Icloud wont upload my music from pc, and the bluetooth suggestion that the iphone gave me wont work either. can anyone help before i throw a tantrum???thankyou

I cant upload my music from p.c windows and android (samsung galexy 3) to iphone 4. and icloud isnt copying it either. very frustraiting and starting to regrete getting an iphone :-( please help if your able. Thankyou.

i just downloaded the itunes programe on my windows pc then plugged the iphone into the usb port and they all went straight over to the phone ( i did need to unplug the phone and then plug it back into the usb) but they went over without a problem

Similar Messages

  • HT4993 I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the mo

    I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???

    Settings > General > Reset > Reset Network Settings

  • After updating to snow leopard  and trying to delete mackeeper flash player will no longer work. Can anyone help me?

    After updating to snow leopard and trying to delete mackeeper, Flash player is being blocked and will not allow me to view utubes. Can anyone help?

    Here are instructions for eradicating MacKeeper - you may need to re-install it to uninstall it fully:
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    Regarding Flash - there are many reports on here that v13.x isn't working for a lot of people. distractme in the following thread posted instructions on how to install the previous version, which should work whilst Adobe work on a fix:
    https://discussions.apple.com/message/25430408#25430408

  • When I bootup first thing in the morning it won't have sound and boots in safe mode then if you reboot it works ok can anyone help

    The system has been restored and still does it

    Hmmm, bit of a hail Mary here, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. Or if toggling things brings it back.
    To find out if it's system wide or user specific, try this...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    Does Sound work in the new account?

  • My iPhone 4 just turned itself off and will not turn back on, won't connect to iTunes either, can anyone help

    Please help

    Have you tried resetting your phone?
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the  Apple logo appears.

  • I'm using windows 7 and working in office 2010. I have installed iCloud and I can't print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.

    I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
    Geoff

    I had a similiar problem, with my multiple devices.  I open iTunes and when all devices were connected I went to the info section on each device.  Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me.  You have to do this for each device.
    I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory.  Hope this helps.

  • All of my contacts, music etc has vanished from itunes.  have no idea why? can anyone help. apple replaced my iphone 4 handset today as it was faulty. i did sync the old phone before i gave it back to them. can anyone help?

    all of my contacts, music etc has vanished from itunes.  have no idea why? can anyone help. apple replaced my iphone 4 handset today as it was faulty. i did sync the old phone before i gave it back to them. can anyone help?

    Backup, backup, backup...
    T-21 wrote:
    Hello.
    I did not touch my computer the past week, I've only been messing with my laptop.  I had my computer off a whole day.  I turn it on, open iTunes, and everything is gone.
    Is your laptop a different computer than your computer?
    You have two computers?
    iTunes is missing everything from which one/both?
    I system restore.  Everything is gone.  None of my podcasts, apps, or music files are there.
    Do you mean you reinstalled the system from scratch?
    Yes, that tends to delete everything.
    Or you restored everything from a backup?
    Directions on where to go to download all past purchases?
    Selete Store on the left side of iTunes.
    Make sure you are signed in.
    Click on Purchased on the right side under Quick links to redownlaod your purchases.
    Then make sure to regularly backup, backup, backup all your important data .

  • I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Hey Ian
    That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Thank you for using the Apple Support Community.
    -Norm G.

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can I install Aperture on my new Macbook Pro. I am up to date with my Mac Pro, I have the Aperture 1 and installation disks but cant remember how I got to 3. Can anyone help?  Many thanks regards Alf

    I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
    Ive tried to download it from the App Store but it wants me to pay again.
    Can anyone help on how to install Aperture 3 on my new Macbook .
    Many thanks regards  Alf

    Then you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
    Aperture 3.4: May quit unexpectedly on launch after updating
    Regards
    Léonie
    BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar.

  • When I install, I keep getting Quicktime failed to initialize, reinstall.  i did this at least 10 times and still won't work.   Can anyone help?

    When I install itunes, i keep getting message that Quicktime failed to initialize, reinstall itunes.   I did this at least 15 times and it will not work.   Can anyone help me?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.

  • Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?

    Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?

    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

    I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

    Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
              Remember networks this computer has joined
    is checked.
    2. Follow the instructions in this support article under the heading
              Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    3. Reset the PRAM.
    4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    7. Repair permissions on the startup volume.
    8. Turn off Bluetooth and test.
    9. Reset the System Management Controller.
    10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
    Select the Power Adapter tab and uncheck the boxes marked
              Wake for Wi-Fi network access
    and
              Enable Power Nap...
    if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
              Enable Power Nap...
    11. Reinstall OS X.

  • Hi,My friend gifted iphone 4s that is  purchased in US and it is an unlocked version.I am in India and when I put my SIM it is still showing no service.Can anyone help me.

    Hi,My friend gifted iphone 4s that is  purchased in US and it is an unlocked version.I am in India and when I put my SIM it is still showing no service.Can anyone help me.
    Regards
    Chetan

    Find out exactly where your friend purchased it. If they did not get it directly from Apple, it was most likely hacked, not legitimately unlocked.

Maybe you are looking for

  • My MB Air is stuck on a grey screen each time I put my password in

    Hello, When I start up my MB Air and put my password in, it just goes to a grey screen and gets stuck there. Occasionally it does come on, but mostly it does not. I have a Macbook Air 2011 using OSX Mavericks 10.9.3 Here are some possible causes: I t

  • My built in webcam won't turn on

    my built in webcam will not turn on

  • Can anyone help me with my audio sync problem?

    Hi, I posted about this previously-- I have dvcpro50 footage that I loaded in with a panasonic deck (rented, don't have it anymore).. And in the browser, it shows that certain clips have audio sample rates at funky frequencies (46766.5hz).. As the vi

  • Is there a way to organise albums in date order

    In iphoto I could just scroll down my events and come to a date. I have a multitude of albums exported from iphoto into photos, but they are in random orders and I wanted to dispay them in date order, without having to manually dragging the album int

  • Showing content in another region on the same page using url

    Hello Experts, I have a page with two region, say region A and region B. Region B is a sql based report that shows rows of information about a set of files with the first column rendered as an URL for the actual file itself. On clicking this url the