ICI CCM Extractor - allocation of SolMan installation Number

Hi experts
When configuring the iCI extractors via the measurement platform setup, the installation number for the local solman is being picked rather than the installation number for the managed system.
This results in the extractor failing with a ''No Custom Code Objects found in XXX for CCLM' (where XXX is the managed system where the data should be gathered from).
Has anyone else experienced this or know how to change the installation number once the extractor has been created?
Thanks
Ian

Hi Alexander
Thanks for the quick reply.
Yes the AGS_CC* tables are filled and I get results when running the extractor FM manually via SE37 and putting the correct installation number and client in the import parameters.
So, is it usual to edit the E2E_ACTIVE_WLI table manually? I have done this as requested but just wondered if this was a routine operation when the numbers are incorrect?
Also, how can I manually trigger a new run as currently the next run is not until tomorrow morning.
Thanks
Ian

Similar Messages

ICI CCM Extractor - No Post Processor or Dataloader phases

Hi Experts
Related to the previous discussion on the installation number for the iCI CCM Extractor, even if the installation is correct, I do not get any data in the 0SM_ESRSG cube even though records are returned from the extractor.
This, I believe, is because there are no phases for the Post Processor or Data loader
When I backtrack to when the extractor was failing due to an invalid interruption in database activity error, the phases are there. The only change made is the application of note number 2120133 to address this.
This was why I deleted and recreated the extractor previously, only to find it failing with the wrong installation number.
Is there a way to check for the execution of the post processor and data loader and trigger it, or can it be done manually if it fails?
Thanks
Ian

Hi All
Update on the above. Note 2120133 changes the structure definition of the work area wa_data to cope with 255 characters rather than 100 characters.
However, the entries in E2E_ACTIVE_WLI for the data loader must be SMD_DATA_LOADER255 and the entry for the mainextractor must be E2E_ME_RFC_ASYNC_NO_RR_255.
Mine were mismatched and there was a dump in ST22 behind the scenes when the post processor FM E2E_ICIDB_CCLM_PP was being called. No error in the EWFK to be seen though as you can see above.
Anyway, hopefully this is now solved but I will confirm tomorrow. The manual execution via E2E_ME_RFC_ASYNC_NO_RR_255 completes which at least gives me hope!
Thanks
Ian

Service Desk Issue in SolMan 4.0 - Installation Number differrence

Hi all,
I am in the process of setting up Service Desk in SolMan 4.0. When I create a message in my satellite system, the message is sent successfully and appears in my Solution Manager. However, I have red light appearing. This is because I need to provide Sold-To Party and Reported By Business Partner entries in the support message. My understanding, please correct me if I am wrong, is that these entries can be automatically filled based on iBase information. I have followed the IMG to setup the iBase.
Upon further investigation, I noticed the following problem. My installation number in the satellite should be XXXXXXXXXX, this is reflected in the System Landscape and iBase. But, when I look at the SAP Attributes tab in the Support Message, the installation number is YYYYYYYYYY. I think that this difference is a possible cause of my problem at hand.
This was the problem as there was an entry in table BCOS_CUST with YYYYYYYYYY in the satellite system. Can anyone tell me where this entry came from? Could this be from configuration of Service Desk?
Thanks,
Robert

Thank you very much!
The problem is solved!
Im my case was necessary to apply SAP Note 1055630.
I have assigned the role "SAP_SM_S_USER_GRP" to the user with RFC_READ connection, refreshed the last alert in DSWP and tha is.
regards!
Thom

SAP customer number unknown for installation number

Hi There,
We're facing some problems after a reconfiguration of some things in Solution Manager. We have SAP EHP 1 for SAP Solution Manager 7.0. Have made two days ago the installation of the latest SP, but not the kernel yet.
The problem is in the job SEND_SYSTEM_RELATIONSHIP_TO_SUPP. The error is:
08.01.2010 10:43:24 Job started                                                                                00           516          S
08.01.2010 10:43:24 Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant , user ID SOLMAN_BTC)      00           550          S
08.01.2010 10:43:24 SOL determined as monitoring Solution Manager system                                      AI_SC_EN        075          S
08.01.2010 10:43:24 SAP customer number unknown for installation number 00XXXXXXXX               AI_SC_EN        097          E
08.01.2010 10:43:24 Job cancelled after system exception ERROR_MESSAGE                                           00           564          A
The info about the system:
solman:soladm 21> disp+work
disp+work information
kernel release                701
kernel make variant           701_REL
compiled on                   HP-UX B.11.23 U ia64
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Feb 24 2009 21:53:01
update level                  0
patch number                  32
source id                     0.032
supported environment
database (SAP, table SVERS)   700
                              701
operating system
HP-UX B.11
Thanks,
Joao

Hi João Cesar,
I´m faccing with the same error... I installed the solution manager Ehp1 and it have SPS20 applied which correspond to ST 400 level 20 (SAPKITL430).
When I am in transaction SMSY in section Systems and I press the button "READ SYSTEM NUMBER" is shown an error message that says "SAP customer number unknown for installation" the details of help says:
Diagnosis
Installation number &V1& that is assigned to some system(s) in transaction SMSY is not assigned to an SAP customer number in table AIINSTALLATIONS.
Procedure
Please check the log of background job REFRESH_ADMIN_DATA_FROM_SUPPORT for errors.
So, when I entry in that job log I found this error:
No customer numbers maintained in view V_AISAPCUSTNOS   | AI_SC_EN   | 106
Then I went in table/view V_AISAPCUSTNOS and inside does not contain any data!!!
All the notes I found were related to lower versions and so I could not implemented the snotes corrections!! Any notes for my release that are related with this problem?
Joao Cesar what you did for solve this problem??? You didn´t mentioned!! You only mentioned that you implemented some notes.. but which ones?!!?

Different installation number sent from satellite system

Hi there, I have a strange one. When I create a Support Desk Message in the satellite system, the message is correctly created in Solman Service Desk, but the installation number sent is different than the installation number displayed in SLICENSE (for sat. system). This totally stuffs up my iBase & Partner determination. Any ideas as to why the installation number is being sent wrongly?

Hi,
check your Installation Number and other details, in <b>SMSY, Message Source, Data Source</b>.
Hope this solves your problem.
Feel free to revert back.
--Ragu

Problem to chang Installation number permanently on SMSY.

Hi All,
I have a sap installation on my SMSY. The installation number for this server is correcet on SLD, at SAP Support portal and on own installation. But wrong on SMSY. I can chang this number to correcet one but efter some time it changing back to the wrong one.
On SolMan, run tco SMSY_SETUP for SLD . Efter schedules the job LANDSCAPE_FETCH correcet.
Any idea what it can be?
Regards

Hi
Seems Someway the data from SLD is not properly reaching the SMSY for the particular system Check the SLD data for the particular SID again.
Does that fine, if yes
Goto Solman system ,remove all the system wrong entries from smsy
then goto ur satellite system use the tcode RZ70, and pick your sld address and scedule the job there
now come to smsy_setuo and enter the sld details after schedules the job LANDSCAPE_FETCH .
This clears the wrong entry.
Please check
Jansi

MOPZ: no System in SMSY for the installation number 1234567879 found

Hi!
Within SOLMAN MOPZ by opening a new maintenance action I get the following error:
no System in SMSY for the installation number 1234567879 found
Question:
How can I find this installation number within SMSY and solve the problem?
Thank you very much!
regards

Hi,
the question still is:
how to identify the system that currently has this installation number?
When I go to SMSY --> Landscape Components --> Systems and search for the installation number I get no results.
I think that this system no longer exist in SMSY...
Any idea how to proceed?

How to get installation number?

Hi,
I would like to read the installation number of a SolMan system via function module/BAPI.
Can you help me?
THanks.

For those who want to know:
Use function module SLIC_GET_LICENCE_NUMBER to get the installation number...

How to find Installation Number in R3 to create Technical system in XI.

Hi,
how to find Installation Number in R3 to create Technical system in XI. can you please help me out.
thanks
siva.

Hi Siva,
Host name you can find at same location. Not sure about message server port (Basis team shall be able to provide this information)....
However there is a very simple way fo creating technical system..
Check out this Michals blog...its very easy
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Nilesh

Installation number and client copy

Hi Gurus,
Is client copy possible between two systems which has got two different installation numbers?
This is a very basic question I know, but i don't see any other source of information. Even the client copy pre-requisites doesn't tell anything about installation number. Hence could anybody who has already experimented tell me about this.
Thanks and Warm Regards
Syam

This question was answered by Gopalan Narayanan. Thanks Gopal
Client copy between different installation number systems is possible.

Fetching Supply Scenario based on Installation number ?

Hi All,
I have got an installation number. Can anyone give me the table names from which i can get the installation's supply scenario ?
Thanks,
Hrushikesh

Hi Hrushikesh,
You are talking about the Supply Scenario field in the ES32 transaction. There are following scenarios
001 -Grid Usage for Points of Delivery Supplied By Third Party
002 -Supply for Point of Delivery in External Grid (Tranmission)
003 -Supply for Point of Delivery in Own Grid (Fully Supply)
Usually we choose to keep this field as blank as it keeps on changing with each contract.
It usually tells whether the installation is currently associated with the Retailer or Distributor. You can find that through Service Provider and Invoice Service provider at contract, that in which scenario installation is. But you can choose to keep this field blank also.
Regards,
Manish Bisht

Installation number Of Xi is INITIAL

Hi all
Installation number of XI is initial in XI server so is it make any diffrance while creating Technical system and Business system. Cuase while I am running one IDOC to File scenario it shows mw that PARTY_SERVICE is not avaiable so is there any relation of Installation number with PARTY_SERVICE.
Please guide me
Regards,
Hiren Patel

HI
Thrad was not closed that's answare is in the response of questation ask by <b>Daniel La Rista</b>
Reg,
Hiren Patel

SLD: Duplicate Technical System after Installation Number change

We changed the installation number for a system. After this, inside SLD there are 2 entries for this system, with 2 different installation number (new and old). What is the correct procedure to remove one of the entry (old one).
Please advise.
A proper SAP note would be appreciated.
Thanks

Its ok even if you have forgotten to register to the SLD during installation.We can regaister after installation.Since SLD runs on java engine then if you go to http://<ipaddress or hostname of the server>:5<instancenumber>00/sld
If you go into that you can click on administration button and follow the instructions as in the link.
http://help.sap.com/saphelp_nw70/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.html
Difference between technical systems and business systems is that business systems are used in PI/XI.Whereas technical systems are nothing but your ECC , CRM etc.You have to use business systems only when there is a case for connecting to XI/PI.Hope i have answered your quesries if not please let me know.

Java Licensing changing installation number

Hi all,
we have changed contract and moved a Netweaver Java installation into a new server. The license check fails since the hardaware is changed.
I have asked a new license key but it does not work since the system was installed in a different installation number.
Do you know if there is a way to install a new license with a different installation number ?
Thanks in advance.
Andrea

If you change the hardware, the hardware key changes and you need to apply for a new license. But in the meantime you can use a temp license. SAP note 174911 explains this.
The change in the installation number also implies a change of the license and possibly a migration key for the secure storage of the system, as described in note 816861.
Regards,
Désiré

SLD error in Installation Number

Hi colleagues,
I have install de SLD in the Portal 2004S. I connect to the http://server:50000/sld.
When try configure my System Landscape, in the Installation Number I have a error.
The error is "Installation number must have exaclty 10 digits, or the value INITIAL".
In the transaction SLICENSE the numeber is the same.
Regards Victor.

Hi,
well....
Out installation numbers all beginn with zeros...
Why don't you connect your systems to the SLD with the wizards from inside the systems? In ABAP call TX SM70 and in JAVA use Visual Admin and goto server >> SLD Provider.. This will insert all necessary data automatically.
Hth,
Michael

ICI CCM Extractor - allocation of SolMan installation Number

Similar Messages

Maybe you are looking for