IChat Service Cannot Start after 10.6.6 Updates

Hi,
My Mac Mini Server was working perfectly until I updated 10.6.6. All services are running except the iChat service. There is a series of error message in the log.
Any help? I have been searching everywhere but cannot find any solutions.
Thanks in advance.

Hi Tim,
I have a look at the topic "cannot log into iChat" post but this is not related to mine. My problem is very similar to some of the topics posted like "iChat server issues".
I have actually reinstall the whole server again. Checked all the services are running well (including the iChat service). Then, I run the Software Updates and the system updated with 10.6.6. Then, I restarted the server and the iChat service stopped now. The rest of the services are still running ok.
I suspect the 10.6.6 update has changed something and cause the service to stop.
Hope the information is sufficient. Thanks in advance.

Similar Messages

  • IChat Service cannot start anymore.

    About 2 months ago after i removed the iChat service i renamed my harddrive from HD 2 to HD2 (without the space) because of certain problems. Today i wanted to install the iChat service again but it won't start due to many problems. I think the reason is it still looks for it's files on HD 2. I don't know if there's anything i can change.
    For instance, it can't find the /etc/jabberd/router-filter.xml .. but the file is there, just not on HD 2 but on HD2.
    Anybody knows how to change this ? Maybe a pref or config file somewhere ?
    Thanks.
    Arno

    When you say you removed it, did you delete the files?
    If you did and you added them back, I suspect they have the wrong owner.
    They should be _jabberd.

  • FE service cannot start after the update was done

    Hi,
    We are installing lync 2013 standard Edition server on windows server 2008 R2.
    Certificates are public ones and they are from Digicert.
    We managed to go to step 3 (certificates part is ok).
    We cannot start the FE service.
    We tried everything regarding resetting fabric state, registrat  etc.
    We made the update with the newest patch (February 2015).
    FE cannot be started:
    We still got the errors:
    "Failed to sync data for Routing group {19F4D868-D0A1-53D8-BE89-1BFA7BDE645E} from backup store.
    Cause: This may indicate a problem with connectivity to backup database or some unknown product issue.
    Resolution:"
    "This process was not able to update its health status
    The Audio-Video Conferencing Server failed to send health notifications to the MCU factory at.."
    and so on...
    as could be seen under link: http://troubleshootinglync.blogspot.com/2014/03/lync-2013-front-end-service-wont-start.html
    Any idea what could be wrong?

    Hi iron_folower,
    You can follow the steps below to troubleshoot your problem:
    1. Install the Root Certificate and the Intermediate Certificate from Digicert.
    2. From:
    https://social.technet.microsoft.com/Forums/lync/en-US/506821e2-d3fe-42bd-a6dc-daed6c5f0df6/the-audiovideo-conferencing-server-failed-to-send-health-notifications-to-the-mcu-factory-at?forum=ocsconferencing
    Try to create the REG key:
    HKLM\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL and create a dword entitled
    Sendtrustedissuerlist with a hax value of 0.
    3. Reinstall the base OS features:
    Import-Module ServerManager
    Add-WindowsFeature Web-Dyn-Compression,desktop-experience,RSAT-ADDS,Web-Server,Web-Scripting-Tools,Web-Windows-Auth,Web-Asp-Net,Web-Log-Libraries,Web-Http-Tracing,Web-Stat-Compression,Web-Default-Doc,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Http-Errors,Web-Http-Logging,Web-Net-Ext,Web-Client-Auth,
    Web-Filtering,Web-Mgmt-Console,Msmq-Server,Msmq-Directory
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IChat won't start after 10.4.3 update!!!!!

    After I installed 10.4.3 iChat won't start. It would look like it was going to Launch and would quit. I looked at all the postings and found a couple of ideas, but nothing that worked. The only way I can get on is by disabling my network connection and then starting iChat and then re enabling my network connection. Any other ideas. Please let me know.
    G4 Laptop   Mac OS X (10.4.3)  

    Ralph, no offense, I know you're trying to help this guy, but all you've done to offer him advice is to tell him what he already said he's doing and was trying to not have to perform every single time he wants to use iChat.
    In his ORIGINAL post, he said exactly this:
    The only way I can get on is by disabling my network connection and then starting iChat and then re enabling my network connection.
    Please try and really read what someone asking for help is saying, then offer advice if you've got it. All it looks like here is that you weren't really paying attention to his problem in the first place.
    As for me, I'm having much the same problem as a lot of people getting iChat to work, and I clicked on this seeing it had a reply thinking I was going to finally find an answer. It's a little frustrating to see people reply with exactly the same information they've already been given just being repeated back to them.
    2.7Ghz Power Mac G5    

  • HP dv3-2000 audio service not start after i run uniblue powersuite. event log says can't find path.

    after i run uniblue powersuite to clean up my registry, speedup my pc and update my drivers, I cannot start my dv3-2000 laptop. After I updated the BIOS, following the suggestion on the forum, I can get the vista start but no sound. I then checked the event log which says the audio service cannot start because it can't find the path specified. How can I solve this problem?

    If the printer is connected USB to the Windows 7 machine, what you can do is share it to the network (assuming the XP computer is also connected to the same network). This way the XP machine can see the printer on the Windows 7 computer and install it. The only drawback is that the Windows 7 computer will need to be powered on for the XP computer to be able to see and print to it. I have linked a third party site below for instructions on how to do this.
    http://www.howtogeek.com/howto/windows-7/share-fil​es-and-printers-between-windows-7-and-xp/
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • OBIEE 11g opmnctl services cannot start (ping failed in ready callback)

    Hi,
    The BI server is up and running
    The platform is Linux, searching forums it's due to /etc/hosts and it is defined as
    127.0.0.1 localhost.localdomain localhost
    127.0.0.1 <servername>.<domain> <servername>
    All OPMN services cannot start with error messages (ping failed in ready callback).
    Any idea is highly appreciated !!!
    Thanks.

    Hi,
    Make sure static ip r u using? If u used to installed dynamic
    Ip it throw this kind off issue . I have face this same issue in obiee11.1.1.3 with dynamic ip address
    Note: u shoud use static ip ( configure look back adopter )
    Thanks
    Deva

  • Secure Socket Tunnelling Protocol Service cannot start

    I'm having problems with my mobile broadband since the Dec 2011 updates cycle.
    Hardware: ASUS F6VE laptop, core2duo, 4 gig ram, ATI graphics
    OS: Microsoft Windows 7 Home Premium 32bit SP1 completely updated to Dec 2011. This install was originally Vista Home Premium 32bit and upgraded to Win7.
    AV:  Microsoft Security Essentials
    The symptoms:
    Error 711:" The operation could not finish because it could not start the Remote Access Connection Service manager in time."
    Rasman cannot start because Secure Socket Tunnelling Protocol service cannot start.
    The system log is now filling up with:
    7001: "The Remote Access Connection Manager service depends on the Secure Socket Tunnelling Protocol Service service which failed to start because of the following error:
    The operation completed successfully."
    and
    7036: "The Secure Socket Tunnelling Protocol Service service entered the stopped state."
    Attempting to open the properties of the dialup adaptor gives an error dialog box:
    Title:"Network Connections"; Message:"An unexpected error occurred." Removing the existing connections and trying to reinstall the modem made no difference.
    The issue is specific to the dial up / mobile broadband though as the Ethernet still works fine. The mobile broadband stopped working when I let the December 2011 Windows Updates install. It was fine till then - I'd been using it all day before applying the
    updates that night. The only odd thing that I will say is that for a few weeks now, occasionally Windows would occasionally not detect the display, keyboard and track pad on first boot, but restarting generally was successful. Then just when I started up the
    PC to download the hot fixes, the Windows detected "new hardware" and reloaded drivers for the ACPI x86 based PC (i.e. the HAL driver) and a few others that I wasn't quick enough to note. I've never seen that happen before, but now the hardware is being set
    up correctly each boot and seems to behave apart from SSTP service is broken.
    Rolling back to a previous restore point did not fix it, nor did uninstalling the hotfixes.
    I've tried pretty much every fix that I have been able to find and none are successful.
    The "fix" by removing sstpsvc as a dependency in the RasMan registry key was unsuccessful.
    The "fix" by deleting the contents of %system32%\Logfiles\WMI and %system32%\Logfiles\WMI\RtBackup was unsuccessful
    The "fix" by reregistering netshell.dll and ole32.dll successfully registered for the former, but not ole32.dll. The problem was not fixed.
    "sfc /scannow" only finds the autochk.exe hash issue, which has been a present for some time.
    I will mention that I had VMWare Workstation 7.1.4 installed. I tried to uninstall it a while back, but it broke another program that I need - probably something to do with the sentinel driver. I have now uninstalled VMWare and reset the TCP/IP stack without
    issue. The problem was not fixed though.
    I really don't want to reinstall as it's taken me quite some time to get it set up as I want it

    You don't need to start the services you just need to make sure that the startup type is set to manual.
    The service itself will start when needed.
    This message here is not an error or problem, it is just telling you that service is not being used by anything on your computer.
    SSTP: "The Secure Tunnelling Protocol Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs."
    What exactly are you trying to do that requires this service (SSTP)?

  • Zen 8G This device cannot start code 10 and firmware update problem

    I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
    I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
    If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

    Hi,
    My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
    Same issue for iphoto .
    Help
    Benoit

    help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

  • HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

    My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

    Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

    Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

    That's because part of iOS7 had code in it to look for and recognize unsigned cables.
    In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

  • J2EE Engine cannot start after applying SP11 on WAS 6.40

    Hi SAP
    I am upgrading my WAS 6.40 SR1 java instance from SP9 to SP11. At the last stages of the installation the Java instance is stopped & started,at the step where Java instance is started, the 'server' process of the Java instance is not coming up properly. jcmon shows the dispatcher & SDM with status 'running' while server0 is with status 'stopped'.
    Since I'm using ABAP as data source to the J2EE, appears to me that the problem is occuring due to password mismatch for user SAPJSF in R/3 client 168 & between user SAPJSF in J2EE though I'm not sure why the password might change in J2EE after applying SP11.
    Please advice if my reasoning is correct, if no please advice how to solve this problem.
    If yes pls advice how can I change the password for user SAPJSF in J2EE. FYI I already tried changing the password for user SAPJSF using the offline config tool, Under cluster-data-> Instance_ID87066 I select the
    services com.sap.security.core.ume.service, then I select the ume.r3.connection.master.passwd, then the problem is inside the value option I'm not able to input the new password, neither I'm able to delete the old password, so the best thing I can do is Click on Set which opens a small window without any description with 2 options OK & Cancel, here I put the password same as R/3 password & save, after this I re-start the J2EE, but the same problem persists. Please advice on solving the problem.
    Trace file std_server0.out shows that the foll error message......
    Apr 28, 2005 8:09:47 PM com.sap.security.core.persistence
    [SAPEngine_System_Thread[impl:5]_23] Fatal: User Management Engine
    (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "Name or password is incorrect. Please re-enter". Connection data (obtained
    from properties of UME service in section "ume.r3.connection.master.": "{
    snc_qop=
    client=168
    abap_debug=
    snc_myname=
    gwserv=
    snc_partnername=
    ashost=CDBNTD03
    group=
    r3name=
    snc_mode=0
    gwhost=
    sysnr=00
    msserv=
    poolmaxsize=10
    snc_lib=
    passwd=********
    poolmaxwait=
    trace=
    receiverid_guest=master
    mshost=
    user=SAPJSF
    lang=
    receiverid=master
    Apr 28, 2005 8:09:47 PM com.sap.security.core.persistence
    [SAPEngine_System_Thread[impl:5]_23] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
    service com.sap.security.core.ume.service ================= ERROR
    =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Name or password is incorrect.
    Please re-enter at com.sap.security.core.server.ume.service.UMEServiceFrame.start
    (UMEServiceFrame.java:555)
    at com.sap.engine.frame.ApplicationFrameAdaptor.start
    (ApplicationFrameAdaptor.java:31)
    at
    com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:
    201)
    at com.sap.engine.core.service630.container.ServiceRunner.run
    (ServiceRunner.java:142)
    at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
    at com.sap.engine.core.thread.impl5.SingleThread.execute
    (SingleThread.java:73)
    at com.sap.engine.core.thread.impl5.SingleThread.run
    (SingleThread.java:145)
    Caused by:
    com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect. Please re-enter
    at
    com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3Persistenc
    eBase.java:1707) at
    com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init (R3PersistenceBase.java:1934)
    std_server0.out (16%)
    Thanks & Rgds,
    Abhishek

    Hi,
    have a look here.
    WebAS - invalid property value

  • Http server cannot start after running the following JSP

    Hi,
    I have 9iAS 1.0.2.2 and it has been working fine.
    My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
    I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
    I also check the oci.dll files, and I have the oci.dll file in the following directories:
    c:\oracle\ora81\BIN 87KB
    c:\oracle\806\BIN 38KB
    c:\oracle\iSuites\BIN 87KB
    I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
    806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
    The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
    Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
    OR
    the OCI.DLL file is corrupted in one of the above directory.
    Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
    I really appreciate if someone could give me some pointers about this.
    Thanks;
    Kelly.
    <%@ page language="sqlj"
    import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
    e" %>
    <HTML>
    <HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
    <BODY BGCOLOR="white">
    <% String empno = request.getParameter("empno");
    if (empno != null) { %>
    <H3> Employee # <%=empno %> Details: </H3>
    <%= runQuery(empno) %>
    <HR><BR>
    <% } %>
    <B>Enter an employee number:</B>
    <FORM METHOD="get">
    <INPUT TYPE="text" NAME="empno" SIZE=10>
    <INPUT TYPE="submit" VALUE="Ask Oracle");
    </FORM>
    </BODY>
    </HTML>
    <%!
    private String runQuery(String empno) throws
    java.sql.SQLException {
    DefaultContext dctx = null;
    String ename = null; double sal = 0.0; String hireDate = null;
    StringBuffer sb = new StringBuffer();
    try {
    dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
    "tiger");
    #sql [dctx] {
    select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
    INTO :ename, :sal, :hireDate
    FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
    sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
    sb.append("Name : " + ename + "\n");
    sb.append("Salary : " + sal + "\n");
    sb.append("Date hired : " + hireDate);
    sb.append("</PRE></B></BIG></BLOCKQUOTE>");
    } catch (java.sql.SQLException e) {
    sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
    } finally {
    if (dctx!= null) dctx.close();
    return sb.toString();
    %>

    Hi Jim,
    I have the same environment with almost similar problem, no IIS services being started, but HTTP_Server still failed to start. Below log:
    +10/09/28 23:35:04 Start process+
    +[Tue Sep 28 23:35:06 2010] [warn] pid file c:/oracle/frhome_1/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous+
    Apache run?
    ap_spawn_child: Bad file descriptor
    Couldn't fork child for piped log process
    Regards,
    Chai
    Edited by: user13350226 on Sep 28, 2010 9:14 AM

  • 10g listener cannot start after install 11g

    Hi,
    I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
    But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
    of windows to 11g home directory.
    But when I reboot my server, I found that the old 10g listener cannot be started,
    the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
    So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
    And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
    Is this a normal behaviour to have 11g and 10g co-exists in one server?
    Thanks
    Vincent

    pj**** wrote:
    Hi,
    I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
    But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
    of windows to 11g home directory.
    But when I reboot my server, I found that the old 10g listener cannot be started,
    the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
    So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
    And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
    Is this a normal behaviour to have 11g and 10g co-exists in one server?
    Thanks
    Vincentonly 1 listener is needed on any DB Server & the listener should be for the highest version of Oracle DB Server

Maybe you are looking for

  • How to set a date value at netui:hidden/ tag bind to a RowSet item/property through a form bean?

    Hi, I have the following urgent problem. I created a pageflow which uses a form bean (created with a db control) to insert values in a table. I overcame the disability to insert date values in the table by converting this columns to string values in

  • Hierarchical tree

    Hi All, I have created a tree and populated it with data. I populated the tree upto the depth of 4 using Add_tree_node method. I have written a code on the trigger when_tree_node_selected. The code gets the value of the tree node and insert it into a

  • Documentation in Integrated Planning

    Hi All, For the documentation in BPS there is an easy way of getting the object list, ie, from the Object overview in transaction BPS0. Is there a similiar way to do the same in BI Integrated Planning.Is there one table which will give the list of ob

  • SQL Developer - displaying double byte (Japanese) characters

    I have installed SQL Developer on an English Windows XP system with Asian regional support installed. SQL Developer > preferences > database > set language, territory to Japan/Japanese. The strings are displaying as square boxes which means the chara

  • The "Restore Down" button doesn't restore down.

    In the upper right-hand corner of the screen (where the red X is), the middle button (Restore Down) doesn't restore down. How do I fix this??