I5 apps will not update after 8.1 install

Unable to get any app updates to run after 8.1 iOS install. Have tried using LTE or WiFi only, Reset Network Settings, power cycled device which is an i5. Any ideas? I have also tried updating one app at a time with same results....circle with dot in middle activates, but no activity from this point on.

Any restrictions set up for installing or removing apps in Settings/General/Restrictions?
Did you also check if you are still logged in with the correct Apple ID in Settings/iTunes and AppStore/AppleID?

Similar Messages

  • IPad Air Apps will not update after ios8.0.2

    I Now have 17 apps that will not update after I updated my iPad Air to 8.0.2. What gives?  Some apps are stuck in mid update, so i can't use them. My wifi works. I have restored my iPad twice using iTunes. I have plenty of empty storage. I have reset my iPad. I'm out of ideas.

    I have been having the same problem but was able to get around it by updating the apps in iTunes on my Mac then syncing my iPad to iTunes on my Mac. Certainly not an elegant solution but until Apple gets this fixed it is the only way I have found to get updated Apps.
    Tim

  • IPhoto will not update after Mountain Lion install

    Installed Mountain Lion last week. Running software update results show an update available for iPhoto but iPhoto will not update to the latest version using the APP store update interface.

    Have you bought it in App Store or in a disc? If you bought it in a disc, download iPhoto 9.3 and iPhoto 9.3.2. If it has been bought in App Store, delete and install iPhoto

  • TS1702 Since updating to new IOS 6 (3GS phone) apps will not update( hang up satin installing ) and will not delete(no x ) HELP!

    Has anyone else had this problem and found a solution?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings

  • HT2693 My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    First of all - you are running the proper iOS in order to use the latest version of Pages - correct? You need iOS 6 now.
    If so ....See if this helps. Maybe Pages will open after you try this.
    Quit the Pages app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ..... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that didn't help backup and send your files into iTunes with file sharing.
    You could lose all of your files if you delete and reinstall the app. That is precisely why you should backup your iPad and send your files into iTunes using files sharing on the iPad. Do you backup or use file sharing?
    Backup your iPad, send the files from the iPad into iTunes using file sharing and then delete the app and reinstall it.
    Start here ..... How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    iOS: About file sharing.
    http://support.apple.com/kb/HT4094

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • Apps will not open after ios5 install.  Any solutions?

    Apps will not open after ios5 install.  Any solutions?

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Apps will not update on iPhone 4

    My apps will not update on my phone.  I've turned my phone off and let it set and tried to update after and it didn't work.  I've tried backing up and syncing and it didnt work either.  I've tried to update the apps individually instead of all at once and I get a message such "name of the app is not available at this time" , but it updated on my iPad just fine.  I can't use my apps on my phone as it acts like they are currently updating.  It's been this way for three days.  Any ideas on how to correct or what caused it? 

    I had this problem, I had 12 apps that would just not update via cell data or wireless!!!
    To solve I just updated all the apps in itunes on my mac (or home pc) and then when i connected my iphone it just updated them the first time with the sync!!

  • Lync mobile app will not launch after upgrade to lollipop on HTC One (M8)

    Lync mobile app will not launch after upgrade to lollipop on HTC One (M8). Is this a known issue or is a fix available?

    Hi THGutz,
    Did you install the latest version of Lync for Android ?
    The current version of Lync for Android is
    5.5.3.8935.
    I don’t test it on M8, but on other Android 5.0 devices it works fine.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT204266 I have changed countries with my ipad..now apps will not update..says "acct is not valid for use in U.S. store. you must switch to the Canadian store " how to do this?

    apps will not update...says " account not in this store..account not valid for use in the U.S. must switch to Canadian store before purchasing"

    Change to Canadian App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

  • HT4623 apps will not update

    under the app store it shows I have updates to do.  When I hit install all and then my password the apps will not update. 

    I found a solution to the problem.  Connected iPhon to iMac.  Opened iTunes and clicked on my phone.  Then clicked on 'Apps'.  Found the apps not updating and deleted them.  Synced phone and all is now well.

  • Updated to IOS6 and now my apps will not update on the Ipad2.  I have to delete them and then re-install.  But I have several hundred apps and this is cumbersome.  Seems the new software is too buggy.  I am telling people not to update software yet.

    Updated to IOS6 and now my apps will not update on the Ipad2.  I have to delete them and then re-install.  But I have several hundred apps and this is cumbersome.  Seems the new software is too buggy.  I am telling people not to update software yet.

    Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

  • HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

    I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
    Thank you.

    Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
    Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
    Thanks again.
    John

Maybe you are looking for

  • Can't figure out how to change my email and password for the message board...

    I did password recovery earlier and ended up with some short (insecure) temporary password. I've wasted WAY too much time looking for a place to update my username and password, but I just can't find it. Solved! Go to Solution.

  • Cannot purchase records/"processing of credit card data not possible"

    Since last Tuesday I cannot buy records at iTunes store (Austria). Whenever I click the "purchase" button the systems sends back the message that "currently the processing of credit card data is not possible". That's interesting as I have been handli

  • PL/SQL's restriction?

    Hi, This is a syntax question. How do I define record-typed constants in a package? I need something like this: Type Color_Type is Record ( red number, green number, blue number COLOR_RED CONSTANT Color_Type := Color_Type(255, 0, 0); -- compile error

  • Spotlight stoped working after 3 days

    After installing and being happy with Mac OS X v10.5 Leopard 3 days later for no reason Spotlight just stopped working. I enter a search and I get no results back. As if my drive has nothing on it. I tried the preferences pane and didn't see any sett

  • Does BAPI_PO_CHANGE work for ME22?

    Hello, There is background program which is run at regular intervals, which changes the PO unit even when there is a GR created. So if I go to ME22n and change the order and  save , PO unit is getting converted automatically. This is due to backgroun