Ibook will not Boot - goes to DOS, error message inside
Hi folks,
The old ibook (late 2004 model) is slowing down more and more, and yesterday refused to boot after crashing.
I left it booting on its blue screen for a while and it eventually went to a black dos screen with the following message:
SystemStarter[47]: The following StartUpItems failed to properly start:
/System/Library/StartUpItems/PrintingServices
- execution of Startup script failed
Now i'm assuming the problem is with the start up script, so I've looked around and done a few things suggested.
For example:
1. Reset the PMU ~ Shift - Control - Option - Power, waited for 5 secs, then rebooted, same problem.
2. Ran single user commands as detailed here http://missionitgroup.com/blog/?p=1490
Tried this twice to make sure, same thing happened. When checking the disk for errors (/sbin/fsck -fy) it would not find any volumes.
Also it would not run repairPermissions, it just kept giving me the options under diskutil, but not running the repair (Im assuming this may be due to it not being able to find any volumes)
3. Someone has suggested running the Mac from its original startup OS X DVD.
The problem is that there is a DVD (movie) already in the drive and pressing eject does not eject it.
4. I put the ibook into Firewire mode with it attached to my iMac. The iMac could see the DVD that was in the ibook drive but could not see the ibooks harddrive.
sooooo!!!!! a bit lost as where to go from here, any help would be greatly appreciated!?
Drewdrops,
That is a link for a SATA (Serial ATA) drive) which will not work. You need a PATA or Parallel ATA drive, also called ATA, Ultra ATA or IDE drive. The drive in the link you sent is also a 3.5" drive. You will need a 2.5" notebook drive for your iBook.
After you get the new HD installed, you will have to boot from your Leopard install DVD, go to Disk Utilities again, select the drive in the list of volumes and click on the 'partition' button. select 1 partition (unless you would like more than one volume), make sure that "Mac OS Extended (Journelled)" is the format selected and then click 'partition'. You can then quit Disk Utility, and continue the installation. If you click on the 'options' button in the first install pane, you will see the button, pre-selected, that says 'installs OS X for the first time'. That is the correct choice.
After the install is complete, you'll get the welcome window, set up your account, and get going on your iBook. Immediately go to software update in System Preferences and begin installing the myriad of updates. After each install and restart, return to software update again and again untill it finally says that "you are up to date". This entire process can take hours, but stick with it. One more thing that is very important.... After you are finished with updates, open Disc Utility in the Utilities folder that is within your Applications folder and drag that icon down to the dock. Open it, select your HD volume to the left (the upper one with numbers, not the sub-volume) and then click "Repair Disk Permissions". Apple recommends doing this after each time you install updates and generally at least once a month after that. The instructor in an OS X class that I once took, said that you should repair disk permissions every week.
To me, all of you symptoms would point to a failed hard drive and a replacement would most likely take care of the problem. Are there ever any guarantees, though?
Is there an Apple Store close to your location? You could make an appointment at their "Genius Bar" for a free check-up. They will look at your iBook, tell you what is wrong and how much it will cost to repair it at their facility. You are not required to have it repaired there. It's just s service they offer. Look at the bottom of the Apple Store or Support page. I believe there is information about making an appointment.
Let me know how it goes.
Randy
Similar Messages
-
Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.
Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition. -
My ipod touch (model A1213) is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed.
2.2.1 is not the latest available for any ipod touch.
Is yours the original ipod touch?
If so then:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
Creative Cloud will not download. I get error message 302 immediately.
Creative Cloud (Photographers version) will not download. I get error message 302 right away.
Hi,
Please refer to the thread below:
install error on Mac "could not create ~/library/application support/adobe/coresync"
Regards,
Sheena -
I am using a 4s with ios 7.1.2 and recently any app I am trying to use or load will not work and I get error message the app is not compatible with my iPhone; however, the requirements in every case indicate they are compatible with 4s and ios 6 and greater. Honestly, seems like I have one problem after the other with the iPhone
Thanks, unfortunately that is another problem that is occurring, when I go to Update Software I get the message that software is up to date, with version being 7.1.2, I have tried to update through itunes, wifi, etc, and it indicates the software is up to date.
-
i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???
Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day! -
I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?
I get the same kind of thing..
I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
here is the code:
Process: Soundtrack Pro [1705]
Path: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier: com.apple.soundtrackpro
Version: 3.0.1 (960)
Build Info: SoundtrackProProject-9600000~277
Code Type: X86 (Native)
Parent Process: launchd [140]
Date/Time: 2011-10-18 13:12:05.201 +0200
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 195725 sec
Crashes Since Last Report: 3
Per-App Crashes Since Last Report: 2
Anonymous UUID: 23728D81-590B-4C3A-8C67-1709945CD132
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
Binary Images:
0x1000 - 0x7f7ff8 com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
0x947000 - 0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
0x952000 - 0x98ffff com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x9a9000 - 0x9f5ffb com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0xa18000 - 0xc3eff7 com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0xd49000 - 0xd49fff com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
0xd4d000 - 0xd54fff com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
0xd5e000 - 0xd6dfff com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
0xd81000 - 0xd83fff com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xd89000 - 0xe49fff com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
0x11000000 - 0x1102afeb com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
0x8fe88000 - 0x8feba9c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
0x90840000 - 0x90992fff com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x90993000 - 0x90993ff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91e60000 - 0x92036fe3 com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x924a8000 - 0x92509ffb com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x93281000 - 0x9328ffff com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93331000 - 0x93331fff com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x93332000 - 0x93493ffb com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94326000 - 0x9436dfff com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x94420000 - 0x946a5fe3 com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x97dd0000 - 0x98082ff7 com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x99d12000 - 0x99d76fff com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x9adc8000 - 0x9adc8fff com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9aef1000 - 0x9aef1fff com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b2ec000 - 0x9b2ecfff com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: USB to Serial-ATA bridge, 0x04fc (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: UM-2G, 0x0582 (Roland Corporation), 0x0106, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
thanks everyone
e -
my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?
No need to Double Post... It is considered impolite.
https://discussions.apple.com/message/20652820#20652820 -
Xcel documents that onced opened will not and i get an error message
Xcel documents that once opened will not and i get an error message "the file may be read only or you may be trying to access a read only application. Or, the server the document is stored on may not be responding"
Without at least knowing the version of MS Office you're using it may be a little difficult. One thing you can check are the permissions of the files, select a file in Finder then select Command I (that's I as in Ivan) and look at the permissions. If necessary change the permissions.
BTW if you need it there is a Office for Mac Product Forums you can post on too. -
can anyone help? am unable to upload photos into iphoto. have been doing it for a few years but will not allow it anymore. no error message comes up. has anyone had a similar experience?
What version of iPhoto? How are you trying?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Ibook will not boot PLEASE HELP!!!!
Hi,
First the ibook booted then would come up with the kernel error: square box with "you need to restart your computer. Hold down the power button for several seconds or press the restart button......
I then booted to single user mode and ran fsck -y which eventually came up with the all clear "The volume Macintosh HD appears to be OK"
I then restarted the system which booted to the blue screen with some quirky graphics towards the top. It will now not boot into single user mode, just black screen or multi-coloured stripy screen. When booting from the CD drive the sceen is just blue or black.
Okay, I have connected the ibook via fire wire to a powerbook, and re-booted the ibook in terminal mode which brings up the fire wire connect symbol on screen.
After a while the system stalls showing part of the symbol and the connection is frozen. I have tried to re-install tiger using the powerbook to initiate as the ibook will not. However, it freezes at 50% of install.
I changed the ram to iliminate a ram failure, however... still the same.
While I was in terminal mode I erased the disk using the disk utility from the PB and then ran the install again... still froze.
This looks more serious than I thought. I'm now thinking that it could be the hard drive or worse. I have tried to use the apple support phone # and it does not seem to work, 1800 275 2273.
I'm having some real bad luck here. Any ideas?I ran the apple hard ware test disc. The quick test found no errors. The extended test freezes up completely. Now I'm really stumed. The logic board came up with know errors.
When the system froze on the extended test. I falsed a re-boot. However the screen went black so I could not run the test again. It seems like a time thing... the ibook can only run for a short period before it freezes. Then it has to shut down for a while before it can run again -
Disk utility has found problems. Specifically it returned this info:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I have tried to restart the iBook using the original restore CD, the original install CD, the Leopard CD, the Tiger CD and Norton Utilities CD. The computer will read the discs but will not boot from them so I can't find a way to repair the effected volume.
Tried Parameter Ram but feel there are deeper problems; just don't know how to get to them.knateb, Welcome to the discussion area!
Just for the record, your iBook shipped with a version of OS X somewhere between OS 10.4.2 and OS 10.4.4. Therefore it will never boot from a retail Tiger (10.4) disc.
Have you tried resetting the PRAM?
Have you tried resetting the open firmware? The procedure is
Start up into Open Firmware by pressing and holding the Command-Option-O-F key combination during startup.
At the Open Firmware prompt, type: reset-nvram
Press Return.
At the Open Firmware prompt, type: reset-all
Press Return. -
My ibook G4 will not boot up it satops at a blank white screen... I've tried resetting the PMU by using the shift-ctrl-option-power and restarting but no luck. Any ideas??
ThanksHi, and welcome to Apple Discussions.
If the iBook is on, shut it off.
Push the power button, and as the startup chime is ending, hold down the x key. This should allow you to boot into OS X.
If this doesn't work, check out these links to articles on recovering from the flashing question mark:
http://docs.info.apple.com/article.html?artnum=58042
http://www.bombich.com/mactips/openfirmware.html -
Does not open.
Instead Microsoft error message "encounters a problem and needs to close".
I have already tried the uninstall & reinstall "solution".
What else can I do. I have a paid for document I would like to read.
Thanks.Hi ynotcookit
Please make sure that antivirus has been disabled...
Check the .net framework installed on the machine and update it, if required
Also, Let us know the exact OS that you're using?
Thanks,
Mandeep
Maybe you are looking for
-
I have a windows laptop with Vista Home Basic and need to use windows for course work. How can I get it onto my Mac as I have no disks. Laptop arrived with Vista pre-loaded. Thanks
-
Hi , All I got problem when i am using solaris for the first time , i have a leptop DELL Inspiron 6400 with 1 GB RAM and 2GM CPU , when i boot the solaris from DVD after i choose SOLARIS from the black window the next step when he showing the device
-
Help regarding calling BRFPLUS function through ABAP code
Hi, I have a situation where I have to input data into a BRFPLUS function as a table (i.e the data is input as select options where list or range of data can be provided).The corresponding output is also in the form a table .I've created thi
-
Where's the OS X 10.8.3 Combo Update installer?
Hi, I know the OS X 10.8.3 update is now released to the general public. However, I am having trouble finding the OS X 10.8.3 Combo update at the Apple Support Downloads page. Is the Combo installer available? or should I wait until later tonight to
-
SBS2008 SP2 Current WSUS I forgot to do a regular cleanup of the data base. It is now 20 GB in size. When I do a options - cleanup and only check Unused and update revision, it runs for several hours and then gets a Database error. I Reset Server Nod