ICal invitations are sent with work email calendar and respond to personal

Ical is set up to receive my work calendar called [email protected] Work email is a google webmail account. Office workers send invited to me from google calendar. I can accept these and they DO show on my .mac Ical.
On Ical, i have a list of standard calendar topics (home, work, school, etc). I have the shared google calendar set up as a second calendar on the ICal application. No problem.
My VCard has all work information. No personal at all. Work email, etc.
My email mailboxes for both inbound and sent Are in rank order meaning "work" email is draqgged over ".mac personal" on both scenarios.
Problem is This: When I create invites for "work calendar" , a new event pops up, "work email" shows as the Calendar and everything looks good and it does go to the invitee.
1. Invitee receives the invitation and the invite states that it is from the ".mac PERSONAL" calendar
2. My name shows as the organizer however has my personal email as the default (Not my work email as listed in my VCard)
3. Most annoying of all, my "[email protected]" email address(If clicked on by the invitee) states my Wifes name on the email address bar.
I have checked everywhere as to why my wife is showing up as the "owner" or my personal .mac account. Not anywhere on my .me account, .mac account, VCard, etc.
Help?
I want to send my invites from my work email account using Ical with the responses showing, and responding to the same work email address. Simple right?

I have to admit... Im getting frustrated.
I deleted the shared google calendar. Starting over. I created a work calendar called "MSL" under the "calendars" drop down in ical.
Created a test event, sent it to a personal account, clicked the link to accept and the link sends me to Entourage? See Below... Says iCal... Link goes to Entourage.
MSL Packaging and Fulfillment' has invited you to the iCal event: New Event Test, scheduled for December 16, 2009 at 4:00 PM (Eastern Standard Time). To accept or decline this invitation, click the link below.
I want to:
1.Sync google calendar with my [email protected] webmail account and my ICAL.
2. Send invites from my ICAL when using my work address in imail, have them send from my work address, respond to my work address, and show up on google and ical calendars.

Similar Messages

  • ICloud iCal invitations are sent out in German

    My iCloud calendar invitations are sent out in German even though my icloud.com account settings say the account is managed in English. What can I do?
    where is the email generated? within mail? within ical? I'm running an English version of Mac OS X 10.7.3 Lion. Mail is in English.
    Could this be because the account was originally a mac.com then a mobileme and now an iCloud account. Some sort of legacy information on the account that there just isn't an option to change anymore?!
    Grasping at straws here. Beyond annoying!

    Found the answer - sorry guys!
    jordifromaustin Austin
    Re: how to change language for ical server invitations? 
    Jan 23, 2012 9:43 AM (in response to philippergo)
    I think I have the solution to this issue.
    What Happened to me:
    When I send invitations to my friends, they received the invitations in Japanese (I was in Japan for 2 years, that's when I created the MobileMe account, perhaps it is related).
    I changed the language of iCloud (in User Name -> Preferences, after signing in intohttp://www.icloud.com). The language was already "English".
    But the problem persisted:
    My Solution:
    Go to: https://appleid.apple.com, (Manage Your Account, once signed in, go to "Language & Preferences")
    There, you can type in the language for your inviations (English). Check the primary and the alternate mail addresses just in case. Sometimes, if the primary mail address is not iCloud or me.com, the invitations are not sent propperly.
    After that, you can save your settings. The invitations are sent in English.
    Problem solved on my side.

  • Can't sync Work exchange 2007 email, calendar and contacts on my Mac

    I am new to Mac. I've been trying to set up my work email, calendar and contacts (Exchange 2007) on my new personal Mac without much success. I have all contacts, calendars and mail syncronized on my Iphone, but when trying to sync calendars via Itunes with Mac ICal, all it does is add ICal entries onto my Iphone (and then they appear twice on iphone and work calendar)
    Haven't figured out how to import contacts into email either, although I had some success in setting the account up as a pop account in Mail (we use OWA otherwise for web access)- but can't send, just receive.
    Please help - where can I find some stept by step guidance / tutorials on how to do this? I don't want to subscribe to MobileMe or install any windows or Microsoft software on my Mac. Many thanks in advance.

    I could very well be wrong, but here's what I did.
    At my work we got an Exchange 2007 server and I got an account on it, so I set up my iPhone, but I didn't sync it to the calendars on my desktop Mac, instead I went into Mac Mail, Preferences, Accounts, then added an Exchange account inserting all the same account information that I had put into the iPhone. Then my iCal, Mail, Address Book all synced over the air. I do not have MobileMe, but I'm not sure what my work has on their Exchange server.

  • I cannot sync Ical on my iMac with my professional calendar (outlook web access). and I don't understand why it doesn't work since I have already made it with my iPhone. Help

    Hello,
    I bought an iMac few days ago. I would like to sync ical on my iMac with my professional calendar I use in my company (from outlook web access).
    I was easy to manage it on my iPhone (I just add a new "exchange" mail account and ask for a calendar sync only) and it worked very quickly.
    But I cannot do it with the iMac, and I don't undersatnd why?
    the domain is is used for my iPhone is the following :
    owa.companyname.com
    I tried all the solutions I found in this forum but it doesn't work.
    Many thanks in advancefor your help.
    Matt

    Does it have to be an applet?
    If you want the same behaviour as in the code with traffic lights, change
    class MortgageApplet extends JApplet implements ActionListener {
    to
    class MortgageApplet extends JFrame implements ActionListener {
    and change
    public void init() {
    to
    public MortgageApplet() {                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • In Mail, how do I make it so that email replies to me are sent to the email address from which I sent my original message?

    I have two IMAP accounts set up in Mail, one work and one personal. The personal account also receives emails from a third account (but I have that set up through gmail's forwarding, not Mail). I am sending emails from my work account and replies are coming to this third account, which I don't want to happen.
    How do I make it so that replies to me are sent to the email address from which I sent my original message?
    Thanks for your help!

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • When working in my photo album in iphoto my photos are replaced with a grey box and an !. I can't see the image on the page.

    Lately when I am working in my photo album in iPhoto my images are replaced with a grey box and an ! . I can't see the images on the page. All my photos are high quality.  What am I doing wrong?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • When I text one person, It goes to another person...however, the name that I'm trying to text shows the number i'm trying to text. Also, my texts are sent through my email...why?

    When I text one person, It goes to another person...however, the name that I'm trying to text shows the number i'm trying to text. Also, my texts are sent through my email...why? The text preview shows up as the person I did NOT want to text, but when I open it, it shows the person I DID want to text.

    sms's are charged by the sms internet data is charged by megabyte
    so apple make their message system so sms's sendt while connected to the internet were
    sendt by email to the contact rather then by the more expensive sms option

  • HT4597 I use google for my email, calendar and contacts.  My photos are in iPhoto on my Mac.  I have an Android phone.  Is there any reason I should move to iCloud?

    I use google for my email, calendar and contacts.  My photos are in iPhoto on my Mac.  I have an Android phone.  Is there any reason I should move to iCloud?

    If you don't use MobileMe then there is no point moving to iCloud.

  • HT1692 I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; twpo problems--I now get dozens of new calendars every time, and my calendar will not syncd at all.; meaning that date entries on Outlook do no

    I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; two problems--I now get dozens of new calendars every time, and my outlook calendar will not sync at all.; meaning that date entries on Outlook do not come across ot iPhone.

    It is unusual for the calendar to sync and not the contacts in Outlook. I've worked with Outlook for years. You didn't answer what computer OS you are using. If it is Windows, have you tried to reset the sync history in iTunes? Do that by opening iTunes, go to Edit>Preferences>Devices and click on reset sync history. If you have done this and it doesn't help, then we can try and run scanpst.exe on your Outlook file and see if there are any errors. Search your computer for that file, however it normally resides in one of the Microsoft Office folders in the folder Program files. After that, you can see if it will sync.

  • Adobe Acrobat Reader DC could not open 'Hilti DCG 125-S Angle Grinder.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    trying to open a file i have downloaded and it comes up with this responce
    Adobe Acrobat Reader DC could not open 'Hilti DCG 125-S Angle Grinder.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Here are three documents that i down loaded, there are others
    John Buckley
    5 Sunmead Walk
    Cherry Hinton
    Cambridge
    CB1 9YB
    07411142946
    0845 3881751
    [email protected]
    www.cambridgeriskmanagement.com
    Cambridge Risk Management Limited is a trading name of Comply UK Cambridge

  • I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that account.  How do I change the email address to a new one that I can access?

    I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account.  Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace.  How do I change the email address to a new one that I can access?

    If you remeber the password to that Apple ID then follow these steps
    1 - Make sure you have an email address that is NOT an Apple ID
    2 - Go to AppleID.Apple.com
    3 - Where it reads Manage Apple ID - Sign in
    Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
    [To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
    Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
    I learned this not to long ago and worked for me. Hope this helps you!

  • Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook Calendar and Outlook Contacts.  I don't know what else to try, short of resetting the iPhone and completely reloading as a new device.  Any ideas, anyone?

    Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook2010 Calendar and Outlook2010 Contacts.  I don't know what else to try, short of resetting the iPhone and completely reloading as a new device.  Any ideas, anyone?

    It's good to know.  The Apple instructions for loading iCloud on a PC just seem to have either overlooked or hidden this limit.  The larger problem is that it partially works:  partially and erratically.  So clean-up is great fun.

  • How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    BKBK,
    Thank you for your response. That does adequately cover the
    client-originated sessions, but still leaves the ability I am
    looking for unavailable.
    It did serve to definitively answer my most pressing
    question, however, with this statement:
    Note: ColdFusion cannot create a session if an initiator
    application uses a SendGatewayMessage method to start an
    interaction with a client, such as an SMS user. In this case, the
    sending code must keep track (for example, in a database) of the
    messages it sends and their destinations. When a response event
    arrives, it can look up the origniatorID to determine whether it
    was in response to an outgoing message.
    I will play around with the Application scope to see if there
    might be a workable solution there.
    RLS

  • Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).".  Is fix the same as on previous OS versions?

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Security
    and check the box marked
    Allow Plug-ins
    Then click
    Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • Adobe Reader could not open 'cpd39346.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    I use a Macbook Pro w/ OS X.  I am unable to open a .pdf file downloaded from the internet, Adobe always shows "@Adobe Reader could not open 'cpd39346.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Are you trying to open a pdf within a browser (clicking a link)? If so, which browser?

Maybe you are looking for

  • Remote Desktop Web Services Broken in Internet Explorer 10 - No Icons

    This issue is only effecting IE 10.  My TS WEB setup functions perfectly in IE 9.  After upgrading to IE 10 when I connect to my RD WEB page, none of my apps show any icon at all.  If I click the compatibility mode button at the top of the browser, t

  • How can I get to read a large file and not break it up into bits

    Hi, How do I read a large file and not get the file cut into bits so each has its own beginning and ending. like 1.aaa 2.aaa 3.aaa 4.... 10.bbb 11.bbb 12.bbb 13.bbb if the file was read on the line 11 and I wanted to read at 3 and then read again at

  • Why JSlider event listener no response?

    Thanks, hi, the JSlider does exist, but when it slides, data is unchanged. Please help. import java.io.*; import java.awt.*; import javax.swing.*; import java.util.Hashtable; import java.awt.event.*; import javax.swing.event.*; // import AppletAndApp

  • LR 1.1 updates XMP/metadata apparently for no reason

    I have checked both "Write develop settings to XMP..." and "Autmatically write changes to XMP" and I find that just by browsing through images DNG files and XMP files are updated even though I haven't done any changes. If I have a library full of RAW

  • Create SQL string, PL/SQL

    Hi, In my application I have a selectList component, called P1_SELECTLIST. When a user chooses a value, say, 'Car,' I would like my report to return allvalues contained in subclasses of object type 'Car.' I have successfully setup a hierarchy table.