Icloud for Windows won't install on my Windows 8 laptop

Install Interrupted keeps popping up.

I had a lengthy chat with the Apple Support Team. During this I uninstalled iTunes and it's following bits, uninstalled iCloud 3.1, reinstalled iTunes and attempted to install iCloud 4.0 - but again the installation was interrupted. This happened with or without Nortons 360 Smart Firewall and Auto Protect enabled. The technician wanted me to completely uninstall Nortons but I drew the line at that - nothing to suggest Nortons was at fault. Interestingly, after I shutdown and restarted my PC, iCloud 3.1 was still there and operating properly even though it was not showing in the Control Panel list of programs - go figure.
I also had a session with a technician at the Genius Bar at our local Apple Store. He searched Apple's knowledge base but came up empty.  He thought it best to wait until Apple have gotten iCloud Drive established for the Mac and the bugs ironed out and then try again.

Similar Messages

  • Itunes won't install on my windows 7, 64 bit puter.

    itunes won't install on my windows 7, 64 bit puter. Repeated tries. It rolls back and cancels midstream.

    Hello rotgerius
    Check out the article below to troubleshoot issues with iTunes installing on your computer.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    -Norm G.

  • ITunes won't install on my windows 7 computer.

    iTunes won't install onto my windows 7 computer. Any suggestions?

    Hello, billymeck. 
    Thank you for visiting Apple Support Communities. 
    You may find this article helpful in troubleshooting the iTunes installation issue you are experiencing.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    If iTunes has been previously installed, I would recommend completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, attempt a download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling, follow the steps in the article below. 
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H. 

  • New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    Hello SandyJeanne,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Recovery = Windows won't install from recovery discs

    I have a dv6, performed recovery off the purchased 2 discs, and it says Windows won't install.  Also, will not let me log into administrator...says my account has been disabled.  Need help asap, on roomies pc.

    I also tried using a HP Windows Recovery Disk from HP for my HP G71-340US Notebook Computer, but it repeatedly fails the installation with the message:
    "No OS Flag Set on Unit.  Please use EEPROM to set OS SKU value = 2.  Error RStone S Update  SRU option configuration is invalid, Loc # cound not be found in product #.  Next step: Please use EEPROM to set Loc # in either SKU # or CTO localization code". 
    This occurs repeatedly when trying to run the Recovery Disk from HP.
    I believe there is an EEPROM problem, but I do not know what to try next.   I have backed up all my persoal data, but everything is wipped off the hard disk, currently.  I can get into the BIOS, but that does not seem to be of any help. HP tech support is of no help.
    Thanks for any help or recommendations.
    Dan

  • ICloud update for Windows won't install

    I keep getting the Apple update dialog that states there is an update for the iCloud for Windows application.  I've tried installing from there, downloading the update from Tools -> Download and even downloaded to whole setup file from iCloud.com.  ALL of them fail with the error that there is a problem with the files and it immediately rolls back the changes.
    This happens on my desktop with Windows 7 and my laptop with Windows 8.
    Any suggestions?

    When trying to install iCloud for Windows in Windows v8.1 64 bit I get the error:
    "The installer encountered errors before iCloud Control panel could be configured.  Your system has not been modified.  To try these operations at a later time, please run the installer again"
    I have disable the Anti Virus, removed other Apple apps, re booted the system and have tried the installer several time from several sources. THEY ALL FAIL.
    Excerpt from Event Viewer;
    Product: iCloud -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action RuniCloudUpgrade, location: C:\Program Files (x86)\Common Files\Apple\Internet Services\, command: C:\Program Files (x86)\Common Files\Apple\Internet Services\iCloud.exe /upgrade
    My stystem does not have a C:\Program Files (x86)\Common Files\Apple\Internet Services floder

  • ICloud for Windows won't install

    When trying to install iCloud for Windows I get the error:
    "The installer encountered errors before iCloud Control panel could be configured.  Your system has not been modified.  To try these operations at a later time, please run the installer again"
    I am using Windows 7 64 bit, Itunes 10.5 64 bit. My iPhone 4 and my iPad 1 both have iCould installed OK.
    I also tried to "run" as administrator - same error.
    Any thoughts?
    Abe

    When trying to install iCloud for Windows in Windows v8.1 64 bit I get the error:
    "The installer encountered errors before iCloud Control panel could be configured.  Your system has not been modified.  To try these operations at a later time, please run the installer again"
    I have disable the Anti Virus, removed other Apple apps, re booted the system and have tried the installer several time from several sources. THEY ALL FAIL.
    Excerpt from Event Viewer;
    Product: iCloud -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action RuniCloudUpgrade, location: C:\Program Files (x86)\Common Files\Apple\Internet Services\, command: C:\Program Files (x86)\Common Files\Apple\Internet Services\iCloud.exe /upgrade
    My stystem does not have a C:\Program Files (x86)\Common Files\Apple\Internet Services floder

  • Application (WMF 3.0) won't install during maintenance window, but will install when there is no maintenance window

    Hi All,
    I'm just getting into the Application model in SCCM 2012 R2 and I like what I see so far, but i'm running into an issue.  When i set up an Application for WMF 3.0 with a prerequisite of .Net 4.0 and deploy it to a set of test systems that do not have
    any maintenance windows applied to it, it works great.  If it doesn't have .Net 4.0 it installs both that and WMF 3.0 and reboots.  If it already has .Net 4.0, it will skip that and just install WMF 3.0 and reboot. 
    However, if i deploy it to systems that have a maintenance window applied, the application recognizes that it needs .Net and WMF 3.0 or just WMF 3.0, but it never actually runs. 
    Here is the applicable entry from the appintenteval.log, and i've bolded the line where it shows that WMF 3.0 is not installed
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Title = WMF 3.0, Direct seleted dependencies = ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 title=.Net
    4.0,     AppIntentEval    4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0    AppIntentEval  
     4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 :- Current State = Installed, Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = .Net 4.0    AppIntentEval  
     4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/Application_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0    AppIntentEval  
     4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/RequiredApplication_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NonCompliant, Applicability = Applicable, ResolvedState = Compliant, ConfigureState = NotNeeded, Title = ApplicationIntentPolicy  
     AppIntentEval    4/24/2014 8:20:19 AM    1768 (0x06E8)
    and here are the entries from the AppDiscovery.log that are relevant:
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558" AND Revision = 7)"    AppDiscovery  
     4/24/2014 8:20:19 AM    2776 (0x0AD8)
        Performing detection of app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.    AppDiscovery    4/24/2014 8:20:19
    AM    2776 (0x0AD8)
    +++ Discovered application [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, Revision: 7]    AppDiscovery    4/24/2014 8:20:19 AM    2776 (0x0AD8)
    +++ Detected app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.    AppDiscovery    4/24/2014 8:20:19 AM  
     2776 (0x0AD8)
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66" AND Revision = 12)"    AppDiscovery  
     4/24/2014 8:20:19 AM    2508 (0x09CC)
        Performing detection of app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.    AppDiscovery    4/24/2014 8:20:19
    AM    2508 (0x09CC)
    +++ Application not discovered. [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, Revision: 12]    AppDiscovery    4/24/2014 8:20:19 AM    2508
    (0x09CC)
    +++ Did not detect app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.    AppDiscovery    4/24/2014 8:20:19 AM  
     2508 (0x09CC)
       ActionType - Install will use Content Id: Content_c6b448d0-7b59-4796-bb29-3f7fbfa6e70d + Content Version: 1 for AppDT "WMF 3.0" [ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66],
    Revision - 12    AppDiscovery    4/24/2014 8:20:20 AM    2508 (0x09CC)
    I have a 2 hour maintenance window applied to this system.  From the serviceWindowManager.log:
    OnIsServiceWindowAvailable called with: Runtime:7200, Type:2    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
    No Service Windows exist for this type. Will check if the program can run in the All Programs window...    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
            Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14
    08:20:00    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
                Duration is 0 days, 02 hours, 00 mins, 00 secs    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
    FindBiggestMergedTimeWindow called with TimeStart=04/24/14 08:20:21 and TimeEnd=04/24/14 10:20:00    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
            Biggest Chainable Service Window for Type=1 not found    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
    I'm not sure what else to try next and appreciate any help anyone can offer.

    Thanks.  I checked that setting and i have it set to false, so i don't think that's it. 
    I've done a little more experimenting.  I've changed my maintenance window back to 30 minutes.  Prior to the MW opening, i'll run an application evaluation deployment cycle on the system.  It will show the system as required WMF 3.0 but since
    the MW isn't open, it won't install at the time. 
    When the MW opens, i'll watch the ServiceWindowManager.log and it sees that it's a 30 minute MW and that the run time is 15 minutes but it still says the program can't run:
    ActiveServiceWindow has 1800 seconds left    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    Program can run! Setting *canProgramRun to TRUE    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    OnIsServiceWindowAvailable called with: Runtime:900, Type:6  
     ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
            Biggest Active Service Window for Type=6 not found    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    Program cannot Run! Setting *canProgramRun to FALSE    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    OnIsServiceWindowAvailable called with: Runtime:900, Type:2    ServiceWindowManager    4/24/2014 2:22:32 PM    816 (0x0330)
    If however, i kick off another application evaluation deployment cycle on the system during the open MW, the deployment kicks off right away and finishes. 
    Program can run! Setting *canProgramRun to TRUE    ServiceWindowManager    4/24/2014 2:22:32 PM    2940 (0x0B7C)
    OnIsServiceWindowAvailable called with: Runtime:900, Type:3    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    No Service Windows exist for this type. Will check if the program can run in the All Programs window...    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
            Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14 14:20:00    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
                Duration is 0 days, 00 hours, 30 mins, 00 secs    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    ActiveServiceWindow has 1571 seconds left    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    Program can run! Setting *canProgramRun to TRUE    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    This is not the behavior i would expect.  I would think that if the client knows it has a pending application deployment that is required, when the MW opened up, it would start the install immediately or close to the beginning of the MW.  It shouldn't
    need to have an application evaluation deployment cycle kicked off during the MW. 

  • WIndows Won't install! and reboots instead!! HELP!!

    The current Windows I am running on is: Windows 32 bit OEM
    I am trying to install Windows 10 64 bit because I want to upgrade from 32 bit to 64 bit.
    I have already installed windows 10 ISO and mounted onto my usb and it works
    BUT! my Problem is when it loads, I see the logo and the loading sign for 10 sec. than its has a quick blue box thing saying:
    "there are problems on your computer and now it will restart"
    it won't let me enter into the installation page? if I took the usb out windows 7 still works.
    I am trying to run a clean installation on my hard drive, my hard drive is 500gb and I have 10gb ram running
    Should I manually re-format my hard drive before I run the windows 10 64 bit installation.
    Please help ! if anyone had run into this problem before, please help me ! DX

    Paul Adare is correct in saying that you cannot "upgrade" from 32-bit to 64-bit. You can, however, backup your files and reload them onto your PC.
    Given that you are able to boot Windows 7 after the failure to install Windows 10 Technical Preview, it is apparent that you are not formatting the drive during your clean installation. There are a number of potential issues an existing configuration can
    cause, such as preventing Windows Setup from registering boot files, modifying partitions, or moving an existing installation and data to the windows.old folder. I would recommend removing the partitions from your drive (note: this will erase any data remaining
    on the hard disk) during installation to ensure that Windows Setup has a fresh hard drive to install to. If you continue to experience errors, two other factors to take into consideration are:
    Does your system use a storage controller that requires loading a driver during Windows Setup?
    Is the hardware malfunctioning? Do the hard disk and memory pass testing software like Windows Memory Diagnostic or chkdsk?
    Reference
    this article for more information.
    Hessam
    Windows Outreach Team- IT Pro
    Windows for IT Pros on TechNet

  • Boot Camp  - Windows won't install

    Hi,
    I'm running OS X 10.10.2 on my iMac 7.1 (2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM). On completion of Boot Camp partition Windows 7 DVD won't install - I get a black screen prompting me to select boot mode. However, keyboard and mouse are disconnected at this stage leaving me powerless to do anything. There's nothing wrong with the Windows 7 DVD, I might add - installs perfectly when running Parallels Desktop 10/Parallels virtual machine. Can anyone tell me, how to resolve this annoying issue?
    Regards missil1

    missil1 wrote:
    Hi CellarDwellr,
    Thanks for your answer.
    Although my install DVD does indeed bear the "OEM" mark, I don't think the "OEM" is the root of the problem, as the DVD installed perfectly on my iMac by means of Parallels Desktop 10. Furthermore, I made a perfect and smooth installation of Windows Vista (OEM DVD) on my iMac some years ago by means of Boot Camp (running Snow Leopard at that time).
    Hence, I'm inclined to suspect this to be an OS X issue rather than anything else.
    Finally, I did comply with the Boot Camp manual on both occasions.
    Regards missil1
    You can't just compare your windows 7 oem to your old windows vista oem. There are many - probably hundreds - of oem versions out there. You probably have a limited notion of what "oem" stands for. An OEM version of Windows is a special version for a specific computer or models of computers and none of them are for Apple. Dell or HP might sell OEM versions of windows, tailor made to work with their models of computer. Which means they preinstall drivers specific for, say, a Dell Studio laptop. Often they will also force a partitioning scheme on a computer's harddrive as well. If it worked in Parallels, you were lucky.
    If you want to try Boot Camp again, use Boot Camp-assistant to delete your Boot Camp partition and start over.

  • Adobe Flash Player won't install on my Windows 8 computer

    All we get is a blank page when trying to install Flash Player. I've done all of the suggested actions on the Adobe site, but it still won't install.

    What browser do you use?
    See also http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html

  • Please Help! Windows won't install IPod Driver!

    My brother got a 2GB IPod nano and itunes and everything installs but when i plug in the IPod i get the install driver window. I click to intsall driver but it keeps saying it couldnt find anything to install (even when i have the disc the ipod came with inside). Its a Toshiba labtop. If anyone knows why the driver won't install or had the same problem please help! Thanks

    Hi brunos mum, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.

  • PCSuite for 6600 won't install on Thinkpad R52

    Just downloaded pc suite for my 6600.
    Install file says it's version 7.1.100.1248
    When I run the install it asks me where if i agree with the terms, then asks what directory to install to, then the start menu entry, then if i want the sdk, then if i want the audio/video converters.
    And that's it! The PC Suite for Nokia 6600 sits on the task bar, but won't maximise. The task manager shows two PCSuite_en.exe's and a Setup.exe. None are using any CPU.
    I've left it for half an hour, and still nothing happens.
    I'm using a Thinkpad R52, 1.5G ram, XP pro SP2. I have uninstalled my antivirus and terminated everything from the process list it will let me terminate.
    My user is an admin. I've rebooted, tried several times, still no good.
    Help! I need to back up my phone, it's stopped doing any audio indication of incoming messages, and I need to backup so I can wipe the whole thing.Message Edited by tankslappa on 26-Dec-2005
    08:51 PM

    Tried on another XP SP2 pc, that wouldn't install either.
    Tried again on the thinkpad, and for once terminated the setup.exe first, normally I terminate the pcsuite exe... That seemed to free it up and it completed installing.
    After the reboot it said it had completed installing, and that i should connect to my mobile using the systray mrouter thingy... It showed 3 different bluetooth "com" ports. com5,6 and 500. I tried them all. Individually and one at a time. Each time it says it can't find anything.
    I can pair with the 6600 no problem using the built in XP bluetooth software, so what gives?
    Also the pcsuite it installed says pcsuite for 6600 versio 1.1.0! What happened to version 6?! I downloaded this install from the link provided in this forum at the top in the "sticky" message!
    Should I give up and try and find some other software and just write off the nokia offering as cr*p?

  • CS3 for iMac won't install

    CS3 for iMac won't get past the "Application" disc. Installer calls for "Disc 1 to continue" but there is no such disc. Only "Application" and "Content" and neither of them will continue install

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4:
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Adobe flash player won't install on my Windows 8 computer !!! Help

    I own a Toshiba (new Computer) . I have Windows 8 already installed.  When I want to watch a video someone has sent me, it asks me to download Adobe flash player.  So when I click on download, the flash player screen comes up empty.   What is wrong?

    See if anything in here helps: http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html
    If not, tell us what browser you use.

Maybe you are looking for