Icon Change Problem

I wanted to change the icon for my computer, but the info window says I am "read only" with no options below. How do I do this and why, if I am the admin., is it read only?
Thanks

I take it you mean the sidebar icon enabled by the topmost Finder preference item here:
!http://i41.tinypic.com/i6mi52.jpg!
Doing a GetInfo for Computer in the sidebar, I couldn't "paste in" a different icon in the usual way either.
I suspect you can't change the Computer icon without hacking into the system. It may be one of the icon files in /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/, and if, so you might be able to substitute a different icon under the name of the former icon file. But unless you are very experienced at this sort of thing, I would leave it alone!

Similar Messages

  • Q10 - I tap the screen to select, the icon changes color (indicating selection) but nothing happens...

    I notice an issue that predominantly happens when I use my thumbs to tap but does happen with fingers from time to time. 
    When I select an icon (say, for instance the lower-right corner icon to jump into camera settings), the icon changes color slightly when my thumb touches the glass, and then when I remove my thumb, nothing happens. 
    Sometimes this happens more than 5 times in a row.  It's one thing if the screen never recognized my finger/thumb in the first place.  It is a bit more madening when I KNOW that there was recognition (icon changing color) and yet nothing happens.. 
    Anyone else having this problem?  Is there some way to recalibrate the screen? 
    Right after I posted this message I tried that camera setting button - 7 tries before anything happened with my right thumb, one try with right index finger, then again it took 5 tries with index finger.  The frustrating thing is that the icon to load the camera in the first place (lower right corner)... that one almost always works with the first tap... 

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Macbook Pros display blinks to blue, icons change size, resolution changes and cant reset. Anyone else have this and have a definitive idea of the cause? End up running diagnostics and resetting PRAM and SMC to resolve but why? Thanks.

    We have had several (7-10 recently) macbook Pros start this issue. The screen will jump from regular to blue, the background image will go away and it will be replaced with a blue screen, the icons change size and the screen resolution changes. Someimtes the users name field on the login screen will fly in from off screen... run diagnostics (AppleJack, Disk Util) and reset PRAM and SMC and sometimes this helps but wanted to know if there was a definite reason for this or a better resolution to the problem?
    Thanks all
    Macbook Pros are all newer (some only a month old) Unibody models running Snow Leopard and Lion

    AppleJack has been discontinued, so you should uninstall that.
    I'm suspecting something in software across all machine or a security breach as the primary cause of your problems.
    Wipe and install everything fresh, firmware update the router, change passwords, new software form original sources, etc.
    This might assist.
    Step by Step to fix your Mac
    WiFi security issues, at home and WiFi hotspots
    Harden your Mac against malware attacks
    How do I securely delete data from the machine?

  • Desktop Icons Change Positions After Restart

    Hi,
    After I inadvertently synced my computer with another Mac computer my icons change position after restart. I was trying to sync another computer to mine.
    I have tried the usual suggestions of taking out com.apple.finder.plist and com.apple.desktop.plist and letting the system create these new files but the problem still persists. I also checked the Finder > View > Show View Options and arrange by none is still selected.
    Does anyone have a suggestion how I can fix this problem? Will I have to go back in time with Time Machine and restore my entire system to solve this?
    I can't operate with the desktop icons changing positions like this.
    Thanks,
    Pacecom

    Delete the hidden .DS_Store file associated with your Desktop folder. Launch the Terminal.app (in /Applications/Utilities/), copy & paste the following command into the window that pops up, hit the return key, quit the Terminal.app, OPTION-click and hold the Dock's Finder icon, and select Relaunch:
    *rm ~/Desktop/".DS_Store"*
    Now, set the Desktop as desired, log out and back in, and the Desktop should be as it was as you last set it.

  • Networklocation corrupt icon change to white paper

    For our colleagues we made a network locations to SharePoint.
    some colleagues are complaining about corrupt networklocations. The networklocation icon changing to a white paper and is doing nothing.
    i did try to reproduce the problem but i wasn't able. the next morning when i opened my pc an networklocation was corrupt.
    the only fix i know is removing the networklocation and add it again.
    this way i made the network location
    http://support.microsoft.com/kb/2616712
    Sign in to the SharePoint Online site by using your Office 365 credentials. Make sure that you click to select the
    Keep me signed in check box.
    Open a document library in Explorer View. For example, follow these steps:
    From your Team Site, select Shared Documents.
    Under the Library Tools section in the Ribbon, click the
    Library tab.
    In the Actions group, click Open with Explorer.
    i did copy the URL and did use the URL to make a networklocation.
    we are running windows 8.1 and office 2013.
    internet explorer 11
    trusted websites are added
    and remember login is on
    Kind Regards,
    Arie Guijt

    What changes were made to computer. 
    Any windows update installed on the computer? Check from add remove programs
    Check below
    http://community.office365.com/en-us/f/154/t/22511.aspx
    I've been through much the same sort of pain as you describe - I tried using shortcuts on the users' desktop for them to access SharePoint via WebDAV but these fail to connect regularly unless the user has logged on through the browser. I followed all of
    the instructions in KB 2616712 without resolving the problem. I raised a Service Request and the answer I received was:
    =====================
    • Issue Description:
    • Problems accessing mapped SharePoint folders via WebDAV
    • Issue Resolution:  
    • This is a By-design behavior since SharePoint online in office 365 uses forms based authentication & the user is authenticated using SAML token as against BPOS where windows authentication method was used.
    • This SAML token expires every 2 hours & after that the mapped drive for SharePoint library cant access the resources unless the user signs in to the site again from the browser.
    • At this point we don't have a possible solution to this however this issue is in the knowledge of our Operations team & they are working towards a solution. We don't have ETA for the same though.
    • You can develop a custom application that would authenticate the user against sharepoint site without having him to open the browser & sign in. The following article may be of help in doing so.
    www.wictorwilen.se/.../How-to-do-active-authentication-to-Office-365-and-SharePoint-Online.aspx
    If this helped you resolve your issue, please mark it Answered

  • TM Disk icon changed from blue to yellow

    I have an external USB Hitachi 1TB drive with 2 partitions - one for time machine and the other for weekly SuperDuper backups. I use TimeMachineEditor to limit backups to once every 8 hours. The system has worked well for over a year and I can access all my backups without any (apparent) problems.
    Yesterday the TM partition icon changed color from blue to the generic yellow. Should I be concerned? Should I run DiskWarrior or try other maintenance on the partition?

    If the drive has been disconnected or shut off this may happen when TM reconnects. It continues to use the device for backup, however. If no backup is underway when the drive is reconnected then the icon should change once TM starts to do a backup. I've had this happen any number of times on my system. Sometimes the TM drive's icon never changes unless I turn off TM then turn it back on and reselect the backup drive. I wouldn't worry about it.

  • Mail Icon Change....

    I have been having problems with receiving emails.  I deleted the account and created a new with the same info.  When I did this, the mail icon changed to an envelope with a "Y" on it.  Like it is a yahoo account or something.  This is a bellsouth.net (att.net) account, and not Yahoo.  Is this normal, did I do something wrong?

    bellsouth is hosted by yahoo and technically is a yahoo email adress. The bb does give custom icons for yahoo email accouts. i got the yahoo 'Y' icon for my BB.
    Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

  • Icons changing when downloading reader, why?

    When I download any version of reader, all my desktop icons change to PDF icons. Running Windows 7. What's happening?

    I don't know the why, but this should be useful for correcting the problem:
    http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acroba t.html

  • Desktop Icons Change

    After I download Adobe Reader all the icons change to Adobe symbols and I can not open them.

    What is your operating system & version?
    If it is Windows 7 or Vista, see http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acroba t.html

  • Why do document icons change

    During login, document icons display as the familiar icon we've become accustomed to, but when login completes, the icons change to a rather drab, generic-looking thing. For example Word documents, which used to show as the familiar blue Word document icon, are now plain white with 'DOC' at the bottom. How can I get the original icons to display?
    Thanks.

    Hi Mike:
    I might be telling you to chase rainbows.
    I am running OS X 10.6, so there may be a disconnect.
    However, when I open my document folder, the folders are blue, but individual documents are a white icon with something like doc at the bottom. I consider this "normal," but we may be talking about different things...
    Barry
    Barry

  • How to address the IP address automatically changing problem?

    My Oracle database 10g(10.2.0) is on the WinXP platform and the system IP address often changes automatically. This leads to some troubles with my Oracle database. How to deal with this problem? How to stop the IP changing problem?

    frank.qian wrote:
    But my database is using an ipaddress now. When I use loalhost instead, can database accept this?The database doesn't know or care. Its all in your network configuration files ... listener.ora and tnsnames.ora, and your 'hosts' file.
    Edited by: EdStevens on Dec 1, 2008 8:47 PM

  • Batch process icon changes

    Is there a way to change icons changes in a Finder window for several items at a time.
    By choosing Get Info from the File menu I can only change one icon, and then repete the process for the next one.
    Photoscene
    PowerBook G4 17 inch, PowerBook G4 12 inch   Mac OS X (10.4.6)   Tiger/Panther

    There is a plugin that lets you batch process Finder icons, FinderIconCM.
    http://www.pixture.com/software/macosx.php
    Photoscene

  • Icons change from desktop to HD

    Hello everyone.
    I just got started in 10.6 and I notice that icons of documents such as PDFs and TextEdit documents look different on the desktop but change to their familiar look when moved to the hard drive. Is this normal on Snow Leopard or is something not right with my system?
    Thanks for any comments.
    Rich

    Thanks for clearing that up for me. I investigated the situation and decided that leaving the icon preview mode on would be an asset without hurting anything. It was just strange to see the icons change when transferred from the desktop to the Home HD.
    Thanks again.

  • Desktop icons change size when I move the cursor

    Intermittently, when I move the cursor with my trackpad, the desktop icons change size—minimize going from 44 to 16 icon size. This happens with the Finder in the foreground or background.
    I think there's a fix, but I cannot find it.
    All help appreciated,
    Bill

    Press Command-Option-8. Someone apparently turned on Zoom. (See System Preferences > Universal Access and click the Options button next to Zoom for more information.)

  • Desktop icons change during startup

    When I start my MBP, I've noticed some of the icons on the desktop (say a spreadsheet) have a nice looking, easily recognizable image, but as the menu bar loads, some of the icons change, to a something different and usually lose their color, going to back and white.
    Any ideas what's going on?
    Regards,
    Jp

    HI James,
    Not certain what could cause that but try booting from your install disk and run Disk Utility.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    And run the Apple Hardware Test also. http://support.apple.com/kb/HT2684
    Carolyn

Maybe you are looking for

  • Java applet will not install in browser

    My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window w

  • Tax Code Error

    Dear All, We are using 2007 B - PL 7 We have created tax code as BED + VAT. But it is not showing in list of sales codes form while creating A/R Invoice. But it is available in  Tax Code setup. Pl. any body can help in creating setup with Central exc

  • Line item interval for SCs and POs

    Is it possible to change line item numbers to start from 10, 20, ,,,,etc instead of 1,2,3,..   etc. for shopping carts and POs ? Is there a BADI involved or somewhere in config ? Where is the line item interval defined ? In R/3, you can define the li

  • Print All Objects

    <p>On some of my Analyzer 7.2.5 reports, when I try to print with"Print All Objects", the radio button grays out andfreezes, and I need to kill it through Windows Task Manager.</p><p> </p><p>This has consistently happened to the multiple-object (6obj

  • Semaphore problem upon reinitializing VI

    Dear all,  I am not a Labview expert and I'm encountering a problem here. I've searched the web and these forums, nothing came up though.  So here is the thing: I used labview's suggestion to reinitialize all values in my program to their default val