Icloud crash on windows

Each time I start my Windows 7 Pro laptop, I get a message that iCloud has crashed and there is no known solution.  I'm assuming that there is a conflict with some other app (maybe SugarSync) on my PC.  Anyone aware of a solution?
Fred

Uninstall and then reinstall the iCloud control panel on your computer.

Similar Messages

  • How can I check my icloud emails using windows xp?

    My MacBook Pro crashed and I am currently using an old laptop on windows xp. When I go to enter online in Icloud.com my emails it does not allow me to see my emails unless I install icloud on my laptop. The problem is that when I follw the directions and the relevant link it sais that icloud is compatible only with windows 7 or 8. Does that practically means that I will not check my emails until my mac is back in life?

    Thank you for the answer
    I am trying to access my emails using my browser but when I enter my ID and password a message appears saying that I need to set up icloud first in my current device before I can make use (enter) icloud.com
    Then I pressed more info to find out how I can do that in a windows pc and I found out the following:
    ''To enable iCloud on your Windows PC (Windows 7 or 8 required), first step set up your iCloud account on your other devices or Mac, then install iCloud for Windows''
    Any suggestion?

  • HT5925 AppleIEDAV.exe crashes everytime Windows 7 64 bit opens

    AppleIEDAV.exe crashes everytime Windows 7 64 bit opens. Any ideas?
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AppleIEDAV.exe
    Application Version: 1.2.12.0
    Application Timestamp: 52867716
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.1.7601.18247
    Fault Module Timestamp: 521ea8e7
    Exception Code: c0000005
    Exception Offset: 0002e41b
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    This just started to happen. I'm using IE 11. Of course.. Safari is dead.
    Thank you!

    Remove or uncheck Bookmarks in your iCloud control panel. That is what is causing most of the problems. At least that is what I've been able to gleen from reading other posts here in the forum.

  • ICloud crashes my explorer.exe

    Hey,
    So basically, everytime i set up my iCloud Control Panel for only the Photo Stream thingy, whatever folder i try to open computer, control panel, documents, my explorer.exe always crashes until i unistall it. Im running Windows 7 32-bit and my iPhone 4 running iOS 6 is syncing the photos.
    Would any know what the problem is?

    I had this same problem (iCloud for PC - Windows 7).  For me, Photostream stopped syncing properly over a year ago, and after a recent iCloud (PC) update, I couldn't even log into iCloud anymore.  It would crash every time during the log in process.  I tried everything I could think of (installing, reinstalling, etc.).  I had pretty much given up and stopped using iCloud since last Fall.  I'm happy to report now that I have fixed it.  I know this is an old thread, but I'm leaving this here in case someone else comes across it (which I'm sure they will).
    Other people who have had this problem mentioned something about having to reinstall Outlook to fix it.  Maybe that would work for some people, but since I don't have Outlook, that wasn't going to work for me.  Here's what did work: I disabled the Apple Push program from starting up with my computer.
    In case you don't know how to access that, go to your Start menu, and type "msconfig" in the Search box.  Once you hit Enter, the System Configuration tool should open up.  Click on the Startup tab, and you should be able to see all the programs that startup with your computer.  Uncheck Apple Push (along with any other program you want to disable), and hit OK.  You will need to restart your computer for the changes to take effect.
    What does Apple Push do, and is it safe to disable?  Supposedly, it helps your iDevices communicate with iCloud, etc.  I can tell you right now that my iPhone communicates with my computer fine (better actually, since it's finally letting me log into iCloud and see my Photostream properly now) with it off.  After some internet sleuthing, I've actually found that many people recommend you turn it off to help your computer run faster.
    This wasn't something that I was actively looking to do when I found out that it worked.  I had pretty much given up on having access to iCloud on my computer.  I had another program that I wanted to disable from starting up automatically, so I went into System Config, and it was there that I noticed that Apple Push was even a thing.  Anyway, I unchecked it (since I wasn't going to use iCloud anymore anyway), and then restarted my computer.  Since iCloud was back on my mind, I decided to try logging in again.  I didn't have any expectations when I did, but lo and behold!  It actually worked!  To top that off, Photostream was syncing again!
    Anyway, hope this works for you!  Good luck!

  • Can I use iCloud on two Windows 7 PC's? (same apple ID)

    Hi!
    I am a new user of Apple products and would like to use iCloud on two Windows PC's to upload Pictures and be able to see them on iPad. I manage to setup one computer and upload a few pictures for test and it worked, however when I setup computer number 2, nothing happens after I put the pictures on the required location to upload.
    Please let me know if this is feasible and if is not, what do I need to do to enable computer number 2 as the one to use and disable using computer 1 (the one working so far)
    Regards

    You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher.  After creating your account on one of these devices you will then be able to sign into the account using your iCloud ID on your PC.

  • Application crashes in Windows 7 64bit made in Labview 2010 sp1 f2 with Fault module name%3A lvrt.dll%2C version 10.0.0.4033 and exception code c0000005

    I build an application exe and then its installer along with run time environment.
    The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash. 
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AGMS.exe
    Application Version: 1.3.0.0
    Application Timestamp: 4c24e8f5
    Fault Module Name: lvrt.dll
    Fault Module Version: 10.0.0.4033
    Fault Module Timestamp: 4c9273f4
    Exception Code: c0000005
    Exception Offset: 00005310
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
    Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: Dell System XPS L502X
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
    Memory: 8192MB RAM
    Available OS Memory: 8106MB RAM
    Page File: 3457MB used, 12753MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
    Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
    Language: English (Regional Setting: English)
    System Manufacturer: LENOVO
    System Model: HuronRiver Platform
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
    Memory: 4096MB RAM
    Available OS Memory: 4010MB RAM
    Page File: 1359MB used, 6658MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
    This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
    Now as I see it, it could be a Run-time environment mis-match error.
    For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
    I checked DEP, for all 3 PCs and it was set to the following
    Turn on DEP for essential Windows programs and services only (first option).
    I am confused. I can not find a solution for this and it is really frustrating.

    But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
    Since from the picture you can see its including the support installers from '\Program Files (x86)\'
    The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
    I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
    Yes I did reboot every time after I ran the installation.
    Still getting the same error.

  • Firefox was working fine in the morning, after half a day, it just crashed and now every time i try to start FF it crashes, i reinstalled FF, even tryed FF 4 beta, every time same crash report window, and nothing happens.

    After a half day working normally, FF just crashed, and now i reinstall it, even tryed FF 4 beta, and still getting crash report. Cant even start in safe mode, same crash report window pop up.
    Checked for viruses, malwares. Nothing helped.

    Other applications print okay? If so, try deleting the Preview .plist
    You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~`/Library. Delete the .plist(s) for the application.
    If you prefer to make your user library permanently visible, use the Terminal command found below. It does work with Mountain Lion:
    http://osxdaily.com/2011/07/22/access-user-library-folder-in-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

  • I'm getting popup notices that Firefox has a problem, and Windows is looking for a solution; then it closes Firefox and says Windows will let me know if it finds a solution. No crash report window comes up.

    Firefox is my default browser on my new laptop, with OS Windows 7. I've now had several instances where a Windows popup comes up saying Firefox has developed a problem and may have to close. It also indicates Windows "is looking for a solution to the problem." No solution is found, however, and Firefox is forced to close, with the happy notice that Windows will let me know if it finds a solution to the problem. If there is any tech data on the crash, I'm not sure where to find it, and no Firefox crash report window comes up. I thought it was an anomaly the first time, but this has now occurred at least 4 times in the past several days.

    See:
    * https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

  • How do I get iCloud on my windows xp pc

    Apple, this annoys the **** out of me, why can't I get my photos and videos that I take with my iPhone 4s onto my pc just by syncing to my iTunes. My phone uploads photos to the iCloud but where the **** is that as my iTunes doesn't show anything about this. How do I get iCloud on my windows xp pc. It shouldn't be this difficult to do surely. You give us a great camera to use on our phone but then make it impossible to load them onto the computer. Please help as android is calling

    Windows XP is not compatible with iCloud, you need Vista or Win 7

  • I have reloaded Icloud on my Windows 7 PC and it just says it stopped working and closes the program after I enter my apple password, what can I do?

    I am unable to use Icloud on my Dell PC. I have uninstalled it twice and reloaded it. When I enter my Apple password, it tells me that it has stopped working and closes the program. What can I do to correct this.

    Hi MamaTabs,
    If you are having issues signing in to iCloud on your Windows machine, you may find some of the troubleshooting in the following article helpful:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/ts3988
    Also, you may want to make sure that you are running the most recent version of iCloud Control Panel for Windows:
    Apple: iCloud Control Panel 3.1 for Windows
    http://support.apple.com/kb/dl1455
    Regards,
    - Brenden

  • Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

    Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

    You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

  • HT201317 When I go to log onto iCloud using my Windows 7 and it asks for my login information, I get the error saying my Apple account is valid but not an iCloud account. How do I get an iCloud account? Thank you

    When I go to log onto iCloud using my Windows 7 and it asks for my login information, I get the error saying my Apple ID is valid but not an iCloud account. How do I get an iCloud account?
    I don't have any apple products personally, this is for work to use Photo Stream so when Superintendents & Project Managers take pictures of their construction site, I am able to have those images immediately.
    Thank you

    You can not create an iCloud account using a PC, you will need an Apple product. Once the account exists you can logon to it from a PC.

  • I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    Same issue here,  previously did work perfectly

  • Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.

    Team,
    Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.
    I have tired.
    1. Updating Intel Graphics Card. (unsuccessful)
    2. Logging in and out of creative cloud. (unsuccessful)
    See log below.
    Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
    Faulting module name: ntdll.dll, version: 6.3.9600.17278, time stamp: 0x53eebd22
    Exception code: 0xc0000005
    Fault offset: 0x0000000000024ac8
    Faulting process ID: 0x1448
    Faulting application start time: 0x01cfe6c7bd37e765
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
    Faulting module path: C:\windows\SYSTEM32\ntdll.dll
    Report ID: 072b7ff9-52bb-11e4-825f-600292e27add
    Faulting package full name:
    Faulting package-relative application ID:

    Well it came installed on my brand new Windows 8 pro w530 I received 4 weeks ago and has never worked. When you try to open power manager it just crashes. If you uninstall it the Lenovo software just keep reinstalling it. If you uninstall the Lenovo PM driver but do not reboot you can then open Power Manager. The minute you reboot the Lenovo software reinstallls the driver. 
    Why would Lenovo install software on a brand new Windows 8 laptop that is broken and useless? Tech support is absolutely no help they transfer you to the software department which wants to charge you to fix a problem that Lenovo created!!! It is crazy!! I was hoping someone here could solve this problem or maybe someone at Lenovo would see this and get the problem resolved. Tech support has been useless. I reported the problem to them at least 5 times.

  • How do I STOP receiving Email notifications on my iPhone, notifying me about every time I login regularly, to iCloud etc via windows computers?

    How do I STOP receiving Email notifications on my iPhone, notifying me about every time I login regularly, to iCloud etc via windows computers? Ta.

    go>setting>notifications>mail>turn allow notifications off

Maybe you are looking for

  • Stock report with date range

    Hi Experts. Material stock report (unrestricted, blocked, quality) with in date range. getting information in T-CODE:  MB52 but not in date range. In mard table i did't find the date for unrestricted, blocked and quality. from where can i get that in

  • [SOLVED]can not get steam to work.

    Hi! It seems like my steam install from the official repo will not start at all. plus, it nearly says nothing at all [the-doctor@Tardis steam-runtime]$ steam shell-init: error retrieving current directory: getcwd: cannot access parent directories: No

  • Please help me about joins

    Can anyone please tell me in real environment, generally people use 'joins' or 'for all entries' in select stmt ..... Eventhough 'for all entries' is used for performance in which case 'joins' will be used? Pleaseeee give me the info.. Regards Yuktha

  • How to connect outlook by iview

    Hi, Is it possible to connect Outlook by iview? If it's possible, how to do that? I think it's not possible to connect a application, like Outlook, on a client machine by a web-page, including iview. Am I wrong? Could anyone please teach me how to do

  • Using special characters

    How do you enter special characters (such as curved quotes) in a headline that is in caps? I have tried using the formula "alt +) or alt + Shift + ) and get no result. If I do the same in a paragraph of regular text, it works. Thanks.