IChat - compatibility problems between v2.1 and v3.1

Hi,
I now have the new iMac Intel with iChat 3.1. I am trying to use it with a friend who has OS 10.3.9 with iChat 2.1.
I can see and hear him, but he can only hear me.
Is there a compatiliby problems between v2.1 and v.3.1 or it is just a configu problems?
Thanks a lot for any information
Bruno

Most likely cause is that you haven't updated the ProApplication Support file. Check here:
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

Similar Messages

HT4623 Is there any compatibility problem between iPod 4 and Bose docks?

Is there any compatibility problem beteween ipod touch 4 and Bose docks?

What does Bose say? Make sure you look for a 4G with iOS 6.
I do not recall being aproblem with iOS 6 but with 7 I think yes.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the dock
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Compatibility problem between HBS-730 and iOS6 (6.0.1) ?

I bought bluetooth headset named HBS-730.
But, I think iOS have some problem with the compatibility about Bluetooth as follows.
Sound streaming is delayed about 1 seconds. For instances, I got the game item in game play. After 1 seconds, The sound play. This is very unconfortable.
Also If I listen to the music and pause the play, I hear the noisy after 1 seconds.
I've search the similar issue in this community. and I found the follows.
https://discussions.apple.com/thread/4389635
Re: IOS 6 bluetooth issues - micro cuts on musichttps://discussions.apple.com/message/19670046#19670046
I think this is bluetooth 3.0 compatibility problem because backbeat headset is works well with iOS6.01
backbact is equiped with bluetooth 2.1
First of all, I wonder this issue is iOS's problem or headset's problem.
Please help me. I want to escape the this delaying problem.
I'm very unconfortable and I lost the trust about the Apple's product.
Thank you.

I bought bluetooth headset named HBS-730.
But, I think iOS have some problem with the compatibility about Bluetooth as follows.
Sound streaming is delayed about 1 seconds. For instances, I got the game item in game play. After 1 seconds, The sound play. This is very unconfortable.
Also If I listen to the music and pause the play, I hear the noisy after 1 seconds.
I've search the similar issue in this community. and I found the follows.
https://discussions.apple.com/thread/4389635
Re: IOS 6 bluetooth issues - micro cuts on musichttps://discussions.apple.com/message/19670046#19670046
I think this is bluetooth 3.0 compatibility problem because backbeat headset is works well with iOS6.01
backbact is equiped with bluetooth 2.1
First of all, I wonder this issue is iOS's problem or headset's problem.
Please help me. I want to escape the this delaying problem.
I'm very unconfortable and I lost the trust about the Apple's product.
Thank you.

Compatability problems between NI-FBUS and Rosemount DXR375

Hello,
Some time ago I had the chance to use a Rosemount DXR375 FF handheld, which I hope is familiar for most instrumentation users. Well, I was using Configuration 2.3.6 and I had problems when I hooked up the DXR375, like having other devices going offline or even dissapearing from the network. I have tried to match the communication parameters, (T1, T2, T3, slot time, etc.) but I was not able to use DXR375 in combination with NI-Fbus in sa safely way. Please note that both FF interfaces (NI-FBus Configurator and DXR375) work properly when used separately, but as soon as they are together, conflict appears.
I would like to know if somebody at the forum have good experience with DXR375 in combination with NI-Fbus.
Thanks in Advance,
Alfredo Matus
Service Manager
Endress+Hauser Chile Ltda.

Alfredo,
To be honest, I am not clear the relationship between DXR375 and Emerson 375 Field Communicator device. But if you are talking about 375 Field Communicator, I had ever put NI interface card together with it in the same H1 segment before, and as I remembered, the devices on the segment worked properly and I was able to read data from NI-FBUS Configurator software.
However, as I know, the 375 Field Communicator normally works in a vistor address and will not conflict with LAS device, thus the PCMCIA-FBUS card is able to work well with it.
I think the best way to find out the problem is to have another NI interface card with NI-FBUS Monitor software if it is possible; with the Montor software, you can simply know whether there is conflict in node addresses or bus communciations.
Anyway, please feel free to contact us at [email protected] if you want to have further discussion about any conflict issues.
Regards,
-- Sean
BTW: If you need any help to upgrade your Series 1 card, just let me know.

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

cherifrombartlett wrote:
PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION
What are you talking about? If I'm not not mistaken the iPad was released in April 2010 so there is no 2009 iPad version.
Typing in all capital letters in a forum like this is considered to be rude and all capital letters indicate that you are shouting.

Compatibility problem windows7- 64 bits and oracle 8

I have a compatibility problem with windows 7 and 64 bits and oracle 8 client
the data server is also version 8
What type of client is compatible with oracle 8 and 64 bits?
or any solution to the problem.
I use the client to run a desktop application
thanks

Oracle 8 client is not certified on Windows 7. Client 10.2.0.5 is compatible with Oracle 8 and is certified on Windows 7 too.
To install 10.2.0.5 client, please refer to the MOS document.
How To Install Oracle 10.2.0.5 Client Software on Windows 7 (32 or 64-bit) and Windows 2008 R2 (64-bit) (Doc ID 1316079.1)

Externalizable problems between v1.3 and v1.4

Hej you.
I have strange problems with the Externalizable objects.
I Use many Object to Save my file, but wien i try to Externalizable on J1.3 and Denalizable again in J1.4 I got this message:
E:\Programmer\Java\ProrgamName>Java ProrgamName
javax.swing.JInternalFrame; Local class not compatible: stream classdesc serialV
ersionUID=8792953236056021037 local class serialVersionUID=-6387351733537024688
Can i trap J1.4 ID to use 1.3 ID, so it can use on ALL platforms, not just locally?
When I Save and load on the same machine it works fine, but not when i moving to another machine with 1.4. Is a another method, or i Need to save all object to AscII instead in this smart method (that are poorly work)? I have surfed around javasoft.com with finding a answear.
See my early quenstien on (closed):
http://forum.java.sun.com/thread.jsp?forum=31&thread=273990
With very regaards By:
Super Bomba, Denmark
PS. No Duke Dollars this time. Sorry.

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

How to solve sync problem between Outlook calendar and iPhone when reminder is set to _some_ non-standard values?

Hi,
I am having a sync problem between my iPhone/iPad and Outlook calendar events (Outlook 2010).
Here is the description of the problem:
1. In Outlook - please create a new event/appointment (e.g. "Test").
2. Reminder is set by default to 15 minutes. You can change it by using a dropdown menu - please select: "0,5 days".
3. Click on "0,5 days" and change it manually to "14,5 days".
4. Click on "Save & Close".
5. (Do not snooze or dismiss the reminder.)
6. Sync with your iPhone/iPad.
7. Open this new event on iPhone/iPad - you can see that alert is set to "15 minutes before" instead to a correct value that was set in Outlook.
The same problem can be seen if you set the reminder to e.g. "3 weeks" (standard value is "2 weeks").
However, it is interesting that non-standard values like "1,5 days" (and all other until "13,5 days") are synced without any problem.
Does anyone have a solution how to solve this problem (different than the trivial solution of not using those strange values)?
Thanks!

Thanks to another post (https://discussions.apple.com/message/17501071#17501071) I reset the sync history, here is what to do:
Launch iTunes.
Before you hook up your iPhone to the PC and iTunes do this: Go to iTunes Edit menu > Preferences… > select the iPhone > click the Reset Synch History button > click OK.
Connect the iPhone to the PC and let iTunes recognize it.
In the top right corner is the iPhone icon, click on the left side of the iPhone icon > the iPhone menu launches.
In the menu along the top click on Info > make your selections > click Sync button > it gives you a dialog at the top with the steps it’s going through during the sync.
In the top left of the iTunes app > click Exit.

Problem between SOAP Sender and JDBC Receiver

Hi,
I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
The idea is sending an ID for updating one register.
Table structure is:
TABLE AS_PERSONA
    (P_RUT                         VARCHAR2(10) NOT NULL,
    P_NOMBRE                       VARCHAR2(50),
    P_APELLIDO                     VARCHAR2(50))
The ID is the P_RUT field.
The structure of message that I send by SOAP, is the following:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
               <CONSULTA>
                    <P_RUT>15445</P_RUT>
               </CONSULTA>
          </m:MT_CONS_SOAP>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The JDBC receiver structure is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
     <Statement>
          <AS_PERSONA action="UPDATE">
               <table>AS_PERSONA</table>
               <access>
                    <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                    <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
               </access>
               <key>
                    <P_RUT>15445</P_RUT>
               </key>
          </AS_PERSONA>
     </Statement>
</ns0:MT_CONS_PERSONA>
When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
Thanks.

Hi,
Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
Regards,
Sushumna

Password synchronization problem between sun DS and ADS

Hi
I installed the sun one indentity synchronization 1.0. I synchronize password between one DS and one AD.It is working fine. My problem is i want to synchronize between two sun one DS and one AD , but it is ignoring the one DS in Sync , anothe DS and AD is Synchronizing. It is not synchrnonizing the two DS and one AD server.
My SUL Configuration is
SUL Name : DS1ToADS
Windows
Base DN : ou=newsync,dc=esecurity,dc=com
Filter : destinationindicator=ameer.com
Creation Expression : cn=%cn%, ou=newsync,dc=esecurity,dc=com
Sun One Directory Server
Base DN : cn=authorization2,dc=ameer,dc=com
destinationindicator=ameer.com
SUL Name : DS2ToADS
Windows
Base DN : ou=newsync,dc=esecurity,dc=com
Filter : destinationindicator=basha.com
Creation Expression : cn=%cn%, ou=newsync,dc=esecurity,dc=com
Sun One Directory Server
Base DN : cn=authorization2,dc=basha,dc=com
destinationindicator=basha.com
I am synchronizing the existing users using the following file.
<?xml version="1.0" encoding="UTF-8"?>
<UserLinkingOperationList allowLinkingOutOfScope="true">
<UserLinkingOperation parent.attr="UserLinkingOperation"
sulid="DS1ToADS">
<UserMatchingCriteria parent.attr="UserMatchingCriteria">
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="sn"/>
<AttributeDescription parent.attr="WindowsAttribute" name="sn"/>
</AttributeMap>
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="employeenumber"/>
<AttributeDescription parent.attr="WindowsAttribute" name="employeeid"/>
</AttributeMap>
</UserMatchingCriteria>
</UserLinkingOperation>
<UserLinkingOperation parent.attr="UserLinkingOperation"
sulid="DS2ToADS">
<UserMatchingCriteria parent.attr="UserMatchingCriteria">
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="givenName"/>
<AttributeDescription parent.attr="WindowsAttribute" name="givenName"/>
</AttributeMap>
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="employeenumber"/>
<AttributeDescription parent.attr="WindowsAttribute" name="employeeid"/>
</AttributeMap>
</UserMatchingCriteria>
</UserLinkingOperation>
</UserLinkingOperationList>
Should not showing the any error after synchronization.
I am giving my log files
resync log
[05/Jan/2005:17:29:12.505 +0530] INFO 66 CNN101 csi2a01 "Sent remote source entry 'dn: 'CN=actusr2,OU=newsync,DC=esecurity,DC=com' [activedirectorydomainname=esecurity.com, employeeid=11112]'." (Action ID=CNN101-10142707E24-10, SN=4)
[05/Jan/2005:17:29:12.958 +0530] INFO 66 CNN101 csi2a01 "Sent remote source entry 'dn: 'CN=actusr1,OU=newsync,DC=esecurity,DC=com' [activedirectorydomainname=esecurity.com, employeeid=11111]'." (Action ID=CNN101-10142707E24-11, SN=4)
[05/Jan/2005:17:29:13.051 +0530] INFO 66 CNN101 csi2a01 "Sent all entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=0)
[05/Jan/2005:17:29:14.098 +0530] INFO 66 CNN101 csi2a01 "Sent all entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=0)
[05/Jan/2005:17:29:17.442 +0530] INFO 71 CNN100 csi2a01 "Received all remote entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=5)
[05/Jan/2005:17:29:18.567 +0530] INFO 62 CNN101 csi2a01 "Received all remote entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=10)
[05/Jan/2005:17:29:22.098 +0530] INFO 72 CNN102 csi2a01 "The Windows entry 'dn: 'CN=actusr1,OU=newsync,DC=esecurity,DC=com' [employeenumber=11111, givenname=ameer1] [destinationindicator=[basha.com, ameer.com]]' is already linked to the Directory Server entry 'dn: 'uid=ds1ameer1,cn=Authorization1,dc=basha,dc=com' [employeenumber=11111, destinationindicator=esecurity.com]'." (Action ID=CNN101-10142707E24-11, SN=5)
[05/Jan/2005:17:29:22.098 +0530] INFO 71 CNN102 csi2a01 "The Windows entry 'dn: 'CN=actusr2,OU=newsync,DC=esecurity,DC=com' [employeenumber=11112, givenname=ameer2] [destinationindicator=[basha.com, ameer.com]]' is already linked to the Directory Server entry 'dn: 'uid=ds1ameer2,cn=Authorization1,dc=basha,dc=com' [employeenumber=11112, destinationindicator=esecurity.com]'." (Action ID=CNN101-10142707E24-10, SN=5)
[05/Jan/2005:17:29:22.520 +0530] INFO 73 CNN102 csi2a01 "Received all remote entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=5)
[05/Jan/2005:17:29:22.629 +0530] INFO 63 CNN101 csi2a01 "Received all remote entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=10)
audit log
[05/Jan/2005:17:29:15.629 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11112] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr2 destinationindicator: basha.com, ameer.com dn: CN=actusr2,OU=newsync,DC=esecurity,DC=com employeenumber: 11112 givenname: ameer2 objectclass: top, person, organizationalPerson, user dspswuserlink: tZeGDb7WM0SW72YcOMzfew== pwdlastset: 127493062677968750 samaccountname: 1234 sn: nagore2 usnchanged: 115104 whenchanged: 20050104100213.0Z}." (Action ID=CNN101-10142707E24-10, SN=3)
[05/Jan/2005:17:29:15.895 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11112] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr2 destinationindicator: basha.com, ameer.com dn: CN=actusr2,OU=newsync,DC=esecurity,DC=com employeenumber: 11112 givenname: ameer2 objectclass: top, person, organizationalPerson, user dspswuserlink: tZeGDb7WM0SW72YcOMzfew== pwdlastset: 127493062677968750 samaccountname: 1234 sn: nagore2 usnchanged: 115104 whenchanged: 20050104100213.0Z}." (Action ID=CNN101-10142707E24-10, SN=4)
[05/Jan/2005:17:29:16.208 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11111] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr1 destinationindicator: basha.com, ameer.com dn: CN=actusr1,OU=newsync,DC=esecurity,DC=com employeenumber: 11111 givenname: ameer1 objectclass: top, person, organizationalPerson, user dspswuserlink: tfNQqDQ8VEigzgJjrfcVSg== pwdlastset: 127493178093125000 samaccountname: 123 sn: nagore1 usnchanged: 115147 whenchanged: 20050104131009.0Z}." (Action ID=CNN101-10142707E24-11, SN=3)
[05/Jan/2005:17:29:16.926 +0530] FINE 16 CNN100 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=3)
[05/Jan/2005:17:29:16.926 +0530] FINE 16 CNN100 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=4)
[05/Jan/2005:17:29:16.973 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11111] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr1 destinationindicator: basha.com, ameer.com dn: CN=actusr1,OU=newsync,DC=esecurity,DC=com employeenumber: 11111 givenname: ameer1 objectclass: top, person, organizationalPerson, user dspswuserlink: tfNQqDQ8VEigzgJjrfcVSg== pwdlastset: 127493178093125000 samaccountname: 123 sn: nagore1 usnchanged: 115147 whenchanged: 20050104131009.0Z}." (Action ID=CNN101-10142707E24-11, SN=4)
[05/Jan/2005:17:29:16.973 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS2TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-13, SN=3)
[05/Jan/2005:17:29:16.989 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS2TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-13, SN=4)
[05/Jan/2005:17:29:17.442 +0530] FINER 13 SysMgr_100 csi2a01 "Sending an acknowledgement to the console for request (ID=1104926235041)."
[05/Jan/2005:17:29:17.473 +0530] FINE 13 SysMgr_100 csi2a01 "Sent an acknowledgement to the console for request (ID=1104926235041)."
[05/Jan/2005:17:29:17.457 +0530] FINE 71 CNN100 csi2a01 "The agent has received the following inbound action from the controller: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=6)
[05/Jan/2005:17:29:17.489 +0530] INFO 71 CNN100 csi2a01 "The agent is sending the following inbound action to MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=7)
[05/Jan/2005:17:29:17.504 +0530] FINER 71 CNN100 csi2a01 "The controller has acknowledged the following outbound action to the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=8)
[05/Jan/2005:17:29:18.192 +0530] FINE 16 CNN101 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=8)
[05/Jan/2005:17:29:18.364 +0530] FINE 16 CNN101 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=9)
[05/Jan/2005:17:29:18.676 +0530] FINER 62 CNN101 csi2a01 "The controller has acknowledged the following outbound action to the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=11)
Please do the needful
Basha

Hi Joshua,
Does this mean that I need to install the core and sub component but no need to install the DS and AD connectors. No!!! Core must only be installed on one machine! Here is a short summary of the steps during an installation having sun ONE LDAPs in multi-master replication (taking ldap2 as the machine, whrere core is installed):
1. Install core on ldap2
2. start console and configure your directory sources. For the sun directory source enter ldap2 as the preferred and ldap1 as the secondary ldap. Configure the rest: attribute-mapping, modification flow, AD-source, SULs, etc. save the configuration.
3. on ldap2 run idsync prepds untill you get the SUCCESS message in the following way (be sure to specify the secondary ldap with -j and -r options):
idsync prepds -h <ldap2> -p <ldap2port> -j <ldap1> -r <ldap1port> -D "cn=directory manager" -w <passwort> -s <configuration_registry_suffix>4. Run the install binaries again on ldap2. Install DS Connector on ldap2, install DS-Subcomponent (preferred) on ldap2. Install AD-Connector.
5. Copy over install binaries to ldap1. Run the install binaries on ldap1. Give ldap2 as configuration directory URL When you are asked, what components to install, select subcomponent. Select the suffix. When you are asked, what type of ldap, select secondary.
6. Copy over install binaries to any ldap slave in your replication topology and install the subcomponent there, choosing "other" as the ldap type.
Good luck again...
Jakob.

NFS problem between RedHat Client and Solaris Server

Hi all, we are experiencing a problem between a RedHat client and a Solaris 10 server. For the purposes of this post, I'll call the Redhat client server A and the Solaris 10 server B.
Server B is exporting a filesystem that server A is trying to mount. Server A can successfully mount the exported file system, however, strange things are happening. If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.
A look at the file on server B shows the file has the correct UID and GID (ie the UID & GID of server A).
The fstab file on server A looks like this:
serverB:/data /data nfs4 rsize=32768,wsize=32768,hard,nointr,rw,bg,actimeo=0,timeo=300,suid 0 0
Does anyone have a explanation for this?
NB: There is a firewall between server A and server B. A firewall rule is in place to allow traffic between the two servers on port 2049
Stewart

Hi
If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.On a NFS share, for security reasons, you normally dont have root provileges.
A file createt as root user will be mapped to nobody:nobody.
The behaviour you see is correct.
If you want the file to be createt as root, you have to export the filesystem with -o ro,anon=0
NFSv3 will be blocked by your firewall.
Franco

Email sync problem between iPad Air and iPhone 6+

Hello,
I have a user that travels quite a bit. We use Office 365 Enterprise
for our emails. He is reporting email sync issues between iPhone and iPad. Meaning
sometimes he will receive emails on the iPhone but not on the iPad or vice versa.
Both devices use the same AT&T network. Does anyone out there have any
suggestions as to what may be causing the sync problem between devices? I am
not sure if the devices ever have the same emails on the inbox. Does this make
sense? I will be happy to provide any other information if needed.
Thank you!

Hey daniel hkn,
Thanks for the question. It sounds like the email account may be configured and setup as a POP account. If so, check out this resource:
Using a POP account with more than one device - Apple Support
http://support.apple.com/en-us/HT201855
When using the same POP email account on more than one device, email messages may appear only on the first device that receives them. This occurs when an email client is configured to automatically remove email from the server after an email client has received it. You can configure your iPhone, iPad, iPod touch, or Mac either to keep a copy of the email on the server, remove it after a certain number of days have passed, or keep it until you move it from your inbox.
Thanks,
Matt M.

Browser compatibility problem with t:selectOneMenu and JavaScript calendar

I'm having problem with <t:selectOneMenu> and JavaScript calendar on IE. It works fine on Firefox but doesn't work on IE.
The JSF code is as follows:
<tr>
                                   <td align="right">
                                        Archive Date
                                   </td>
                                   <td align="left" colspan="3">
                                   <table cellpadding="0" cellspacing="0" border="0">
                                   <tr>
                                   <td>
                                   <span class="tuny_text">After (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateAfter" value="Archive Date After" rendered="false"/>
                                        <br/>
                                        <t:inputText required="false" value="#{nonItemImageSearchPage.stringArchiveDateAfter}" name="txtArchiveDateAfter" id="txtArchiveDateAfter" forceId="true" styleClass="inp" style="width: 128px">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateAfter" name="dtpArchiveDateAfter" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateAfter" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   <td>
                                   <span class="tuny_text">Before (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateBefore" value="Archive Date Before" rendered="false"/>
                                        <br/>
                                        <t:inputText value="#{nonItemImageSearchPage.stringArchiveDateBefore}" name="txtArchiveDateBefore" id="txtArchiveDateBefore" forceId="true" style="width:128px" styleClass="inp">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateBefore" name="dtpArchiveDateBefore" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateBefore" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   </tr>
                                   </table>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpBackground" value="Background"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpBackground" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.backgroundId}" styleClass="inp" style="width: 150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                        <s:selectItems value="#{nonItemImageSearchPage.backgroundPrefsList}"
                                                  var="backgroundPrefs" itemValue="#{backgroundPrefs.id}" itemLabel="#{backgroundPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpTheme" value="Theme"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpTheme" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.themeId}" styleClass="inp WCHhider" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.themePrefsList}"
                                                  var="themePrefs" itemValue="#{themePrefs.id}" itemLabel="#{themePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpSeason" value="Season"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpSeason" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.seasonId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.seasonPrefsList}"
                                                  var="seasonPrefs" itemValue="#{seasonPrefs.id}" itemLabel="#{seasonPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpClothing" value="Clothing"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpClothing" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.clothingId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.clothingPrefsList}"
                                                  var="clothingPrefs" itemValue="#{clothingPrefs.id}" itemLabel="#{clothingPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpToy" value="Toy"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpToy" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.toyId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.toyPrefsList}"
                                                  var="toyPrefs" itemValue="#{toyPrefs.id}" itemLabel="#{toyPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpJuvenile" value="Juvenile"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpJuvenile" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.juvenileId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.juvenilePrefsList}"
                                                  var="juvenilePrefs" itemValue="#{juvenilePrefs.id}" itemLabel="#{juvenilePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right">
                                        <h:outputLabel for="drpGroup" value="Grouping"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpGroup" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.modelGroupingId}" styleClass="inp" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.groupPrefsList}"
                                                  var="groupPrefs" itemValue="#{groupPrefs.id}" itemLabel="#{groupPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td class="left_separator"> </td>
                                   <td> </td>
                              </tr>
The JavaScript code is as follows:
<script type="text/javascript" language="javascript">
     var dtpArchiveDateBefore = new MooCal("txtArchiveDateBefore");
     var dtpArchiveDateAfter = new MooCal("txtArchiveDateAfter");
     window.addEvent("domready", function(){
     $("dtpArchiveDateBefore").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
     /*$("txtArchiveDateBefore").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
    $("dtpArchiveDateAfter").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
   /* $("txtArchiveDateAfter").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
     </script>When the calendar is above t:selectOneMenu, it doesn't show up on t:selectOneMenu area. Could anyone help me solve the issue?
Thanks
Rashed

There are dozens of CSS attributes that can (and have to) be handwritten. Trouble with them is that, like text shadows, they don't appear in all browsers. I have nine different browsers installed and test pages in ALL of them before I "finish" building site or page for a template.
I try to build for Firefox, out of personal preference for it, but I have to do things that work with IE because it still holds the market share (46%IE to 42%FF), and I will only go with designs that work in IE, FF, NS, Opera, Safari, and Chrome.
As to your questions.
1. The compatibility check is most likely current with the time of the build. I don't know if that component updates as browsers do, but I'd tend to think it doesn't. I'm using CS4 and there haven't been any updates for it in nearly a year. Firefox has released 4.0, Opera released 11, and Safari released 5 since then. The updater would have found and downloaded something if it was available.
2. I could only guess. Text shadows DON'T show up in design view (or in IE) but they do in browser preview. It's just a UI quirk, and it means "trial and error" is the onyl way to get what you want.
3. The quick-selects which are in DW dropdowns or popouts are the ones most common to CSS designs and have been proven to work with all browsers at the time of release of your particular build of DW.
Hope that helps..

Connection problem between sap bw and EAI

Hi
Please
I'd like to know why people who work on the part of my EAI project say there is a connection problem between eai and SAP BW. He explained that the connection is good at 12h AM and 16h PM the system was disconnected, he receive this error message:
System.ServiceModel.Security.MessageSecurityException: The HTTP request is Unauthorized with customer authentication scheme 'Basic'. The authentication header received from the server was' Basic realm = "SAP NetWeaver Application Server [DB1/100].
I like to know if this is a problem with sap bw (misconfiguration of authorisations) or at the eai.
Cordialy

Hello,
we have 2 possiblities in BW to get data into BW.
1) pull
2) push
I understodd that you want to push data to BW. Please have a look into the Howto paper: https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to send xml data to bw
and
https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to integrate bw to xi.pdf
If you want to connect an external system to BW and extract data to BW and the BW system is the leading system.
You need a RFC server, or UD connect (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/943de6c3-0401-0010-b7a4-8b1af193f642) or you can use db connect or you can extract flat files.
All of these possibilies are decribed in the online help and in howto papers.
hope this helps
Michael

Yahoo mail tells me to upgrade Safari but I have the latest version of Safari 6.0.1 Is there a compatibility problem with Yahoo mail and Safari?

Yahoo mail tells me to upgrade Safari but I already have the lastest version of Safari. Is there a compatability problem with the Safari 6.0.1 and the latest version of Yahoo mail?

Since Yahoo is web based email, the compatbility issue is on the Yahoo side, not Apple.
You can access your Yahoo account without having to use Safari.
Open the Mac Mail app. From the menu bar click Mail > Preferences then select the Accounts tab then the Account Information tab.
Click + to add your Yahoo account.

IChat - compatibility problems between v2.1 and v3.1

Similar Messages

Maybe you are looking for