Icon image is not shown properly in LInux

Hi,
I am creating a JDialog as follows:
JDialog jd = new JDialog(frame, true);
in the frame, I have set the icon using
frame.setIconImage(image),
but the image set to this is not shown properly in Linux, but it is shown clearly in windows,
can anybody show some light here.
thanx,
Raj

I would put my money on the fact that since your application is timing out, it is dropping any state that your View Objects otherwise had before the application timeout.
So upon reauthorizing and reaccessing the application (and going directly to the detail page) the View Object is reinstantiated and only knows to go to its default data set which is 111.
If my assumption is correct, I don't think you could really implement this without a lot of trouble.

Similar Messages

  • Xperia ZL - when I turn the screen image is not shown

    I speak Spanish but try to leave the message in English too. SPANISH: Mi celular ZL presenta un problema, cuando enciendo la pantalla esta no muestra imagen. En otras palabras, la pantalla se ve negra. Esto sucede de forma aleatoria. Si tengo el celular en reposo (pero encendido) (por ejemplo en mi bolsillo o sobre mi escritorio) y quiero utilizarlo, presiono el botón de encendido, pero la pantalla no muestra imagen, el brillo de la pantalla enciende, el tactil funciona pero la imagen no se muestra. Cuando esto sucede, si presiono el botón de encendido 2 veces vuelve a presentar la imagen (la primera vez es como bloquear-apagar la pantalla, la segunda es como volverla a encender). Esto sucede de forma aleatoria entre días. También sucede al querer finalizar una llamada telefónica y separarlo de mi rostro la pantalla no muestra ninguna imagen lo que no me permite finalizar la llamada. También sucede de forma aleatoria cada tanto tiempo. Aunque suceda de forma aleatoria, es molesto y deseo encontrar solución al problema. He restablecido a datos de fabrica muchas veces y no se ha solucionado el problema. Soy de Colombia(país de latinoamerica) y la versión del sistema que tengo es Android 4.2.2 compilación 10.3.A.0.423. Via OTA y por PC Companion no aparece alguna nueva actualización. Si alguien tiene información al respecto, le sucede el mismo problema o tiene algún comentario al respecto, yo agradezco responda este mensaje. Si hay una forma de reportar este problema a los desarrolladores de Sony para que lo tengan en cuenta por favor informarme como hacerlo.gracias. ENGLISH: My cell ZL has a problem, when I turn the screen image is not shown. In other words, the screen is black. This happens at random. If I have the cell at rest (but on) (for example in my pocket or on my desk) and I use it, I press the power button, but the screen shows no picture, the screen brightness on, the touch works but the image is not displayed. When this happens, if I press the power button 2 times again presents the image (the first time is like block-off the screen, the second is like it back on). This happens randomly between days. It also happens to want to end a phone call and separate from my face the screen does not display an image which does not allow me to end the call. It also happens randomly every so often. Although happen randomly, it's annoying and I want to find solution to the problem. I reset to factory data many times and has not fixed the problem. I'm from Colombia (Latin American country) and the system version that I have is Android 4.2.2 10.3.A.0.423 compilation. Via OTA and PC Companion does not show any new updates. If anyone has information about it, it happens the same problem or have any comments about it, I appreciate reply to this message. If there is a way to report this problem to the developers of Sony to take this into account please tell me how. Thank you....

    This problem seems to be related to what happens to the model Xperia Z ultra http://forum.xda-developers.com/showthread.php?t=2392252 http://www.xperiablog.net/2013/08/21/some-xperia-z-ultra-owners-complaining-of-defective-screens/ http://www.ubergizmo.com/2013/08/some-sony-xperia-z-ultra-owners-complain-of-wonky-displays/ http://www.xperiablog.net/2013/08/21/some-xperia-z-ultra-owners-complaining-of-defective-screens/ in spanish: El problema parece relacionado a lo que le sucede a los sony xperia z ultra. http://www.movilzona.es/2013/08/21/algunos-sony-xperia-z-ultra-presentan-problemas-con-la-pantalla-de-desbloqueo/

  • Sometimes, some images are not shown...

    Hi!
    Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

    I am having a similar problem so maybe someone can help me too.
    I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
    I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
    I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
            MediaTracker tracker = new MediaTracker(applet);
            for (int i = 0; i < img.length; i++) {
              img[i] = applet.getImage(urlCodeBase, imagePath + images);
    tracker.addImage(img[i], i);
    tracker.waitForID(i);
    if (tracker.isErrorAny()) {
    System.err.println("Error loading image " + images[i]);
    My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
    Any ideas would be a great help!

  • Button Images are not shown

    Dear All,
    In one of our test instance, some button images are not shown, whereas some are.
    They are shown as grey button.
    I searched metalink, according to them patch 1238573 should be installed, which is already installed.
    What could be the reason?
    Also, is there any way to find out which images are missing?
    Regards,
    Ashish Shah

    Hi
    I've seen this happen a few times. The solution is usually to synchronise something called 'the X-Server' with the middle tier. I'm afraid that the technology is over my head, but it does work!
    The X-Server controls how images are rendered in the e-Business Suite. Your DBA should know what this is and it's a simple matter of stopping and restrating the X-server.
    That should do the trick!
    Regards
    Tim

  • Why do QTVR interactive images do not function properly or at all?

    QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
    http://www.edfruinphotography.com/MILLCITY_2.html

    I have Safari 5.1.7. I am using Mac Snow Leopard.
    That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
    You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General.

  • Images are not displaying properly i.e Broken

    images are not displaying properly i.e Broken .they are not opening in any website even in facebook

    Hi Himanshu,
    Tools>Internet Options>Advanced tab, click the "Reset" button.
    Close all open IE windows and then start IE and try again.
    Post consumer questions about IE to http://answers.microsoft.com (Help>Online Support menu from IE.)... at the answers forum you have to select what version of windows and IE you are using with your question...
    which you did not stipulate here.
    You can also choose at answers your preferred language and receive an answer in your preferred language.
    Also include with your questions to answers, the FULL address of any websites you are having problems with... so that the support engineers can visit and test the web page...
    Just saying Facebook is not sufficient as when you say 'pictures' are not displaying...perhaps you mean 'video' pictures... also websites like Facebook have different addresses for different parts of the world.
    eg. http://facebook.com.au/ or http://youtube.com.au/nasa
    This forum is for questions from System Administrators who manage 100's of computers that use IE with IEAK and GPO.
    Regards.
    Rob^_^

  • When Webdynpro popup is opened for the 2nd time, image is not shown

    Hi Experts,
    We have created a WebDynpro with a popup window.
    This is shown in an iView in the portal.
    If the popup is opened for the first time it looks good.
    If the popup is opened for the 2nd time the image is not shown and the title is shown with a different font.
    If we do a preview of the iView in PCD content area, the title and image is shown and the right font is used: also when you open this for the second time.
    If the iView is in a role the problem appears.
    How can this be solved?
    Thanks in advance,
    Joeri

    Sounds like a wrong reference to a stylesheet.
    Use IE Developer Toolbar or Firefox to debug the code. Or view source (of the popup) and search for .css. Do the same for the popup that doesn't work. Check if there are differences.
    Good luck!
    Noel

  • Documents or images are not shown in document viewer properly.

    Hi Friends,
    we are using sap ecc6.0 release 700.we have implemented document viewer functionality to one of our application.we have Adobe in our system.some times documets(pdfs) are shown properly in document viewer.but some times documents are not open in document viewer.in this case if restart the work station PC ,document viewer working properly.so we have to know any ways to correct the bug without restart the workstation PC.
    please suggest any ways to correct it.

    Hi Venkat,
    i am not sure about it, but lets a try ask to your basis consultant for the latest gui .i.e. 7.3 with patch level 8, use the latest GUI and then see , is still you are getting those problems, please revert with your answer.

  • Images in button not shown properly

    I have imported a quicktime file which was exported from FCP. The final cut portion is strictly jpeg files, no movies. I have made chapter markers in FCP. So in DVD Studio Pro, I created a button and chapter index, then selected a template. When I go to the menu(s) with chapters, the chapters are all correct. However, the photos in the button are not resized properly. Most of the heads are cut off. I have the button set with motion but turned it off and still photos not correct. How can I make DVD Studio Pro resize the photos properly? I right click the chapter button (it is not a drop zone), the option for align objects and distribute objects is not available. I am unable to click on it, thinking that is what I need to change. Any suggestions in how to get the photos to show completely in the button and not be cut off? I am very knew at this, only my second project, so please explain in detail.
    Thanks!

    Check your frame rate
    are you declaring frame rate through XML or in external file  ?
    check your code again
    or
    may be you forget to upload some related files

  • Menutab not shown properly when second menu-item is selected.

    When my menutabs are shown everything seems fine, but when you click the 2nd menu-tab the first menu-tab isn't shown properly anymore.
    If I have a look at the code-source I can see that the first gif that's needed for the tabbed-view isn't present anymore if the 2nd menu-tab is clicked.
    Could somebody explain the different skins that are used by the menuTab component so I know if maybe I've forget to define a specific in my custom skin?
    Maybe somebody already used custom skins with your custom images for the tabbed view of menuTabs?
    Regards,
    Nathalie

    >
    Yes, you are right. In this sample program,
    paintcomponent() is not really necessary, but it is in
    the real program I am doing. So I can not get rid of
    the paintComponent() method. In this paintComponent()
    method I have added (add) and painted (paint) several
    JComponent objects and this is the only one which
    fails. I can not find the reason why.
    Regards.
    the reason is that on each call to paint , you add new components to the panel.
    the scenario goes like this:
    1. frame is made visible -> paintComponent() gets called - > fillPanel() gets called ,
    so on the panel are the following 4 components:
    one JButton
    one JTextField
    one JCheckBox
    one ComboBox
    2. click on the combobox, -> the popup list of the combo is displayed -> paintComponent() is called -> fillPanel() is called
    so you have 8 components on the panel;
    The popup list remain visible, is not actualy contained in the PanelNullLayout component due to the swing mecanics
    3. you select an option in the list, the list becomes invisible, paint() gets called -> fillPanel getsCalled(),
    so, again four componets are added. you have 12 components in the panel.
    The components are painted in the order they have been added to therir container. The first combo box, that you first clicked, has selected index 1, but the last two have selected index 0. As these two are added after the first one, they are painted "above" first one, so you see the last comboBox added.
    Add this code to the paintComponet method if you did not understand
    // public void paintComponent(Graphics g) {
    // super.paintComponent(g);
    // fillPanell();
    int count = getComponentCount();
    System.out.println("Total components :" +count);
    for ( int i = 0; i < count; i++ ) {
    Component c = getComponent(i);
    if ( c instanceof javax.swing.JComboBox ) {
    System.out.println("Selected index in combo " i+" :"+( (JComboBox) c ).getSelectedIndex() );

  • ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

    Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
    I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
    When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
    Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
    Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
    the Arial Font.
    How can we correct this problem?
    Regards
    Udo
    These are the files changed by Fontsolution Configuration Script:
    uifont.ali
    # uifont.ali provided in fontsolutions.tar for developer 9.0.2
    # $Header: uifont.ali@@/main/22 \
    # Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
    # Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
    # $
    # $Revision: /main/22 $
    # Copyright (c) Oracle Corporation 1994, 2002.
    # All Rights Reserved.
    # DESCRIPTION:
    # Each line is of the form:
    # <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
    # <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
    # The <Face> must be the name (string/identifier) of a font face. The
    # <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
    # value or a predefined identifier/string. For example, both US7ASCII
    # and 1 are valid <CharSet> values, and refer to the same character set.
    # The <Size> dimension must be an explicit size, in points.
    # The following is a list of recognized names and their numeric
    # equivalents:
    # Styles Numeric value
    # Plain 0
    # Italic 1
    # Oblique 2
    # Underline 4
    # Outline 8
    # Shadow 16
    # Inverted 32
    # Overstrike 64
    # Blink 128
    # Weights Numeric value
    # Ultralight 1
    # Extralight 2
    # Light 3
    # Demilight 4
    # Medium 5
    # Demibold 6
    # Bold 7
    # Extrabold 8
    # Ultrabold 9
    # Widths Numeric value
    # Ultradense 1
    # Extradense 2
    # Dense 3
    # Semidense 4
    # Normal 5
    # Semiexpand 6
    # Expand 7
    # Extraexpand 8
    # Ultraexpand 9
    # Styles may be combined; you can use plus ("+") to delimit parts of a
    # style. For example,
    # Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
    # are equivalent, and either one will map any Arial that has both Italic
    # and Overstrike styles to a 12-point, bold, italic Helvetica font.
    # All strings are case-insensitive in mapping. Font faces are likely to
    # be case-sensitive on lookup, depending on the platform and surface, so
    # care should be taken with names used on the right-hand side; but they
    # will be mapped case-insensitively.
    # See your platform documentation for a list of all supported character
    # sets, and available fonts.
    # BUGS:
    # o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
    #===============================================================
    [ Global ] # Put mappings for all surfaces here.
    # Mapping from MS Windows
    #Arial = helvetica
    #"Courier New" = courier
    #"Times New Roman" = times
    #Modern = helvetica
    #"MS Sans Serif" = helvetica
    #"MS Serif" = times
    #"Small Fonts" = helvetica
    "Sadvocra" = helvetica..Oblique.Medium
    "sAdC128d" = helvetica..Plain.Medium
    "CarolinaBar-B39-25F2" = helvetica...Bold
    #"IDAutomationSMICR" = helvetica
    # Mapping from Macintosh
    #"New Century Schlbk" = "new century schoolbook"
    #"New York" = times
    #geneva = helvetica
    #===============================================================
    [ Printer ] # Put mappings for all printers here.
    #===============================================================
    [ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
    # Sample Kanji font mappings
    ...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    .....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
    .....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
    # Mapping from MS Windows
    #Roman = palatino
    #Script = "itc zapf chancery"
    #FixedSys = courier
    #System = helvetica
    # Mapping from Macintosh
    #"Avant Garde" = "itc avant garde gothic"
    # Mapping from Motif display
    #fixed = courier
    #clean = times
    #lucidatypewriter = courier
    #lucidabright = times
    #Arial = helvetica
    #"Courier New" = courier
    #"Times New Roman" = times
    # MICR font
    #helvetica=IDAutomationSMICR
    #===============================================================
    [ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
    # Sample Kanji font mappings
    ...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    .....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
    .....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
    # Mapping from MS Windows
    #Roman = palatino
    #Script = "itc zapf chancery"
    #FixedSys = courier
    #System = helvetica
    # Mapping from Macintosh
    #"Avant Garde" = "itc avant garde gothic"
    # Mapping from Motif display
    #fixed = courier
    #clean = times
    #lucidatypewriter = courier
    #lucidabright = times
    #===============================================================
    [ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
    helvetica = univers
    times = "cg times"
    clean = "antique olv"
    fixed = courier
    lucida = univers
    lucidabright = "cg times"
    lucidatypewriter = courier
    "new century schoolbook" = univers
    terminal = "line printer"
    #===============================================================
    [ Display ] # Put mappings for all display surfaces here.
    #===============================================================
    [ Display:Motif ] # Put mappings for Motif displays here
    # Fix for bug no 778937 DO NOT MOVE!
    Roman.....sjis = lucida.....jeuc
    Script.....sjis = lucidabright.....jeuc
    FixedSys.....sjis = fixed.....jeuc
    System.....sjis = lucida.....jeuc
    .....sjis = .....jeuc
    # Mapping from MS Windows
    Roman = lucida
    Script = lucidabright
    FixedSys = fixed
    System = lucida
    # Mapping from Macintosh
    "Avant Garde" = helvetica
    "Bookman" = times
    #===============================================================
    [ Display:CM ] # Put mappings for all CM displays here.
    # These are DEC-specific, and may need localization
    *..Blink = Blinking
    *..Inverted+Underline.Bold = ReverseBoldUnderline
    *..Inverted+Underline. = UnderlineReverse
    *..Underline.Bold = UnderlineBold
    *..Inverted.Bold = ReverseBold
    *...Bold = Bold
    *..Underline = Underline
    *..Inverted = Reverse
    * = Plain # The font of last resort
    # Oracle Report PDF sections
    # Three new sections have been added:
    # [ PDF ] - Used for font aliasing and Multibyte language support
    # [ PDF:Embed ] - Used for Type 1 font embedding
    # [ PDF:Subset ] - Used for True Type Font subsetting
    [ PDF ]
    # This example shows how to rename helvetica font to Courier font
    # helvetica = Courier
    # You can Alias specific styles of font as below
    # helvetica.12..Bold.. = Courier.14....
    # "Lucida Bright".12..Bold = "New Century Schoolbook"
    # Support for Far Eastern Languages:
    # PDF section can be additionally used to enable Multibyte language support
    # built into Reports. To use this feature with Adobe (r) Acrobat (c), you
    # need to install the Asian font pack available online at the Adobe web site.
    # .....SJIS = "HeiseiKakuGo-W5-Acro"
    # A Japanese report run with Shift-JIS character set is replaced to
    # HeiseiKakuGo-W5-Acro CID font.
    arial = Arial
    "arial" =Arial
    "arial narrow" = "Arial Narrow"
    "courier new" = "Courier New"
    tahoma = Tahoma
    "microsoft sans serif" = "Microsoft Sans Serif"
    "ms sans serif" = "MS Sans Serif"
    "times new roman" = "Times New Roman"
    [ PDF:Embed ]
    # This example shows how to embed Type 1 helvetica font into the PDF file:
    # helvetica = "helvetica.afm helvetica.pfa"
    # You need to specify the .afm file before the .pfa file.
    # The font files must exist in one of the folders specified in REPORTS_PATH.
    [ PDF:Subset ]
    # This example shows how to subset Arial True Type font into the PDF file:
    # helvetica = "Arial.ttf"
    # The True Type font files must exist in any one of the folders specified in
    # REPORTS_PATH.
    helvetica..Oblique.Medium = "Sadvocra.ttf"
    helvetica..Plain.Medium = "Sadc128d.ttf"
    helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
    # NOTES ON PRECEDENCE OF PDF SECTIONS:
    # If you have entries for a same font in many PDF sections, then Font
    # Aliasing entry will take precedence over Font Embedding entry. Entries
    # in Font Embedding will take precedence over the entries in Font Subsetting
    # section.
    # Generic entries for a font must follow more specific entries for the same
    # font. For instance, if you want to subset helvetica Plain, helvetica Bold,
    # helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
    # [ PDF:Subset ]
    # helvetica..Italic.Bold.. = "Arialbi.ttf"
    # helvetica...Bold.. = "Arialb.ttf"
    # helvetica..Italic... = "Ariali.ttf"
    # helvetica..... = "Arial.ttf"
    # If helvetica..... entry appears in the top of the list, all the styles of
    # helvetica font in the layout will be subset as helvetica Plain font.
    uiprint.txt
    # This is the printer configuration file.
    # The format for entries in this file is:
    # <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
    # The first field is the name of the printer. It is the name you give
    # to lpq.
    # The second field is the type of driver to be used for the printer.
    # Currently, "PostScript" and "ASCII" are the only types of driver for
    # printers supported for now. But in future we may be supporting
    # drivers for other printer types.
    # The third field is the version of the type of printer driver. It's 1
    # or 2 for all PostScript printers; or 1 for ASCII printers.
    # The fourth field is a long description of the printer. This will be
    # presented to the user in the "Choose Printer" dialog window.
    # The fifth field is the printer description file to be used. For
    # PostScript printers it is the PPD file of the printer. (This field is
    # currently unused for ASCII printers.)
    # You can use default.ppd for the description file if you don't have a
    # PPD file for the printer, but it's best to use the correct PPD file
    # for the printer.
    # You must fill in at least the first two fields (printer name and
    # type). If the version is empty, it defaults to "1"; if the long name
    # or description are empty, they will default to empty strings. A
    # version of 1 or an empty long name is fine, but, for PostScript
    # printers, you must fill in the description file name.
    # You don't have to update this file to use any printer. The printer
    # chooser interface let's you select a printer and driver at run time,
    # as well as associate a printer description file to the printer. You
    # should list all printers accessible to users here, however, to
    # simplify selecting a printer.
    # The first entry in this file will be used as the default printer, if
    # no printer was selected in the operating system. (For Unix, the
    # following environment variables will be used in turn to get the
    # default printer's name:
    # TK2_PRINTER
    # ORACLE_PRINTER
    # PRINTER
    # For other platforms, see the Installation and User's Guide for your OS
    # for information on setting the default printer.)
    # WARNING: Do not define multiple entries for the same printer by the
    # same name. Selecting a printer with multiple entries will always result
    # in the first entry being selected. Instead, see if your OS allows you
    # to create an alias for the printer, and use an alias for the second type.
    # The following are examples; replace them with printers accessible from
    # this machine.
    # hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
    # hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
    # hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
    # hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
    # hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
    # --- Note that the following two printers are aliases for the same
    # --- physical printer, with different names for different types:
    # tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
    # tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
    # Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
    fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
    datap462.ppd
    *PPD-Adobe: "4.0"
    *% Adobe Systems PostScript(R) Printer Description File
    *% Copyright 1987-1992 Adobe Systems Incorporated.
    *% All Rights Reserved.
    *% Permission is granted for redistribution of this file as
    *% long as this copyright notice is intact and the contents
    *% of the file is not altered in any way from its original form.
    *% End of Copyright statement
    *FormatVersion: "4.0"
    *FileVersion: "3.1"
    *PCFileName: "DATAP462.PPD"
    *LanguageVersion: English
    *Product: "(Dataproducts LZR 2665)"
    *PSVersion: "(46.2) 1"
    *ModelName: "Dataproducts LZR-2665"
    *NickName: "Dataproducts LZR-2665 v46.2"
    *% ==== Options and Constraints =====
    *OpenGroup: InstallableOptions/Options Installed
    OpenUI Option1/Optional Lower Tray: Boolean
    *DefaultOption1: False
    *Option1 True/Installed: ""
    *Option1 False/Not Installed: ""
    CloseUI: Option1
    *CloseGroup: InstallableOptions
    UIConstraints: Option1 False *InputSlot Lower
    *% General Information and Defaults ===============
    *ColorDevice: False
    *DefaultColorSpace: Gray
    *FreeVM: "178744"
    *LanguageLevel: "1"
    *VariablePaperSize: False
    *FileSystem: False
    *Throughput: "26"
    *Password: "0"
    *ExitServer: "
    count 0 eq {  % is the password on the stack?
    true
    dup % potential password
    statusdict /checkpassword get exec not
    } ifelse
    {  %  if no password or not valid
    (WARNING : Cannot perform the exitserver command.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
    } if
    serverdict /exitserver get exec
    *End
    *Reset: "
    count 0 eq {  % is the password on the stack?
    true
    dup % potential password
    statusdict /checkpassword get exec not
    } ifelse
    {  %  if no password or not valid
    (WARNING : Cannot reset printer.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
    } if
    serverdict /exitserver get exec
    systemdict /quit get exec
    (WARNING : Printer Reset Failed.) = flush
    *End
    *DefaultResolution: 300dpi
    *?Resolution: "
    save
    initgraphics
    0 0 moveto currentpoint matrix defaultmatrix transform
    0 72 lineto currentpoint matrix defaultmatrix transform
    3 -1 roll sub dup mul
    3 1 roll exch sub dup mul
    add sqrt round cvi
    ( ) cvs print (dpi) = flush
    restore
    *End
    *% Halftone Information ===============
    *ScreenFreq: "50.0"
    *ScreenAngle: "54.0"
    *DefaultScreenProc: Dot
    *ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
    *ScreenProc Line: "{ pop }"
    *ScreenProc Ellipse: "
    { dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
    *End
    *DefaultTransfer: Null
    *Transfer Null: "{ }"
    *Transfer Null.Inverse: "{ 1 exch sub }"
    *% Paper Handling ===================
    *% Use these entries to set paper size most of the time, unless there is
    *% specific reason to use PageRegion.
    *OpenUI *PageSize: PickOne
    *OrderDependency: 30 AnySetup *PageSize
    *DefaultPageSize: Letter
    *PageSize Letter: "statusdict /lettertray get exec letterR"
    *PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
    *PageSize Legal: "statusdict /legaltray get exec"
    *PageSize Ledger: "statusdict /ledgertray get exec"
    *PageSize Statement: "statusdict /statementtray get exec"
    *PageSize Tabloid: "statusdict /11x17tray get exec"
    *PageSize A3: "statusdict /a3tray get exec"
    *PageSize A4: "statusdict /a4tray get exec a4R"
    *PageSize A4.Transverse: "statusdict /a4tray get exec a4"
    *PageSize A5: "statusdict /a5tray get exec"
    *PageSize B4: "statusdict /b4tray get exec"
    *PageSize B5: "statusdict /b5tray get exec b5R"
    *PageSize B5.Transverse: "statusdict /b5tray get exec b5"
    *CloseUI: *PageSize
    *% These entries will set up the frame buffer. Usually used with manual feed.
    *OpenUI *PageRegion: PickOne
    *OrderDependency: 40 AnySetup *PageRegion
    *DefaultPageRegion: Letter
    *PageRegion Letter: "letterR"
    *PageRegion Letter.Transverse: "letter"
    *PageRegion Legal: "legal"
    *PageRegion Ledger: "ledger"
    *PageRegion Tabloid: "11x17"
    *PageRegion A3: "a3"
    *PageRegion A4: "a4R"
    *PageRegion A4.Transverse: "a4"
    *PageRegion A5: "a5"
    *PageRegion B4: "b4"
    *PageRegion B5: "b5R"
    *PageRegion B5.Transverse: "b5"
    *PageRegion Statement: "statement"
    *CloseUI: *PageRegion
    *% The following entries provide information about specific paper keywords.
    *DefaultImageableArea: Letter
    *ImageableArea Letter: "20 16 591 775 "
    *ImageableArea Letter.Transverse: "18 19 593 773 "
    *ImageableArea Legal: "18 19 593 990 "
    *ImageableArea Ledger: "18 16 1205 775 "
    *ImageableArea Tabloid: "16 19 775 1206 "
    *ImageableArea A3: "18 21 823 1170 "
    *ImageableArea A4: "18 18 576 823 "
    *ImageableArea A4.Transverse: "18 19 577 823 "
    *ImageableArea A5: "18 19 401 577 "
    *ImageableArea B4: "19 15 709 1017 "
    *ImageableArea B5: "20 19 495 709 "
    *ImageableArea B5.Transverse: "20 19 495 709 "
    *ImageableArea Statement: "22 19 374 594 "
    *?ImageableArea: "
    save
    /cvp {(                ) cvs print ( ) print } bind def
    /upperright {10000 mul floor 10000 div} bind def
    /lowerleft {10000 mul ceiling 10000 div} bind def
    newpath clippath pathbbox
    4 -2 roll exch 2 {lowerleft cvp} repeat
    exch 2 {upperright cvp} repeat flush
    restore
    *End
    *% These provide the physical dimensions of the paper (by keyword)
    *DefaultPaperDimension: Letter
    *PaperDimension Letter: "612 792"
    *PaperDimension Letter.Transverse: "612 792"
    *PaperDimension Legal: "612 1008"
    *PaperDimension Ledger: "1224 792"
    *PaperDimension Tabloid: "792 1224"
    *PaperDimension A3: "842 1191"
    *PaperDimension A4: "595 842"
    *PaperDimension A4.Transverse: "595 842"
    *PaperDimension A5: "420 595"
    *PaperDimension B4: "729 1032"
    *PaperDimension B5: "516 729"
    *PaperDimension B5.Transverse: "516 729"
    *PaperDimension Statement: "396 612"
    *RequiresPageRegion All: True
    *OpenUI *InputSlot: PickOne
    *OrderDependency: 20 AnySetup *InputSlot
    *DefaultInputSlot: Upper
    *InputSlot Upper: "0 statusdict /setpapertray get exec"
    *InputSlot Lower: "1 statusdict /setpapertray get exec"
    *?InputSlot: "
    save
    [ (Upper) (Lower) ] statusdict /papertray get exec
    (get exec) stopped ( pop pop (Unknown)} if = flush
    restore
    *End
    *CloseUI: *InputSlot
    *OpenUI *ManualFeed: Boolean
    *OrderDependency: 20 AnySetup *ManualFeed
    *DefaultManualFeed: False
    *ManualFeed True: "statusdict /manualfeed true put"
    *ManualFeed False: "statusdict /manualfeed false put"
    *?ManualFeed: "
    save
    statusdict /manualfeed get {(True)}{(False)}ifelse = flush
    restore
    *End
    *CloseUI: *ManualFeed
    *DefaultOutputOrder: Reverse
    *% Font Information =====================
    *% This datap462.ppd is provided by fontsolutions.tar
    *DefaultFont: Courier
    *Font ArialMT: Standard "(001.004)" Standard ROM
    *Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
    *Font Arial-BoldMT: Standard "(001.004)" Standard ROM
    *Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
    *Font ArialNarrow: Standard "(001.004)" Standard ROM
    *Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
    *Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
    *Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
    *Font CourierNewMT: Standard "(001.004)" Standard ROM
    *Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
    *Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
    *Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
    *Font Courier: Standard "(001.004)" Standard ROM
    *Font Courier-Bold: Standard "(001.001)" Standard ROM
    *Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
    *Font Courier-Oblique: Standard "(001.001)" Standard ROM
    *Font Helvetica: Standard "(001.001)" Standard ROM
    *Font Helvetica-Bold: Standard "(001.001)" Standard ROM
    *Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
    *Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
    *Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
    *Font Symbol: Special "(001.001)" Special ROM
    *Font Tahoma: Standard "(001.001)" Standard ROM
    *Font Tahoma-Bold: Standard "(001.001)" Standard ROM
    *Font Times-Bold: Standard "(001.001)" Standard ROM
    *Font Times-BoldItalic: Standard "(001.001)" Standard ROM
    *Font Times-Italic: Standard "(001.001)" Standard ROM
    *Font Times-Roman: Standard "(001.001)" Standard ROM
    *Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
    *Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
    *Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
    *Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
    *?FontQuery: "
    save
    /str 100 string dup 0 (fonts/) putinterval def
    count 1 gt
    exch dup str 6 94 getinterval cvs
    (/) print print (:) print
    FontDirectory exch known
    {(Yes)}{(No)} ifelse =
    {exit} ifelse
    }bind loop
    (*) = flush
    restore
    *End
    *?FontList: "
    FontDirectory { pop == } bind forall flush
    (*) = flush
    *End
    *% Printer Messages (verbatim from printer):
    *Message: "%%[ exitserver: permanent state may be changed ]%%"
    *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
    *Message: "\FontName\ not found, using Courier"
    *% Status (format: %%[ status: <one of these> ]%% )
    *Status: "idle"
    *Status: "busy"
    *Status: "waiting"
    *Status: "printing"
    *Status: "warming up"
    *Status: "PrinterError: BD check"
    *Status: "PrinterError: Paper jam"
    *Status: "PrinterError: Replace toner bag"
    *Status: "PrinterError: Warming up"
    *Status: "PrinterError: Timing error"
    *Status: "PrinterError: Fuser check"
    *Status: "PrinterError: Cover opened"
    *Status: "PrinterError: Toner empty"
    *Status: "PrinterError: Empty & reset output bin(s)"
    *Status: "PrinterError: Sorter or jogger error"
    *Status: "PrinterError: Scanner check"
    *% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
    *Source: "serial9"
    *Source: "serial25"
    *Source: "AppleTalk"
    *Source: "Centronics"
    *% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
    *PrinterError: "BD check"
    *PrinterError: "Paper jam"
    *PrinterError: "Replace toner bag"
    *PrinterError: "Warming up"
    *PrinterError: "Timing error"
    *PrinterError: "Fuser check"
    *PrinterError: "Cover opened"
    *PrinterError: "Toner empty"
    *PrinterError: "Empty & reset output bin(s)"
    *PrinterError: "Sorter or jogger error"
    *PrinterError: "Scanner check"
    *%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
    *% Color Separation Information =====================
    *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
    *InkName: ProcessBlack/Process Black
    *InkName: CustomColor/Custom Color
    *InkName: ProcessCyan/Process Cyan
    *InkName: ProcessMagenta/Process Magenta
    *InkName: ProcessYellow/Process Yellow
    *% For 60 lpi / 300 dpi =====================================================
    *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
    *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
    *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
    *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
    *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
    *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *% For 53 lpi / 300 dpi =====================================================
    *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
    *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
    *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
    *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
    *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
    *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
    *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
    *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
    *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
    *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
    *% For "Dataproducts LZR 2665" version 46.2
    *% Produced by "GETapd.ps" version 2.0 edit 47
    *% Converted to meet 4.0 specification
    *% Last Edit Date: Sep 15 1992
    *% The byte count of this file should be exactly 011228 or 011572
    *% depending on the filesystem it resides in.
    *% end of PPD file for Dataproducts LZR 2665

    If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
    Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
    Pete

  • Why Images are not shown?

    Post Author: azharrahi
    CA Forum: .NET
    Hi How are all here ?I am using Crystal Reports in Visual Studio.net 2005. Now the problem is that Images are not loading in the web broweser. At runtime in visual studio.net 2005, the Images of Crystal Report Viewer are shown but the Image we insert in the picture box of Crystal Report, it does not show. But in the web browser after uploading web site using URL, it does not show images of Both i.e. CrystalReportViewer and Picture Box. What the problem is that? This has made me annoyed a lot. Anybody can help me please.

    Post Author: robarahz
    CA Forum: .NET
    I had this problem (if I understand you correctly) and the problem was that the new Crystal Report Viewer toolbar was expecting the images to be in teh same folder as the website, but they are actually located one level up in C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727\CrystalReportWebFormViewer3 (or CrystalReportWebFormViewer4 if you're on VS2008).
    To fix this, I copied  the aspnet_client folder into the folder of my website, and everything is fine.
    Hope that helps.
    -robert

  • Cover image is not shown in explorer

    Hi guys, I've already got a new lap which runs W7 ultimate (x64) and Adobe Reader X 10.1.3 but the cover image (the first page) of PDF fiels is not shown in Window's Explorer. Any hints?.
    Thanks in advance,

    try to flush the image.
       image.flush():
       g.drawImage(image, 0, 0, null);
    or try
       Toolkit.getDefaultToolkit().prepareImage(image, -1, -1, null);
        g.drawImage(image, 0, 0, null);
    If the image isn't displayed, just try a new paint after a while (for example after 1 second).
    Another way is to implement the ImageObserver interface who can announce you with the imageUpdate() method when the entire image is loaded:
       public boolean imageUpdate(Image img,int info,int x,int y,int width,int height)
         if(info & ALLBITS)
           //the image is entirely loaded....
       }

  • Parameters are not shown properly

    Hello, 
    I'm having an issue with the report's parameters when they are displayed in Internet Explorer.
    The report was done with reporting services, but it's published in Sharepoint. When I open the report using the Sharepoint URL, the report's parameters are shown vertically, instead of horizontally. And the last parameter is being cut off, hidden under Internet
    Explorer's status bar.
    If I open the same report in Firefox, the parameter is displayed properly since scroll bars appear in all the parameters area, allowing me to scroll down and see the parameter's content.
    Is there any way to fix the parameter's length so that it's displayed properly in Internet Explorer. I noticed that there is a resize box at the end of the parameter, but I can't find a way to have control over it.
    Any help will be appreciated.
    Thanks!

    Hi monicanquiroga,
    By default, the parameters are shown vertically in the Parameters pane which is located on the right of the report page in SharePoint Library. If there are many parameters in the report, there would be a scroll bar to enable you scroll down the last parameter.
    In your scenario, it seems that the Parameter pane is not shown property in the IE browser. To fix this issue, here are two suggestions for your reference:
    Please try to run IE in compatibility mode and run it as Administrator to check the issue again.
    Considering the aspects of the setting or third party add-ons of Internet Explorer (IE). For more details, please see:
    1. Click Tools -> Internet options.
    2. Switch to the Security tab, click Local intranet, and then select Default level.
    3. Switch to the Advanced tab, and click Restore advanced settings.
    4. Temporarily disable third party add-ons. For detailed steps, please see the link: 
    http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Images,css not appearing properly after accessing the reverse proxy page.

    Usecase :
    1) OHS1 with mod_osso agent deployed.
    2) OHS1 configured as reverse proxy.It points to the webserver(OHS2) of the app1.
    OHS1(mod_osso agent installed)-->OHS2(app1 webserver)
    3) httpd.conf entry in OHS1:
    ProxyRequests Off
    <Proxy *>
    Order deny,allow
    Allow from all
    </Proxy>
    ProxyPass /test/ http://tkcltkcl.padma.xxx.com:8088/test/
    ProxyPassReverse /test/ http://tkcltkcl.padma.xxx.com:8088/test/
    4) The direct url for appl1 works as per expectation. The reverse proxy redirects from the OHS1 correctly to the app1 OHS webserver accessing the app1 url.But the contents in the redirected app1 url are not aligned properly.Images,css,placement of html links are not appearing properly on the page.
    Do we need to do any other configuration in the revere proxy setup so as to avoid the misalignment on the redirected page?
    Thanks.

    Hi:
    Thanks for the reply! I have been UTTERLY scrupulous about
    keeping precisely time-matched and points-in-my-process-matched
    copies of the project folder for logical, "scientific" testing in
    RH5 and RH7, on precisely matched content.
    I have never even tried to open an RH7-processed copy of the
    project in RH5 because I was warned strongly against this action.
    It boils down to this; I cleaned up, FANATICALLY, all those
    illegitmate filenames, ran the project again in 5, still got
    impermissible missing images (and I mean MORALLY impermissible,
    because I'm doing the right thing!)
    Then, I took that project folder, copied it, and opened the
    exact same ingredients, via the .xpj file, in RH7. Same missing
    images.
    WAIT! Left out something important in first post! Dang; this
    was important! I've fixed missing images, had them appear properly
    upon compilation, then had others that HAD been right, come out
    missing. Have also had reimported, re-placed images come out upon
    compilation following repair, and then go missing again on third or
    later, subsequent compilations. Maddening.
    Am EXTREMELY reluctant to delete CPD file, because the last
    time I did that, I lost EXTENSIVE work I'd done on TOC and Index.
    Not cool at all.
    Hope this wasn't too cranky; truly grateful for help. Just
    very frustrated.
    Thanks!

Maybe you are looking for