Iam using Iphone4,my problem is while imake a call or when ia attend a incoming call,the screen doesnt lock,while i kept in my ear to attend a call it automatically gets inside keypad or it on hold tab this makes me uncomfortable pls give a solution

This sometimes happens if you have a case or screen protector on the phone. IF you have one of these remove it and see if it makes any difference

Similar Messages

My phone dials and hangs up on people while talking. i need the screen to lock while using it

my phone dials numbers and trys to face time while using phone.i want screen to lock while on phone. it never used to do this until i had screen replaced.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?

I just upgraded to the iPhone 4. When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to. How can I get the screen to lock while I'm talking? It's driving me NUTS.

The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

HT201401 use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new ve

I use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new version IOS6.
had anyone this problems?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

iPhone, iPad, or iPod touch not appearing in iTunes

HT4847 Iam Using IPHONE4 my storage capacity is over so i purchased 10GB additional storage through online bt i cant use it until nw plz guide me how to utilized that storage in my iphone4

Iam Using IPHONE4 my storage capacity is over so i purchased 10GB additional storage through online bt i cant use it until nw plz guide me how to utilized that storage in my iphone4

You can't buy additional storage for your iPhone.
You must've purchased additional storage for iCloud.
iCloud storage does not increase the internal storage capacity of your iPhone.
If you want to free up some internal storage on your phone, you will have to remove apps, music, books or movies to make room.

I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer.

I imported photos from an old iPhoto (2001) to photo library and can now see them as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

I imported photos from an old iPhoto (2001) to photo library and can now see them only as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

Did you import the old iPhoto library into the new one? That's not what you want to do because you will import all of the original, modified and thumbnail files as if they were original files. Lots of duplicates and useless small photos.
Do you have a backup copy of the library that you imported into to? If you do then bring it in and then use iPhoto Library Manager to merge the two libraries into a new, 3rd library.
If you don't then you'll have to try to fix the current one and then cull out the duplicates and small useless photos as follows: make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If this doesn't fix the problem you'll have to start over from scratch and create a new library from the files inside the Originals folder of your current library. But first you should cull out the small photos that would be the thumbnails from the 2001 library.
Move the Originals folder to the Desktop, open and do a search for Kind=photo, File size is less than 10 KB. That should find all of the thumbnail files which you can then drag to the Trash. You might have to make that less than 50 KB. Then Import the remaining photos into a new iPhoto library.
OT

Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...

After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...

Hello Wexxwoxx,
Welcome to the Apple Support Communities!
I understand that after you updated to iOS 8.2, while typing a message your iPhone seems to be locking itself. In this situation, there are a couple of different troubleshooting steps that I would recommend.
First, I would suggest closing the Messages application completely by using the instructions in the attached article below.
Force an app to close in iOS - Apple Support
After the Messages app is closed, I would recommend resetting your iPhone using the instructions in the next attached article. After the reset, open Messages fresh and attempt to use as you normally would.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a great day,
Joe

Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

An unknown error occurred (0x80092013) what the **** is going on from last six month i am unable to access i tune store?pls give me solution which should help me to shortout this problem as soon as possible

An unknown error occurred (0x80092013) what the **** is going on from last six month i am unable to access i tune store?pls give me solution which should help me to shortout this problem as soon as possible. i have not expected this from apple

I have been trying for months to put iTunes on my laptop and kept getting installation errors in Windows 7. I gave up and just installed iTunes on my PC running XP.
Now I have to install Quicktime on the laptop and once again I get an installation error 0x800736FD.
All windows updates are fine, none failed.
I have removed all apple software from my laptop using CCleaner, common files and folders. Tried reinstalling and still the same error.
Could you offer any advice on how to get both quicktime and then iTunes working??
Thank you in advance

How Do I stop the phone from locking while the navigation program is running.

I have a Blackberry 9630 V4.7.1.40. The phone is on an enterprise server network through work. The phone is set to password lock after a couple of min. of non-use. When I have the Sprint Navigation program running, the phone locks after a few min and loses my satellite. I then have to type in a password to unlock it and I then get the signal back.
I called Sprint and they said to press a button after every couple of min. to keep the phone "active". That sounds a little fishy to me!
How do I keep the phone from locking while the Nav. Application is running?
Thank you for your help
Bill

brauscher wrote:
press a button after every couple of min. to keep the phone "active". That sounds a little fishy to me!
Agreed, that is the simplest thing to do... probably much easier than talking your IT guys into raising your timeout.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3274 Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

- First try clciking the Home button one and try again.
- Next reset the iPod. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then restore from backup
- Restore to factory defaults/new iPod

Iam using Iphone4,my problem is while imake a call or when ia attend a incoming call,the screen doesnt lock,while i kept in my ear to attend a call it automatically gets inside keypad or it on hold tab this makes me uncomfortable pls give a solution

Similar Messages

Maybe you are looking for