I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

Similar Messages

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

Why can't I establish a VPN connection using my iPhone 4's personal hotspot?

Hello everybody,
I want to access our company's network with my Mac Book Pro using my iPhone 4's 3G connection, but unfortunately it simply won't work. Here is what I can do:
- I can establish a VPN connection from my MacBook Pro using my home (or some other) WiFi and access the company network.
- I can establish a VPN connection on my iPhone 4 using 3G and access the company network on my iPhone 4.
- I can use my iPhone 4's personal hotspot (sharing its 3G connection) with my MacBook Pro and surf the Web.
what I can't do is:
- establish a VPN connection on my MacBook Pro when connected to the internet via the iPhone's personal hotspot. (connection times out)
- access the company's network on my MacBook Pro using the personal hotspot, when the iPhone's VPN connection is ON.
The VPN is an encrypted PPTP connection, with username and password.
Is this a known issue, and, if so, is there any way to solve this?
Thanks in advance!
Cheers
Diego

what i forgot:
i'm connecting to the iPhone's hotspot using WiFi
and:
the answer provided here did not do the trick for me :/
https://discussions.apple.com/message/17729456#17729456

I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

As described above.
I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

You will have setup issues.. as the latest AC model requires a Mac or iOS device.. eventually apple will release a windows version of the utility.. and the current one does partly work but Apple seem in no hurry.
You can find a Mac or iPad equipped friend to do the setup.. once setup the Windows computer can use it.
BUTT you cannot access it from remote..
Not with windows. You need BTMM and iCloud account. AFAIK even with those you cannot reach the TC.
You can do it manually.. using a vpn. Buy a proper vpn router and use a vpn client on the windows computer.. the TC would be in bridge to the network..
Apple really did not make this for windows.. and SMB access is only provided on LAN access not WAN.

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

Print a file to printer wirelessly and without need to use CD drive to install driver?

I have a HP-P1006 printer in my conference room and sometimes my guest want to send print to my printer and I have to connect their laptop with USB cable to my printer and install printer driver thought CD Drive. I want to know if there is a way to print a file to printer wirelessly and without need to use CD drive to install driver? (I don't have a wireless network in my conference room)

Is it possible to automate Adobe Reader to load files, then set the staple property and location, then print them out? I've seen in .NET 3.0 that there is a Enumeration for Stapling in the System.Printing Namespace. I need to figure out how to automate the printing in adobe but right before it prints, have .NET assign the printer and whether it should be stapled or not.

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

My Time Capsule has stopped working after I tried to configure an extended wifi network

My Time Capsule was working fine until I tried to configure it with an extended bridge. Now either the amber light is solid or the solid amber comes on for awhile and then goes completely out.
The AirPort Utility says that there is no internet connection, the DNS settings are wrong, and that the disk need to be repaired. Using Disk Utility, the Time Capsule does not even show up so that I can repair it.
I am running OSX 10.7.5, and besides the Time Capsule I have a Vonage Motorola (VT2442-VD) for VOIP, which of course is not working because it was connected behind the Time Capsule.
I'm in Italy and cannot call Apple directly since I now do not have phone service.
Any suggestions how I can check/repair the Time Capsule, and then configure it properly to my satellite broadband?
Thanks for you help.

How old is the TC?? The LED should never go solid amber.. that indicates disk failure.
Or completely out.. that indicates power supply failure.
As a note you cannot extend wireless to a non apple wireless router... you can only plug in by ethernet and use the TC to create a wireless network.. this can have the same name as the main router,, same SSID in other words and same security but set to different channel..

Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks.

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

Would using a Apple Time Capsules be easier to use as you can use the Airport Utility to set everything up? Would using encryption affect the speed / durability / life span of the drive in a computer or Time Capsule?

Would using a Apple Time Capsules be easier to use as you can use the Airport Utility to set everything up?
OR would there be better programs out there that would do more than Airport Utility on a non Apple drive?
Would using encryption affect the speed / durability / life span of the drive / Fusion drive in a computer or Time Capsule?

1. Time Capsules are the easiest device to setup for Time Machine.
2. Sorry this is unclear. There are a huge number of routers available that have far superior controls than apple routers.. some support Time Machine.. most don't. They negate your question 1. in being difficult to setup. And alot of 3rd party devices that claim Time Machine compatibility are unreliable.
3. Encryption is irrelevant.

Is it possible to share one wifi with two time capsule which are both connected to the network via cable?

Hello Community,
this is my first contribute here so please do not expect a 100% question with all important information! I will do my very best!
Situation:
2 Time Capsule (one 1st generation, one 4th generation)
both connected wired to my network
Question:
Is it possible to create one unique wifi Network with both TC's ? So wireless Devices connect to one TC (which is best at this position) but both TC's route traffic over wired connection?
Understand what I mean?

Hi Bob,
just configured it, but my primary TC's is in orange blink state now!
Error Message is "Double-NAT"! If my understanding is right, than the Problem is that my Router and my primary TC's does NAT!
Do I have to deactivate DHCP and NAT on my router or is there another way to work around?
Thank you so much
Christoph

How can I find my printer's ip connected (ethernet cable) to a time capsule which is in network extending mode ?

I got a network printer connected to a Time Capsule which extends my wireless home network. But I can't manage to find out it's IP address nor i manage to find it on the network ! Am I doing something wrong ? Is there a way to tell Time Capsule which is the IP of the network printer ?
Hope somebody can help me out !

Most printers can print their status page.. on the status page is the current IP. I personally don't buy network printers that don't have a small LCD with enough menu to set things like IP address. And reveal the current IP.
Is the printer set to dhcp? If so it will get an IP from the TC.
Apple removed useful aspects of the old v5 utility which would give you a listing off all IP addresses passed out by the TC or connected to it.
You can however do a netstat scan from your computer.
In finder type in network utility into the search (apple have hidden it in a stupidly obscure location)
In network utility run a netstat scan which should pick up the printer.
One aspect of this, is that if the printer is in a deep sleep, power saving mode.. you may not pick it up.. certainly you should make sure the printer is awake and ready to run.. even if you need to reboot it.
There will be a problem if the printer is manually set to the wrong IP range.. then it won't come up at all. To fix that you will need to actually read the printer manual.. and find out how to reset it to its defaults and start again.

I have just bought an airport time capsule and im trying to install an airport utility. I tried the 6 version but it wd not load because it said might mac would not support. I then tried the 5.6.1. and it said it would not work with airport capsule.

I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
if anyone can help that would be great
CS J

You should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

Similar Messages

Maybe you are looking for