Icon in header coloumn only displayed when not bound to context

Hi
I face a pretty strange behaviour in my application. I have  atable with some columns.
I want the header with an icon behind the text. usually that is no big deal. Alas the icon wll not be displayed when I bind the columns textview to the context. when I hard-code some entry to the "text" property the icon is shown.
I tried it on several columns,  copied the columns and just switched the text property, its always the same behaviour...
2004 SP19
Stefan

Ok,
It finally works, it's always good to get a break when you're stuck..
I deleted the tablesorter class and used to "offixial" one from the tutorial. then the icons were displayed after th efirst time it was sorted.
As you can read in thread Re: Webdynpro Table: Column Header sort icon not visible
that happened to others to.
I just added one method to the tablesorter class...
public void sort(IWDNode dataSource, String columnId)
and called that upon table data context binding, so that initialy the table is sorted and also the icon appears on the initially sorted
regards
stefan

Similar Messages

  • My iTunes Account only displays 1, not 3 security questions. WHY?

    This has been a problem from he#l!!!
    My iTunes account only displays *1*, not 3 security questions.
    I cannot d/l any digital downloads from the external blu-ray combo disks w/downloads, as iTunes is DEMANDING 3 security questions.
    I've been informed that I need to create a "rescue e-mail" --- I've reset my password account over 20 times (at appleid.apple.com) and the system doesn't show a selection for rescue e-mail (I can add multiple alternative e-mail addresses).
    Has anyone else found a solution to this? Does Apple need to effect a master reset to my account????

    It was already unchecked and im not quite sure what you mean by "click-to-drag"
    Also, I can back up my iphone and it will sync genius data. Just not the recent music I downloaded.

  • Cumulative Percent only displaying when there is a number present

    Hi
    I am using the below cumulative percent formula for a chart and pivot table display (see below code). The problem is that the cumulative percent and cumulative number are only showing up in the pivot table when there is a number to cumulate (see below screenshot).
    While this makes sense logically, I would like to see the value in the prior row appear when there is no value to cumulate so that there is always a value displaying for the user--see second screenshot.
    Does anyone know if there is a way to do this?
    Paul
    Code:
    =(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
    Current result:
    Desired Result:

    Hi Greg
    I tried your solution above and it works from the perspective that it can provide the cumulative number and cumulative percent for a column where the values in the column are all present.
    However, the column I am using represents exit months from foster care actually. There are different month values in the column: .5,1,2,3,4,5,6,9,12,15,18,21,24..... With the exception of .5 to 6 months, they are in 3 month intervals. For this particular
    table, I would like to show only those month values that represent 6 month intervals: 6, 12, 18, 24.....
    When I do this, the cumulative number only sums the values for the columns that are present in the table and not all the actual values. This gives a different number and is not correct.
    Is there a way to get the above function to aggregate all values of a column even when not all values are displayed in the pivot table?
    The function I am using is:
    =countrows(s1Perm1)
    Correctly aggregating values for exit months when they are all present:
    When I only display 6 month intervals, only those values present for the column are cumulatively summing. This is not correct:

  • How do I rid my contacts list of unwanted addresses that only display when creating a message. These contacts are not in my normal contacts list.

    When using my contacts list to address a message, I have unwanted addresses NOT created or entered/saved by me in my contacts list. These addresses do not appear in my contacts database/list.

    Restore the backup

  • Login screen only displays users, not name/pwd fields

    I'd like my Mac to display just a name and password field when booting, but it will only show a list of users instead, even with that option unchecked in Login Options. I have Filevault enabled; does this have anything to do with it? Please advise.

    It may be possible, but not recommended, as Apple does not support that and you may have issues to log in them. Remove them if you do not need them, but if not, I am afraid you will have to choose the user you want to log in with. This is even more difficult to change with FileVault, because your Mac asks you for the user and password before starting loading OS X (remember that your Mac's drive is encrypted).

  • IPod Touch shows play icon in top right corner even when not playing

    Hi,
    Has anyone had the bug where their Touch displays the 'play' icon even though it is not currently playing any music? Mine does this intermittently, and apparently for no reason.
    Thanks,
    Alex

    Was going to start a new topic on this, er, topic but found this thread in a discussion search. I find it kind of annoying - I am constantly checking to make sure nothing's playing to avoid running the battery down. Not a big thing, but ideally they'll fix it in a future update.

  • Brand new Mac mini ONLY displays when waking from sleep

    Have an unusual problem.
    Brand new 2011 Mac mini.  Turn it on, and I do not get the grey Apple logo screen or normal spinning cog.  Light comes on as normal, and chime chimes as normal.  I've tried three different monitors now and I never get a display, unless I put the mini to sleep with the power button in back, then wake it with a keyboard key stroke, the display turns on and works as normal.
    As of 20 Sep 2011, I've got all the software and EFI updates installed.  I've also reset the PMU, SMC, PRAM, and NVRAM to no avail.
    Thanks.
    DJ Horton
    Message was edited by: DJ Horton

    Yes, sure did.  Tried different cables and Thunderbolt to video adapters.  Don't know if it makes a difference, but I'm using VGA.  Originally tried it about a week ago with DVI and it worked ok.  The problem is the monitor we're using in our classroom doesn't support DVI or HDMI.

  • Running total in group header doesn't display when it's at page bottom

    Post Author: Charles Denight
    CA Forum: Formula
    Hi, Using v.9 of Crystal Reports I've created some running totals using a cross-tab workaround to get the running totals into the group headers, but when the group header falls at the bottom of the page then the running total doesn't show up.Would appreciate knowing why and how to fix this.

    Replacing an item that is malfunctioning because of a manufacturing error is the bare minimum I would expect from customer service for any electronics item.
    The thing Apple does extremely well is their flat fee policy for repairs on their computers.
    I managed to break my MacBook pretty seriously (logic board needed to be replaced) and I'm sure it cost them more to repair the unit than the $328 they charged me.
    I probably would have been angry if it was something minor, but I'm guessing that most repairs to screens/motherboards/etc cost more than their flat fees.

  • Clip only displays when moving in program monitor

    Coming from CS6, I am trying to get up to speed with CC Premiere 2014.  I've noticed that when the select zoom level is set to anything less than 100%, the clip in the program monitors goes black when it is not playing.  In other words, if the level is set to Fit or 75%, i can not see it once it stops playing.  Has anyone seen this behavior and more importantly,  can you tell me how to correct it?
    Thank you!!

    John, Thank you for the links on wrappers and codecs....very informative.
    Sorry it took so long to get back with you....life happens...anyway, i have attached a screen shot of what i'm seeing in premiere pro cc 2014.  The files are .mp4 files that I downloaded from the Infinite Skills site as I am taking the self paced Adobe Premiere Pro CC Master class online.  The behavior is consistent regardless of he workspace i use....editing, color correction or audio, etc.
    I also tried the same files within Abobe PP CS6 and the behavior described above does not occur.  The screen shot shows what happens in CS6.
    I could be mistaken but this leads me to believe it is a setting issue within premiere and not necessarily a codec or wrapper issue......but at this point, i am certainly open to suggestions.
    Thank you.

  • TV-Out only displays text / not graphics

    I have a K7N2G-L motherboard with tv-out.
    When I try to setup my system to output video through the tv-out encoder I'm unable to select the TV out option under the properties dialog on the desktop for the tv-out encoder.
    The manual says I can do this!!!
    Why isn't the TV out available for selection???
    I'm using WindowsME.
    I know the tv-out is working because I can see the BIOS boot screen but as soon as windows switches to graphics mode the tv-out seems to turn off.
    Any ideas???
    Thank you in advance.
    Simon (alias SMack)

    hi and welcome to this forum.
    right click on the desktop and go to properties and then advanced.
    then go to the gfx card.
    and then choose clone screen.
    that should do it BUT it could be the device you connected it to that dont work.
    the computer needs a signal back to know it is attached.
    try a vcr or another tv.
    i have mine connected to a vcr and it works good.
    bye

  • Links that automatically open in new window trigger firefox header bug (only happens when working in maximized state - see screenshot in details)

    http://img688.imageshack.us/img688/3849/tabtilebug.png

    nvm :)
    https://bugzilla.mozilla.org/show_bug.cgi?id=625367
    it's gonna be fixed in 4.0.1

  • Mail Dock icon only shows when Inbox has new mail, not other folders.

    Hi
    I've got Rules set up for Mail to move new mail to various folders on receipt, depending on the nature of the emails.
    However the Mail icon in the Dock only indicates when new messages are in the Inbox, not other new emails which might be in other folders waiting to be read.
    Is there some way to fix this so that it notifies me of all new emails?
    Any help would be greatly appreciated.
    Thanks
    Richard

    Are you running leopard?
    Under preferences on my mail (version 3.1.1 i think) then the 'general' tab there is an option "dock unread count" which you can set to inbox/none or all mailboxes.
    I don't remember this being an option under Tiger but it may be worth looking for if you're not on Leopard.
    Hope this helps

  • Nano Just displays "Do not disconnect@

    When nano is connected to pc only displays "do not disconect" and does not show up in iTunes (but windows can see it. Have re-started, re-loaded etc. Any help, please?

    If your iPod is recognised by the computer and iTunes, then the answer could be as simple as you have your iPod enabled for disk use. If this option is switched on then the Do Not Disconnect will stay there until you manually eject your iPod.
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if your iPod set to automatically sync (automatically update songs and playlists) with iTunes and also has a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod

  • Check if htmldb_item is displayed or not

    Morning guys,
    I created a manual tabulat form but some of the Items are only displayed when there is a request to display them. The problem is, when they are not displayed, the code to update the corresponding database table is not executed, I get an error message.
    Now my question:
    Does anybody know if it is possible to include a piece of code in the following code to check wether apex_application.g_f11(z) is found or not. If it is not found the code in the loop should not be executed:
      for z in apex_application.g_f11.first..apex_application.g_f11.last loop
        if apex_application.g_f11(z) is not null then
        insert into zf_asn_supplier (suppl_name, suppl_number, contact, email, ordering_address,
        area, sap_plant) VALUES               (apex_application.g_f11(z),
                                               apex_application.g_f12(z),
                                               apex_application.g_f13(z),
                                               apex_application.g_f14(z),
                                               apex_application.g_f15(z),
                                               apex_application.g_f16(z),
                                               apex_application.g_f17(z));
        END IF;
      END LOOP;Thanks for your time and help!!!
    Regards Patrick

    Thanks for your help varad, but there is still the error message
    ORA-06502: PL/SQL: numeric or value error
    Perhaps a bit more information about the problem:
    I have a SQL report as a manual tabular form and if there are made any changes, the database gets updated (see code below). Now I created another manual tabular form for inserting new data, which containes only one row and is empty (from dual) and which is only displayed when I send a request (Add_Row) through a button.
    I know that I can also do that with a UNION ALL statement in my SQL query, but then the empty row is displayed at the end and the bottom of the report, and I want the empty row to be displayed at the top of the table.
    If the empty row is displayed, the PLSQL Code works without problems, but when it's not displayed, I get the described error message.
    begin
      for i in apex_application.g_f02.first..apex_application.g_f02.last loop
        merge into zf_asn_supplier dest
        using (
    select
    apex_application.g_f02(i) suppl_name,
    apex_application.g_f03(i) suppl_number,
    apex_application.g_f04(i) contact,
    apex_application.g_f06(i) ordering_address,
    apex_application.g_f07(i) area,
    apex_application.g_f08(i) sap_plant,
    apex_application.g_f09(i) supplier_id
    from dual) src
    on ( src.supplier_id = dest.supplier_id)
        when matched then update set
                  dest.suppl_name = src.suppl_name,
                  dest.suppl_number = src.suppl_number,
                  dest.contact = src.contact, 
                  dest.ordering_address = src.ordering_address,
                  dest.area = src.area,
                  dest.sap_plant = src.sap_plant
                  where src.suppl_name IS NOT NULL and src.suppl_number IS NOT NULL
        when not matched then insert (suppl_name, suppl_number, contact, ordering_address, area, sap_plant)
                  values (src.suppl_name, src.suppl_number, src.contact, src.ordering_address, src.area, src.sap_plant)
                  where src.suppl_name is not null and src.suppl_number is not NULL;
      end loop;
      for z in apex_application.g_f11.first..apex_application.g_f11.last loop
        if apex_application.g_f11.exists(z) and apex_application.g_f11(z) IS NOT NULL then
        insert into zf_asn_supplier (suppl_name, suppl_number, contact, email, ordering_address,
        area, sap_plant) VALUES             
                                              (apex_application.g_f11(z),
                                               apex_application.g_f12(z),
                                               apex_application.g_f13(z),
                                               apex_application.g_f14(z),
                                               apex_application.g_f15(z),
                                               apex_application.g_f16(z),
                                               apex_application.g_f17(z));
    END IF;
      END LOOP;

  • System Preferences - Display Preferences ---- not opening

    In my Snow Leopard 10.6.5 under System Preferences only Display Preferences not loading. It is giving error "System Preferences cannot be opened because of a problem".
    I tried resetting PRAM and NVRAM. Also is deleted the file com.apple.systempreferences.plist. Still it did not solve the issue.
    Please let me know how i can solve the issue.
    Thanks
    Jana

    Get a bootable, external HD (preferably FireWire, since it's 40-50% faster than USB 2 and designed for data transfers), make a bootable backup/clone before updating/upgrading, and ensure that it's bootable and works like the original. Then have your corporate IT reinstall the image and use the Migration Assistant to restore all of your customizations. See these for details:
    http://docs.info.apple.com/article.html?artnum=106941
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html

Maybe you are looking for