I would like two partitions of Mac OS X and one running Windows 7

I Would like to have three partitions, two os x and one Windows 7. Can I use BootCamp? What should I use to partition the drive and what are any other steps I will need to take.

You absolutely can triple boot. I have the following configuration running perfectly, no problems:
1) Snow Leopard
2) Lion
3) Windows 7 (Boot Camp)
Originally had Snow Leopard and Boot Camp. Used Disk Utility to shrink Snow Leopard partition, clicked the "+" to add a new partition and it placed it between SL and BC. It made the changes for the ability to boot into any of the three when holding option at startup. I did this by the way, to see if Lion was more stable in a clean install, which it definitely is. Also, for those who run (and need) PPC apps, this works nicely.
Good luck.
Jonathan
MBP 13, i5, 2.3, 8 GB, 500GB

Similar Messages

Two partitions of Mac OS extended and one BootCamp partition

Hi. I'm new to mac. Please help.
Is it possible to have two partitions of Mac OS Extended and the third used for BootCamp? This is very critical for me.

Hi Ovchar,
you can use the Terminal command 'Diskutil resize' described in this procedure to Triple Boot a Mac: http://wiki.onmac.net/index.php/TripleBoot_viaBootCamp
Look at the paragraph under 'Installing the Operating Systems'.
However, since you are about to repartition your complete HD, I strongly advise you to have a bootable backup/clone of your OSX on an external HD just in case something happens.
Regards
Stefan

I would like to partition an external hardrive that is formatted to windows?

I would like to partition an external hardrive that is formatted to windows (Windows NT Filesystem) but the '+' box is greyed out, can anyone help? I have existing data on it and i would like to partition it to use with time Machine.
Cheers,
Mike

Hi,
Cheers for that. Do you know of any way I can format without erasing data?

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this and how do I select which partition to start the PC?

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this? How do I select which partition to start the PC?

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this? How do I select which partition to start the PC?

I purchased a seagate 5T hard drive that I would like to partition and have time machine on one side and drag and drop on the other side. Is this possible, and if so how?

I purchased a Seagate 5T external harddrive which stated it was for both Mac and PC.
I want to partition the drive so I can have a partition for time machine and a partition for drag and drop.
My Mac book pro 17inch model has parallels. I would like a partition for time machine for the mac side and a partition for the PC side as well and a third partition for just saving work files so I don't clog up my laptop. IS this possible? DrMAV

yes it is possible using 'disk utility'. format the time machine backup as Mac OS Extended( journaled). The windows partition can use FAT32.

Hi, I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies. My goal is to have a unique source in my imac for my photos and movies. Thanks .

Hi,
I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies.
My goal is to have a unique source of photos and movies in my imac.
Thanks !
Nicolas

As to iPhoto
Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
For iMovie support please post in the iMovie forum
LN

HT4597 I can no longer access my mac mail in the Mail program - only on icloud. I would like to have both my aol account and mac account in one place like it was. Anything I can do?

I can no longer access my mac mail in the Mail program - only on icloud. I would like to have both my aol account and mac account in one place like it was. Anything I can do?

iCloud's mail server settings are different from MobileMe's. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
iCloud cannot access your AOL account (the MobileMe facility for checking external POP accounts does not exist in iCloud) - you will have to do this in the Mail application in the usual way. You could of course set up forwarding from your AOL account to iCloud (assuming they provide this facility) but you will not be able to reply using iCloud's SMTP server with anything other than the iCloud address as the 'From' address.

I would like to update my mac from 10.5.8 to v10.6.8. can you help me

i would like to update my mac from 10.5.8 to v10.6.8. can you help me

Depends on what Mac you have. If it is a PPC (G4 or G5) Mac then Leopard 10.5.8 is as far as you can go.
If it is an Intel Mac:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Maverick for everything but the dictation software. I'm a new pie to apple

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple

To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Is it possible for me to have CC on two computers at once with my current licensing? I would like to have it on my desktop and my laptop.

Is it possible for me to have CC on two computers at once with my current licensing? I would like to have it on my desktop and my laptop.

Each CC allows you to activate it two times, it can be on the same computer or different.
So you can install &a activate it on two computers but as End user license agreement you can not work on them simultaneously.
http://www.adobe.com/legal/licenses-terms.html
Creative Cloud Help | Creative Cloud / Common Questions
http://helpx.adobe.com/creative-cloud/faq.html
Regards
Rajshree

HT3131 I would like to darken my Mac Air screen, so I can use may external display and the keyboard on the notebook--it is possible on a PC-does it work on a Mac?

I would like to darken my Mac Air screen, so I can use may external display and the keyboard on the notebook--it is possible on a PC-does it work on a Mac?

Sure it's possible.
Go to System Preferences (under the Apple logo on the top left of the menu).
Choose "Display". There's a slider bar for the screen brightness. Adjust it and you're all set.

Would like to upgrade my Mac OS X

Would like to upgrade my Mac OS X 10.6.8 to hight spec for games that require minimum 10.7… can anyone advise how to do this? I'm completely hopeless at things like this and haven't got a clue where or how I'd start???? Thanks Any answers back or help would be great!!!

Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(126251)

HT1338 I would like to update the Mac software from OS X 10.5.8 to Os X10.6

I would like to update my Mac from OS X 10.5.8 to Mac Os X10.6

Purchase Snow Leopard from Apple's Online Store - $29.00.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

Hi. I am working on a Mac OSX 10.10.2 Yosemite. I'm working remotely with a woman who is using indesign CS8.2 I'm still on CS6.8 and can't open her files. I would like to upgrade to the latest version and I'd also like to know why these upgrades are not a

Hi. I am working on a Mac OSX 10.10.2 Yosemite. I'm working remotely with a woman who is using indesign CS8.2 I'm still on CS6.8 and can't open her files. I would like to upgrade to the latest version and I'd also like to know why these upgrades are not automatic as i pay a monthly subscription to the cloud. Thanks.

A Cloud subscription SHOULD always show you the most recent updates, so you may then choose to do the install
CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-and added step https://forums.adobe.com/thread/1529654
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-and a Java update https://forums.adobe.com/thread/1507936
-update breaks things https://forums.adobe.com/thread/1772260
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

I would like two partitions of Mac OS X and one running Windows 7

Similar Messages

Maybe you are looking for