continuasly. Is it ok just to leave it plugged into the charger all day? So the battery is fully charged when I leave my truck.

I work from my truck. I use my iPhone almost continuasly. Is it ok just to leave it plugged into the charger all day? So the battery is fully charged when I leave my truck.

Yes. Charging automatically stops when your battery is full, & you can't overcharge.

Similar Messages

  • My battery is fully charged, but when i disconnect from mains MBP won't start

    As soon as i remove mains cable from MBP the laptop just crashes ... no juice ... even though it says battery is fully charged. As soon as i replace cable, it reboots ... i need this laptop to work on battery !!

    Try resetting the SMC.  If that doesn't work, I would get the machine to Apple for service ASAP.

  • Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11.  Just installed Photoshop CS6 and want to open images directly from iPhoto.    Before I installed PS I was not able to edit photos in iPhoto 11.  Nothing

    Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
    Using OSX10.8.2 and iPhoto 11.  Just installed Photoshop CS6 and want to open
    images directly from iPhoto.    Before I installed PS I was not able to edit photos
    in iPhoto 11.  Nothing happens when I click on ‘edit‘ it is blank. 
    And now it will not work using Photoshop CS6 either.
    From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6  to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
    When I select a photo in iPhoto and click the Edit button - nothing happens.
    Please advise. Glenys

    This may be of help to you:
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?

    Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?
    IPads and iPod Touches don't seem to have the same media copying restriction that my iPhone has. My main computer is at home. I have music at home and at work and sometimes I like to add it to my iPhone from work. I can do this no problem using my iPad or my iPod touch, but when it comes to my iPhone, I can only copy music to it from my main computer.
    Why would the iPhone have this restriction but not the other two devices?
    ps. Where's my "add currently playing song to playlist" button? I can't even find a third-party music app with this feature.

    Because...!
    I've no idea why either.
    Although it isn't normally possible to sync an iPod/iPad/iPhone with two computers (or manually manage an iPhone from more than one) it can be achieved if all computers have copies of the self same library. See Re: how do i sync on a second laptop without the data on my iPhone 5 being erased?
    tt2

  • I can't update/downloads an app from app store by using by iphone 4s. The icon will change to blank keep waiting, this problem was trouble me for 1 week. pls help me.I try all the method (reset/change date setting)no help my network is ok.

    I can not update/download an app from app store by using my iphone 4s. I try every method by re-setting date/time and reboot the phone etc.NO Help.
    The icon will change to blank keep waiting & can not go in & use in. Anyone have solution for this. pls help me...tks

    .local indicates local activity by the computer host Williams-macbook-pro.local=hostname@domain . The UID of 501 is the standard UID of a local computer administrator.
    Copy and paste this little script in your terminal:
    if [ "SSH_CONNECTION ]; then
         echo I am remote
    else
         echo I am local
    fi
    A return of "i am local" ensures there is no remote connection to your machine (through SSH).
    In the future, to avoid remote entry, I would recommend not posting your IP address though.

  • IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  Please help

    IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  I did restore the iPad about 8 times during the past 2 weeks.  Just completed another restore.  iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready.  That was 30 minutes ago.  iPad still won't start.  I am looking down the barrel of yet another fruitless restore.  What a crap product.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • I just updated and synced my phone and now all of my music and apps are missing from my phone and my computer! *** do I do?, I just updated and synced my phone and now all of my music and apps are missing from my phone and my computer! *** do I do?

    now all of my music and apps are missing from my phone and my computer! *** do I do?, I just updated and synced my phone and now all of my music and apps are missing from my phone and my computer! *** do I do?

    i had the same fright
    The update takes a LONG time... but with the new system, you can keep using your phone during the update, so it doesnt FEEL like it is updating...
    you have probably interrupted the update, just like I did
    plug your phone in... "continue the update" or hit the sync button to psh it in... and leave it there
    unless you have enabled sync over wifi (which still only works when you are plugged in)
    just be patient... and there shouldbe a flashing "synching" symbol at the top of your phone screen

  • 7th gen Nano only works when plugged in, turns off when  unplugged... battery is fully charged.

    7th gen Nano only works when plugged into computer, as soon as I unplug it shuts off (it was ejected from iTunes). Battery is fully charged.  Have already done a restore in iTunes and checked for updated software. 

    Hello there, DizDude.
    The following Knowledge Base article offers up some good recommendations for troubleshooting battery issues with the 7th generation iPod Nano:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Particularly this section:
    Battery life appears short
    Learn how to conserve battery life.
    Ensure that the latest software is installed on the iPod.
    When charging, use the cable that came with iPod nano (7th generation) and leave the device connected until it is fully charged.
    Note: If you are charging using your computer, don't connect iPod nano (7th generation) to your keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPod nano (7th generation) is connected to a computer that's not turned on or is in sleep or standby mode, the iPod nano (7th generation) battery may drain.
    When you are done using the iPod nano, verify that:
    The Radio application is off (tap the button)
    Music is paused (tap the button in the iPod application or disconnect the earphones)
    There is no active Pedometer session (tap the Stop button in the Fitness application)
    Dimming the screen is another way to extend battery life on iPod nano. Go to Settings > General > Brightness and restore the brightness to the default, or drag the slider to the left to lower the default screen brightness.
    Playing tracks with EQ requires your iPod processor to consume more energy than playing tracks without EQ, because the EQ information is not encoded in the song. To prolong battery life, turn EQ off if you don't use it. Go to Settings > Music > EQ and select Off from the list. Note, however, that if you've added EQ to tracks in iTunes, you'll need to set EQ to Flat to have the effect of Off, because iPod keeps your iTunes settings intact.
    Try restoring iPod nano (7th generation) by connecting it to iTunes and clicking Restore.
    Test the battery life.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Is it advisable to use your i Pad plugged into an electrical outlet rather than the Battery in use?

    Is it advisable to use your iPad plugged into and electrical outlet rather than using the battery all the time?

    I use my iPad while it is plugged in and I use it on battery power as well.
    I use my iPad all day long at work on battery power and then come home and plug it to recharge. Typically I will use it the rest of the night while its plugged in. When the battery is fully charged, the charging process stops and you can continue to use it while it is plugged in and it will not overcharge.
    It will not hurt to use it while it is plugged in, but the beauty of having a better powered device is that it is mobile and you don't have to plug it in to be able to use it virtually all day long.

  • Downloaded apps using my iphone, now I want to sync my phone on my computer, but don't want to lose the apps that I've downloaded onmy phone Help!

    Downloaded apps using my iphone, now I want to sync my phone on my computer, but don't want to lose the apps that I've downloaded on my phone Help!

    Connect the phone to your computer, but do not sync. Make sure iTunes is authorized to the same account that you bought the apps with. Then select "Transfer Purchases" from the iTunes File menu. Once this finishes the apps will be on your computer, so you can sync safely.

  • Leave iPod plugged into usb on PC ?

    Hi, this is my first iPod video, I have the new 30GB.
    Anyway, do I just leave it plugged into the computer all the time when not in use? Even when itunes is not on the ipod flashes the "Do not disconnect" and the backlight stays on.
    Is that ok?
    Should i ejected it when not in use?
    thanks in advance for the help.

    Yes, there should be no harm done to your iPod leaving it plugged in all the time. I would though, let the battery discharge once and a while.
    Hope this helps

  • I cannot authorize my new computer in iTunes because I hit the 5 device limit. However, I cannot deauthorize the old one because it's gone. I also cannot use the deauthorize all computers button because I did last year when I was replacing computers. Is t

    I cannot authorize my new computer in iTunes because I hit the 5 device limit. However, I cannot deauthorize the old one because it's gone. I also cannot use the deauthorize all computers button because I did last year when I was replacing computers. Is there any other way of deauthorizing computers that no longer exist?

    harishassan16 wrote:
    ... Is there any other way of deauthorizing computers that no longer exist?
    If you no longer have, or access to, the computer(s) you want to deauthorise,
    Log in to iTunes,  go to "view your account info" on the itunes store, deauthorise all five,
    (Please Note: this can only be done Once every 12 months)
    Then re-authorize your current Computer(s) one at a time..
    Authorise / Deauthorise About
    http://support.apple.com/kb/HT1420
    harishassan16 wrote:
    ... I also cannot use the deauthorize all computers button because I did last year ...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Count the number of days in the selected range using Customer exit

    Hi Experts,
    we have requirment where user is asking to add a column to report, which will have 'count of days for which key figure is having values' for each of the months and the Header would be 'Day Count'
    Please let me know if its possible using Customer exit?

    Hi,
    In our report we have two characteristics site no. and product and we have 6 key figures of type quantity and Input for the report is Fiscal year/period
    So in the report Key figures are populated with values for respective site no. and product combination
    Now the user wants new column in report which will have header u2018Day countu2019 and it should Simply count the number of days in the selected range that have a volume different than 0 for key figure
    Please let me know if more details are required

  • My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    Take it back to the Apple Store for repair since it's still in warranty.

  • Ever since I have updated to the 7.0.3, my battery will drain by noon with little to no use...it would last all day on the previous software version.  What is happening?

    Since I updated to 7.0.3 on my iphone 5, the battery drains by noon with little to no use. the battery would last all day before the update.  Help.  Thnx.

    I noticed this too after I did the 7.0.3 update. What's going on, Apple? It's pretty frustrating.

Maybe you are looking for

  • Outlook integration

    I have just installed Adobe Reader 10.1.3. For some reason the Reader is not working with my Outlook or My Documents. Is there something I must do to integrate? I can preview the files, but cannot open them.

  • Use resourceBundle properties file from KM

    Hi, I have a properties file called com.mycomp.apps.phonebook.properties in the KM Content of the portal in KM Content => root => mycomp => apps => phonebook => customizing Now I'm developing a new LinkCommand service for the UserDetails. http://help

  • Adding audio to slideshows using Elements 11 and itunes.

    Upgraded to Elements 11 from Elements 9 Running Windows 7 I am doing a slideshow and would like to add audio from my itunes library.  When I click to add audio and browse my itunes library, nothing shows after I click on the album. In an older versio

  • IPod video 30gb Freezing COMPUTER?

    Everytime I plug my ipod video in the computer recognizes it like its connected and then just freezes up my whole computer. I don't get what is going on. I have all the new itunes and everything and am connecting ipod through USB port. Someone help m

  • I Cant start from system disk

    When trying to start from system disc 10.4.8 I get the following error- panic (cpu0 caller 0x002E54BC):unable to find driver for this platform:"Powermac8,1" Can anyone help?