IAC operation failed error mac

I've been dealing with the accursed IAC operation failed error when saving edited photos - and apparently this is a common problem on Macs. I'm wondering if anyone has taken the free update to Yosemite yet and if so does the error continue with that OS? (I currently have PSE 11 & Mavericks.)

Had Elements 12.0. Upgraded to Yosemite. Had IAC operation failed error repeatedly. Tried upgrading to Elements 12.1 at Adobe recommendation. Upgrade failed repeatedly. Bought Elements 13.0. IAC operation failed error still here.
1. frustrated this error remains
2. peeved Adobe is never around when I need them, and they cast me to the "community". Help from the community is remarkably good, but I just gave Adobe $80 and their product doesn't work right - they owe me support, and now.

Similar Messages

IAC Operation Failed error

I have seen a few complaints about this problem but no solutions anywhere. Has Adobe ever weighed in on the topic? Does anyone know what's going on? I have at least 3 photos that seem to be forever stuck in edit mode as a result of the problem. It has happened with versions 10, 11 and 12 now.

Just tried to replicate this - it's a bit erratic. I've found that editing a bunch of things at once, then saving and closing them all by clicking on the x in the corner (in Expert mode, in Editor), and accepting all the defaults (name, resolution, one other) by quickly hitting return as the dialogs are presented, is most likely to trigger this problem. In this trial session, in which I closed 5 edited photos rapidly, Organizer appeared to be in the problem state, with the locked band present after the photos were closed in Editor, the edits not shown, and the wait cursor (spinning ball on Mac) lasting a long time. But, in this trial, the condition eventually resolved, the edits were saved, the photos released and no IAC error posted. In this trial, and as well as I can recollect from cases where the IAC error was thrown, no - the photos were not remaining open in Editor when the error was thrown. It appears that there's something of a race condition in communication between the two apps (Organizer, Editor).
So, I did not replicate the problem this time. And I've changed my behavior to 1) finish saving changes before attempting to close, 2) edit smaller batches (I'd been editing up to ~20), and I've seen the error a good deal less - but it is not entirely gone. If I catch a good example, I'll post again. But, this is what I can see so far.

"Package operation failed" error when trying to create ICAP file

Why is this happening? I create a new assignment and then select "Package for Incopy" and I get the error message "Package operation failed". What am I doing wrong? For draft 1 of my Mac Indesign CS5 file I created a new "assignment 1" and ICAP file and emailed to my PC Incopy CS4 client. They sent IDAP file back and all was well. I need to send draft 2 to client the same way but why am I unable to create a new ICAP file? I can't even replace the ICAP file from draft 1. Please help. Thank you! Lynn

Did you ever get it to work?
We are having the same problem.
Indesign CS4 on Mac
InCopy CS5 on PC
Though we also get an odd message when we reopen the InCopy doc, that there is another version created in 1999 which we might want to use.

6750 Mural "Operation Failed" error opening large ...

Some friends of mine insist in sending multimedia messages with large picture attachments (in the 500kb range) to me. When these messages get to my phone, I can't open them. I select the message in the inbox and get a popup message saying "Operation failed". This happens even after power cycles and phone resets. The smaller the attachment, the better my chances of opening the message. Under 200kb - never a problem. Over 200kb - increasing chance of "Operation failed".
My workaround is to forward the message to my email address, which is not very convenient (sending the message is sloooooooowwwwwww, and then it takes forever to get to the destination ... I'm looking at you, AT&T!)
Anybody else see this problem? And is there a better workaround?
fyi This is with a recent firmware rev (within the past week)

I believe the limit is 600K in size for your network,however some devices have a hardware limit of 300K. When messages are over the size limit they are just rejected
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Outlook 2010: Getting a "the operation failed" error when accepting invite from inbox

One of the people I support is using Win 7 and Office 2010. When accepting an invite in his inbox, he gets "This Operation Failed", however this behaviour only occurs for internal staff who email him through Exchange. I emailed him from an external email
address and he was able to accept the invite and have it appear in his calendar correctly.
We are running Exchange 2007 and his client is Office 2010.
I'm going to try the following to try to get to the bottom of things
1. Check account settings
2. Disable antivirus
3. Try non cached mode
4. Check Delegate access?
5. Check event logs
6. Office updates / service packs
7. Repair job of Office 2010
8. Reinstall Office 2010 or install 2007
Does anyone have any other suggestions?

Glad your issue has been resolved.
Thanks for your sharing.
Evan Liu
TechNet Subscriber Supportin forum
If you have any feedback on our support, please [email protected]
Evan Liu
TechNet Community Support

Re:Assignment operation failes error

when i execute an Assignment individually depending on some criteria it is working for one record.............
But when i try to do the same for multiple records at a time it is throwing the above mentioned error.
Can anyone clear me this.........cant Assignment run on multiple records at a time.

Hi Shifali,
You want to check, if for a given main table rec,a particular rec has account group field value as XXX then it should be replaced by Static.
Is this is the case then instead of validating the record,validate the rec field only.
If(Account group.Code=XXX,STATIC,Account group.Code)
Hope It Helped
Thanks & Regards
Simona Pinto

HealthCheck operation fails on mcsmgr.log and Error sending DAV request. HTTP code 600, status on Data transferservice.log

Hi,
I have a CAS, primary site and a DP. On Site properties I have set client communication : HTTP or HTTPS and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied. I checked the log 'datatransferservice.log' and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
Regards

I have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet. Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014 8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014 8:22:19 ===

Edit locally giving error "Operation Failed"

while edit document locally in KM trough the command "edit locally". After clicking on "edit locally"a digitalized signed applet pops up with run and cancel button.(here applet is being set instead of Active x).I clicked cancelled. It shows the error "operation failed".Doesn't allow me even next time. Showing
How to solve the problems that even though I click the cancel, the next time same applet should popped up

Hello,
i me having the same Issue when i try to edit KM File locally (Excel) -> Operation Failed Error.
please advice how did u solved the Issue?
Thanks and Regards,
Nazih

Why do I get Operation Failed. [Error Code: -17500]?

After test Stand has finished a test run and has generated a HTML file. I get the following Error Operation Failed [Error Code -17500]. The report is generated but not displayed in TestStand.

Hi,
Is this in the Operator Interface or the Sequence Editor, and what version of TestStand are you using.
Regards
Ray Farmer
Regards
Ray Farmer

CSA 6.0 event log error - Operation Failed

CSA 6.0.0.209, Windows 2003 server
When viewing Event Log or any Group events, receive Operation Failed error. CSAMCLOG shows MS SQL timeout errors during these operations. However, I am able to view Host events and general events using Event Monitor.
--Russell Manaois

You are possibly encountering bug CSCtg78612. This occurs when the CSA MC is updated from an earlier version of 6.0 to 6.0.2 and managed agents have not yet been upgraded. You should be able to address the issue by scheduling agent upgrades for the affected hosts.
You can view the full bug details here:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg78612
Scott

Editing Contacts via keypad causes OPERATION FAILE...

Initially I entered info for approximately 60 contacts into my new Nokia 6131 phone memory using the phone keypad. Everything worked fine. Then I discovered the CONTACTS application in Nokia PC Suite software was a lot easier to use for data input, so I started to use that application via my PC to edit my contacts.
Now, when I try to edit a contact using the phone keypad, I regularly get the OPERATION FAILED error, which prevents saving the revised contact information. This is EXTREMELY frustrating, because there is no indication of a cause for the error. 95 percent of the memory in my phone is free, so problem is not related to memory capacity. I can delete certain parts of contact info, like an extra phone number, or an image, and that seems to work without generating the error, but you cannot add or modify anything. I can only reliably edit my contacts using PC suite and then synchronizing the changes. I have updated PC suite and the phone firmware to the latest available versions, but that didn't help. DOES anyone know what causes this OPERATION FAILED error?

Thank you miksu,
Yes, my phone UI is idle when I try to browse/edit contacts. Today, I thought I'd try resetting factory settings and see if that cleared the problem. So I backed up the phone, reset factory settings and tried to restore from the backup - disaster, it would not restore contacts at all and I was left with a phone minus 400+ contacts! I tried backups that I had previously restored successfully from - still no go.
So I rebuild the contacts from my Outlook, compared it manually with what I had on my old 6230 (fortunately I still have the phone with contacts intact), made updates manually and all is now OK. The OPERATION FAILED does not appear on the phone and I can browse/edit my contacts on the PC.
Although everything is fine now, I will use PC Suite with caution. Perhaps my understanding of the product is not good enough, but I am not keen on risking it.
Sharad

PC Suite installs ok, but "operation failed" on si...

PC Suite installed fine, no error messages. Previously, I had no troubles.
A day or two ago, the version of Nokia Software Updater was itself updated, to 1.4.98EN
Now, whenever I attempt to install a sis or sisx file, from Windows, I get an "operation failed" error, from Nokia Application Installer. This happens whether or not I have PC Suite configured to install apps to either the phone or to its memory card.
Also, When I connect my phone to my PC, I can no longer browse either the phone's memory card, from Windows. Windows Explorer can detect the presence of the memory card but, when I select the memory card, Nokia Phone Browser gives me the error "The operation could not be completed".
However, Nokia Phone Browser can access the phone's memory, just fine.
Has anyone else encoutered this, particularly after Nokia's updater was updated? Is there a solution?
Windows Vistax64 Ultimate edition SP2 v.113
PC Suite version 7.1.18.0
Cable connection
Nokia Software Updater ver 1.4.98EN

Good catch, cricfancy. I missed the PC Connectivity solution. This time, I sorted the installed applications by Publisher and found all that were from Nokia, including the PC Connectivity Solution.
I uninstalled all of these:
Nokia Software Updater
Nokia Photos
Nokia PC Suite
Nokia Flashing Cable Driver
Nokia Connectivity Cable Driver
PC Connectivity solution
Rebooted PC
Ran CCleaner Registry Cleaner
Rebooted PC
Reinstalled Nokia PC Suite 7.1.18.0
Nokia PC Suite requested direct cable connection to the E71 phone
During the Nokia PC Suite installation, Windows Media Player spiked an error (I didn't realize any portion of WMP was even running). That's been happing a lot, recently.
Windows installed the connectivity drivers and Nokia PC Suite indicates the phone is connected.
PC requested a reboot.
All the USB drivers Windows was unable to install, the last time around, are now installed correctly.
And the result is:
I still cannot browse the phone's memory card, from Vista. Phone's memory is visible to the PC, just fine. Interestingly, the Settings for Nokia PC Suite (destinations for music, video, installs, etc.) defaulted to folders on the phone's memory card. When I drag and drop media, on to Nokia PC Suite's Windows desktop app, the files transfer just fine to the phone's memory card. But, this does not work for text or MS Office files (Excel, Word, etc.). Those spike a "unable to copy the file on the phone" message, from Nokia PC Suite.
It appears, for the time being, that my only alternative is the use Mass Storage as a way to access the phone's memory card, from Windows Explorer, in order to transfer data files that aren't media.
And, "operation failed" is still what comes up, from Windows, when I attempt to install .sis files with a double-click in WIndows Explorer.The workaround, though, is to drag-and-drop the .sis file, from Windows Explorer, on to the Nokia PC Suite desktop app.I can live with that.
I'm going to consider this problem to be more-or-less closed. I mean, I understand the workarounds needed.

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Error on nexus 7k series " operation failed.the fabric is already locked"

getting following error on nexus 7k series switch: error is " operation failed.the fabric is already locked", while removing ntp commands (no ntp server 10.101.1.1) from switch. Please help.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

IAC operation failed error mac

Similar Messages

Maybe you are looking for