ICM Script Editor 'Search' 'Find' function, won't stop. Bug? 8.5.2

Script Editor issue; UCCE 8.5.2
When I use the "Find Nodes" function in script editor, to find a string in 'all active scripts' the results are displayed eventually. Once displayed though, the search immediately begins again, preventing selection of any of the results.
It feels like a bug, & has a huge impact on usability of the search feature. It can also occasionally cause scripted.exe to crash.
I think it is likely because there are a large number of scripts in our environment, but there is no way around that right now.
I was considering opening a TAC, but thought there may be simple fix in the wild that someone could share here.
Is there a way to extend the refresh period for the search function? Or can the automatic refresh be disabled entirely?
Appreciate any help, thanks in advance.
Edwin

Were you able to find a fix for this issue or did you ever open a case with TAC? We are having this issue as well it seems along with another problem that recently started where certain updates that are made in CCMP load one at a time instead of as a bulk update in UCCE.
The example I was shown today by two end users was where one did an update of 93 Agent Desktops in CCMP and while viewing the other users Script Editor on an AW the update process to refresh the config within ICM occurred as normal then again and again for guessing around 92 more times in a row which basically stops all work in Script Editor till the config refresh is completed. It looks like it is loading only one update at a time instead of all of them at once. I do not know if this has to do with the type of resource being updated (in this case Agent Desktop settings) or not but it doesn't seem to happen with say Agent moves so far. So for a very large company like ours this can have a huge impact to script updates and configuration changes.
If you can update on how you either resolved this or if a case was opened what the number for the ticket was I can reference that with the support case I will be opening for this.
Thanks in advance!

Similar Messages

How to use search/find function in a whole book?

Hi,
New to indesign... working on a book file which comprises 25 chapters.
I'd like to do a final proof to ensure all double spaces have gone, all quote marks are right etc
Instead of opening each chapter and using "search/find" through each chapter, can i tell the "search/find" function through the whole book?
Appreciate any feedback
Thanks heaps

Apparently Adobe thought that would be more appreciated than a book-wide Search/Replace.
You can read all about CS5's new features, and their selection procedure, on http://indesignsecrets.com/michael-ninness-answers-indesign-cs5-critics.php. The "Book" feature doesn't even get mentioned under "Sorry, we didn't change that at all." Also make sure to read the comments -- it seems lots of people really want more book features.
If you're one of them (so it seems), you might want to pay a visit to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Queue priority ICM Script editor 8.5

HI,
Can some please let me know about Queue priority node wth example?
ICM Script editor 8.5

it changes the priority of the call in ICM, default is 5. but you can change to lower value say 4,3,2 based on customer.
i will give you 2 examples:
1. if any priority customer call in, you do DB lookup or any other thing to carried out that the customer is priority at should be treated as earliest.
so for priority customer you branch out the script and increase their queue priority by this node, and queue them to skill group, this will put them ahead from all the call with normal priority.
2. when Rona happens:
in case of customer is assigned an agent, and agent does not pick the call, RNA happens, and CVP will take back the call from agent and request requery to ICM.
in re query request you can increase the priority of the call take it ahead from all the normal priority call.
this will reduce customer to once again wait in queue.
~ Chintan
rate all helpful posts

IPThad won't stop bugging me to set up cellular data account

My iPad won't stop bugging me to set up a cellular data account even though setting is turned off. This is really annoying.

This worked for me. Thanks.
edited to add: it worked for a week and now the popup has come back even with airplane mode on.
this never happens w my ipad mini1 cellular. Ohwell.

How do I export a .dwg file so the Search/Find function can be used on it?

I have some .dwg files that my co-worker exported to PDF. It is crucial for me to have the ability to use the search or "Find" function in Reader. There are 11 different .dwg files exported into an 11 page PDF, but some of the were exported with different properties. I can search on 4 of them, but the other 7 are unsearchable. I believe my co-worker user Autodesk TrueView to export the .dwg files to PDF. So my question is what program I should use (I believe that TrueView is capable of what I am trying to do, but I'm not sure) and how should I set up the the settings before I export it to PDF. Thanks.

You need to contact Autodesk, almost no one here is likely to be familiar with what Autodesk can or cannot do.

Please help with an ICM script editor syntax question.

I need to modify a set variable node. What I have now is Call.PeripheralVariable8+".wav" and this works. What I need it to say is Call.PeripheralVariable8+anything+".wav" but when I insert an * for the anything it's seen as a multiplier. What's the syntax to do this? The anything I need to add is _9xxx where xxx are other numbers, but the _9 will be in all, if that helps any. Thanks in advance !!

You can use the concatenate() function to build up your string, as you no doubt know.
As far as the wildcard goes ... your intention must be to try to SET the call variable and later on test the call variable with an IF node. Is that right?
You would be able to test parts of the string using the substr() function - which is based on character position. If that is a fixed value that you know, it's easy. If it's not, you can first use the find() function to locate something (like the "_9"), returning the position, and then use the substr() function to pull it off.
Can you write some pseudo-code here to define exactly your intention? You can set up a dummy script and send a dummy call through using Call Tracer and watch the output to see how your code is working.
Regards,
Geoff

Question: search/find function and markers?

FCPv1 through 7 user, now being forced to decide between Avid and Premiere, so I have tons of questions, but I will start with this:
I need to search through my marker comments, but I notice the find function doesn't work while in the marker tab, nor does it give options to search through marker comments while in the project tab. Is this possible?
It was also be preferable that it brings up every instance of the keyword, and not just the next instance, I am not seeing that as an option either...
I am hoping I am just missing something and you guys can help clear it up for me.
Here is my workflow incase it will help answer the question:
I have a video clip, and I have to transcribe every single line of dialogue in the clip.
I need to be able to search these dialogue lines.
Boris soundbite does not work for this, as I need to see what is said, not find where certain things are said.
Using subclips was my original Final Cut Pro work flow, but premiere handles subclips differently, and match framing only matches back to subclips, and not source material like I need it to. Unless of course there's a setting that makes subclips match frame to source material that I am missing, I dug around and looked for one but didn't see anything.
Thanks.

StevenPhares wrote:
I need to search through my marker comments, but I notice the find function doesn't work while in the marker tab, nor does it give options to search through marker comments while in the project tab. Is this possible?
It was also be preferable that it brings up every instance of the keyword, and not just the next instance, I am not seeing that as an option either...
I am hoping I am just missing something and you guys can help clear it up for me.
Markers in Premiere Pro CS Next will have this functionality. I just checked it out. Sorry that this function was not included in Premiere Pro CS6.

Search/Find Function in Timeline?

In the project panel there are several different ways to search through all of your media to find specific clips. Is there anything similar for the timeline?
For example - I have a 30 minute sequence with 7 tracks of dialogue. Each clip of dialogue is labeled with a line number from a script. When a producer comes over and asks "Can you quickly go to line 416?"...I'd like to be able to quickly do that.
Avid has a function where you can perform a find in the timeline for specific file names - does Premiere have anything like that? If someone could help me out that would be great!

Peru Bob wrote:
Right click > Reveal in project
Hi Peru Bob,
I believe myhar is looking for a search function for the Timeline. She wants to search for a specific clip name and have the playhead jump to that clip, if I am not mistaken. Reveal in Project is when you know where the item is in the Timeline, but you want to find it back in the Project panel.
Cheers,
Kevin

EasyDMS 7 - Error in search / find function

Hi Folks,
When I click the "find document" button EasyDMS 7 the find dialog box does not display the classification and object links tabs. It also does not show a drop down for document type. Once I enter a search term and click OK, I get the following 2 error prompts.
1. Function BAPI_DOCUMENT_GETMULTIDETAIL does not exist!
2. Unspecified error
Wondering if anybody else bumped into the same issue. My version is 7.0.3.1: (Unicode)
Thanks,
Lashan

Hi,
There was a bug in earlier versions of easydms that if you rest rfc cache from the "traces' dialog box, the reset was not proper. In that case you need to reset from "preferences". This is fixed with current sp's of easydms. hope this helps!
Thanks,
Jomerce

Problems with the Search/Find function in Reader 10.1.6

I gave in a keyword in a 430 pages dokument (photoshopelements6_help.pdf) and got many search results for different keywords (in bold) but not for my keyword!!

Then it's more than likely a scanned image of text rather than actual text. Unsearchable.
thedge000 wrote:
I did some additional checking and found the unsearchable document does not contain fonts under File > Properties> Fonts.

ICM-Script Editor

Good Day to All,
can somebody give me a configuration assistance/document on how to edit script - i need to make some small changes on our script such as replacing the current extension to a new activated extension on the CCM admin.
Thank you,
Lester

actually you can
i want to script the following:
start - collect data - if caller press 1 - forward to number xyz
- if caller does nothing - release call
first question is should i use "collect data" or better the "menu" microapplication?
second: i have to choose a file ( wav ) but where should i put the file? normaly every prompt is played from the IVR.
and what should i select in "library type" and "protocol" ?
thank in advance....

ICM available field in script editor

Need to understand , while we monitor the ICM script and click on the display real-time statistics. Under the skill group section I can see various columns like - Logged on, Ready, Idle, wrap up, work not ready. Can somebody please explain me waht is the coulmn which says" IA" - which is ICM available?? and how it is different when compared to Ready column?
Thanks

ICM Available = agent is Available, may be given a call
Ready = Agent logged in, ICM says "I can see the agent"
ICM Available != Ready in the context of the ICM Script Editor
G.

Import configuration and ICM scripts into ICM 7.5X

Hi all.
I just want to find out if it is possible to export configuration & ICM routing/ Admin scripts from ICM 6.0 into ICM 7.5X? I understand that there is an import/export function in the ICM script editor. Can I just export the scripts from ICM script editor 6.0 and import them into ICM script editor 7.5X?
Appreciate any comment and advice.
Thanks & Regards,
Eric

When you use the EDMT to upgrade your Logger database to be compatible with the 7.5 Schema, all your scripts will be converted. So nothing to do here.
If you have a 7.5 system (say in the lab) and want to try to export a script in .ICMS format and try to import into a 7.5 script editor, it may very well work. Never tried it myself. You sure have to have a bunch of config in place before importing any script otherwise "unresolved" references - and you can deal with that.
What is your aim?
Regards,
Geoff

ICM script formula for busy hour

Hi all,
I'm trying to find what is the best/most accurate statistic which is available in ICM script editor to determine the peak & non-peak hours. Based on this info, I want to point to a different precision queue
a) Number of calls in queue a specific PQ?
b) Number of available / busy agents in a specific PQ?
Any other recommendation?
Thanks!
-JT-

Hi G,
The peak & non peak hours differs based on call type rather than being similar overall. Different call treatment is applied during these periods
a) Low peak - more conditions, steps & longer waiting time within PQ
b) High peak - less conditions, steps & shorter waiting time within PQ
The 2 different approach is to either
a) pre-set the low/high peak based on fixed value (9-12pm peak, 1-pm non peak) - more maintenance
b) dynamically determine high/low based on call statistics in the ICM script - less maintenance
Thanks!
-JT-

Nodes in ICM Scripts

Hi,
Can any one explain me the below clarification on ICM Script editor 8.5
1. What the Call type node used for, and what will happen if we does not use that node?
2. On enterprise Skill Group node, we can see Queue type Priority how does not functions?
3. Also how to roll back the script to previous version?

Hi,
I hope this will help you.
++ call comes to 1st Skill where all agents are busy.
++ its went to the next node Backup Skill the call ll go there. No agents are free there too.
++it plays the queue music. Once the agent Become available in 1st Skill group. call will route to the agent.
The call will be in queue on both the queue to SG node.
two way of scripting .
case one:
case two:

ICM Script Editor 'Search' 'Find' function, won't stop. Bug? 8.5.2

Similar Messages

Maybe you are looking for