ID CS4 Anti-Alias problems with Linked files

All the linked files i have put into Indesign CS 4 whether they are PSD, Tiff,layered or flat have shown up slightly pixelated. When i print the same file from its native program (in this case Photoshop CS4) the files print clean and crisp and the text and artwork have clean edges but when i link the file into an Indesign CS4 doc and then print it off, the file comes out fairly clean but there are jagged lines on the text and art.
Mac OX 10.4.11
Intel Mac Pro G5
4GB Ram
2X 2.66 Dual Core Intel Xeon
250GB HD

I now understand your question and yes in the graphics tab in my Indesign print settings I have it set to send all data. I exported the indesign file as a high res PDF and the output on the printer was the same. I don't believe its a printer setting because when i switch my display performace from typical to high-res the text and art from the linked file look pixalated. On the layered psd file the text files are not converted and yet when displayed through ID CS4 the text looks fuzzy and slightly pixalated.
Any Help would be greatly appreciated.

Similar Messages

Problem with Linked Files in Cap 5.5

Hello,
I use two computers for my Cap develpoment. My laptop runs 5 and my media machine runs 5.5.
The project I'm working on is being created on the media machine using 5.5 One of the screens in the 5.5 project is simply a bunch of buttons I would like to like link to some PDF's for reading. Here's the issue.... The finished project will run off the laptop and files will need to be linked to a server drive on there.
Question is : If the files are on the other machine, is there anyway I can define the path/file if I'm NOT using that computer currently but plan to launch the finished project from there for our site to use?
Hope I've explained that right.

Hi there
Indeed you may. When you specify the link, just make sure there is no explicit pathing information preceding the file you are linking to. For example, if you are linking to a file named: SomeFile.PDF, make sure that "SomeFile.PDF" is the only thing you see in the field where you specify the file.
If you see something like: C:\SomeFolder\SomeOtherFolder\SomeFile.PDF, you will be creating an absolute link and the PDF will be expected to be found on the local C drive and the exact path of anyone using the Captivate.
After you publish, just make sure the PDF files are in the same folder as the captivate and you should be good. (There is a way to place them in a subfolder, but the simplest approach is to just plop them all together.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problems working with linked files in illustrator

Hi everyone, i hope you can help me with this doubt that had given me problems since I started using illustrator. I'm using linked files in illustrator because i'm able to modify the files later, as I do in InDesign too, but in both cases I had have a lot of problems with the links, I don't know if i'm doing something bad, but this is what I do: I create a folder where I place my file (illustrator or InDesign) and the files that should be linked. Whit this i'm expecting of it to work like an html where the links works while they are in the folder, no matter if you move the folder, the links keeps working on the HTML.
But I have noticed that it doesn't work in the same way, because, I had have cases when the links work perfectly, but then i format my computer (Mac) and after that, I open my files againg but the links don't work already. I have exactly the same problem with my coworker, because im trying to edit a file with linked files since the place where it is in the other computer, obviously it opens perfectly there, but in my computer it asked to repair the links, so I select to repair automatically but I ask me to does it manually... So this is getting me tired, because I must repair the links here in my computer to work on it, and when for it get finished, my coworker should repair the links again, and this is going to be always we share files or i format my computer. It is important to mention that my coworker and me use mac with leopard and the same version of adobe (CS4).
So, as I said before, i dont knoe if my method is incorrect, should I do something different? any option to activate? or program that I should use? because I have herd a lot of Adobe Bridge, I don't know if this could have a option that could help me.
I hope finally somebody can help me with this doubt, because im sure that I'm not the only one having thie problem.
Thanks for your help

Hi. I am also experiencing this very annoying problem. Currently using version CS2, but this problem dates back to version 9. I check the box to link a tif file, not embed it, in Illustrator. All is well until I save and reopen the file. Suddenly the file is embedded. No other changes have been made to the folders or anything else. It just embeds itself and cannot be linked again.
So far, I conclude that something in the file itself has corrupted, because it is not possible to place a new file and have it link correctly again. So if I anticipate more changes, I create a new file.
Notice the upper left corner of the top toolbar. If you click on a file that has embedded itself, the file will be identified as "Group" instead of "linked file."
I've tried all kinds of things, like trying to ungroup it, trying to release a clipping mask, and so forth, to see what went wrong. Have not figured it out.

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

Problem with URL File download

Hi every one i am facing a problem with URL File read Technique
import java.awt.Color;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
public class JarDownloader
     boolean isSuccess = false;
     public JarDownloader(String url)
          downloadJar(url);
     public boolean isDownloadingSuccess()
          return isSuccess;
     private File deleteExistingFile(String filename)
          File jarf = new File(filename);
          if(jarf.exists())
               jarf.delete();
          return jarf;
     public static void main(String args[]){
          new JarDownloader("url/filename.extension");
     private void downloadJar(String url)
          try
               URL jarurl = new URL(url);
               URLConnection urlc = jarurl.openConnection();
               urlc.setUseCaches(false);
               urlc.setDefaultUseCaches(false);
               InputStream inst = urlc.getInputStream();
               int totlength = urlc.getContentLength();
               System.out.println("Total length "+totlength);
               // If the size is less than 10 kb that means the linkis wrong
               if(totlength<=10*1024)throw new Exception("Wrong Link");
               JFrame jw =new JFrame("Livehelp-Download");
               JPanel jp =new JPanel();
               jp.setLayout(null);
               JLabel jl = new JLabel("Downloading required file(s)...",JLabel.CENTER);
               jl.setBounds(10,10,200,50);
               jp.add(jl);
               JProgressBar jpbar = new JProgressBar(0,totlength);
               jpbar.setBorderPainted(true);
               jpbar.setStringPainted(true);
               jpbar.setBounds(10,70,200,30);
               jpbar.setBackground(Color.BLUE);
               jp.add(jpbar);
               jw.setContentPane(jp);
               jw.pack();
               jw.setResizable(false);
               jw.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
               jw.setLocationRelativeTo(null);
               jw.setSize(220,150);
               jw.setVisible(true);
               int readlngth=0;
               int position=0;
               byte[] readbytes = new byte[totlength];
               while(totlength-position > 0)
                    readlngth = inst.read(readbytes,position,totlength-position);
                    position+=readlngth;
                    jpbar.setValue(position);
               File jarf = deleteExistingFile(filename);
               jarf.createNewFile();
               //FileWriter fwriter=new FileWriter(jarf,true);
               FileOutputStream fout = new FileOutputStream(jarf,true);
               DataOutputStream dout = new DataOutputStream(fout);
               dout.write(readbytes);
               dout.flush();
               dout.close();
               inst.close();
               jw.setVisible(false);
               jw.dispose();
               isSuccess=true;
          }catch(Exception ex)
               isSuccess=false;
}From the above code i received the total length of the PAGE content (i.e here url is a file) when i tried to find the size of that file it return -1.
please help me

I think the real problem is that you don't check the return value from read (it's probably less than data.length indicating an incomplete read). Isn't there a readFully somewhere?

Indesign CS6 on MACs with OS 10.8 are having problems with links

Hi
Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
Any further information required?
M. Miller

Thanks for your quick reply.
We actually noticed that there also seems to be something wrong with the timestamps:
If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
Have you heard anything similar?

Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Problem with m3u files and Quicktime

Hello:
I have made one update with Quicktime software (version 7.6.9 1680.9). The problem is that Quicktime player reproduces mp3 files but when I try to play m3u files the sound is very bad. It sounds like gargling.
For example: This files play ok:
http://www.telefonica.net/web2/sevarra/Sarabande.mp3
It plays ok when the previous link is introduced as URL address in Quicktime player, but the corresponding m3u files sounds like gargling
http://www.telefonica.net/web2/sevarra/list0.m3u
I think there a problem with m3u files and Quicktime.
Tank you very much and best regards.

I have discovered that when the URL is playing (with gargling sound) if I open the A/V controls in QT menus and I move the Jog Shuttle or the Speed level then the sound becomes good.
Yes! Great catch, ttfrank. I can replicate that too.
Interesting ... if (after getting the sound working properly again) you then pause play of the m3u, and start it again, you get the gargling/dalekish sound quality back again.
Bug reporting ... there's a couple of ways you can go about doing this. You can use the QuickTime product feedback form:
http://www.apple.com/feedback/quicktime.html
... but if you want to track progress on the bug, try instead registering as an Apple Developer (for free):
http://developer.apple.com/programs/register/
... and then you'll be able to submit the bug via the Apple Bug Reporter:
http://developer.apple.com/bugreporter/
In the meantime, there's also a restricted forum available to level 4 and 5 members ("Notable New Technical Issues") where we can report this sort of thing. I'll try to get a post written up on the topic there later today.

Problem with NEF files from Nikon D4

Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?

This question used to be answered in the FAQ before they revised it. So, here we go again. ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings. It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images. Lightroom does not read those settings from Nikon cameras or any other brand of camera. Part of the reason is that different camera makers store those settings differently.
When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it. Then I saved those adjustments as my default settings for the camera. From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images. Of course, I still have to make individual adjustments. But my default settings greatly reduce the amount of how they work that I have to do.
Active D-lighting is is one of those features that Lightroom does not recognize. You would be well advised not to use it, or else create a preset to simulate its effect. It will provide no benefit to your Lightroom work.
This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
I realize this question was asked in the ACR forum and I referenced Lightroom throughout. But the principle is the same, and the recommended procedure is the same.

RH7 problem with FPJ files

We are having a problem with missing files in R7. I've never seen all the files become .FPJ files. They were .htm files and now they are all .fpj - not sure what to do besides change the file extension and try to import all the files back into the project. Our group is quite perplexed.
Result after trying to change file extension:
No success in this.
We still have an output, so we have the .htm files with the content, so we'll be recreating the project.

Suzie
I have created a new thread as your problem relates to RH7, not the RH8 problem that is running currently. Also I have moved it to the RH HTML forum as it is specific to that edition.
I cannot say RH did not do that but I completely fail to see how. Unlike some specialised programs, RH has no function to change file extensions and if reverting it to HTM does not put things right, then I would say something else has clobbered your project.
You say you are going to use the output files. That is not a simple task. The link below explains what you will need to do.
http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/062004.htm
You will still lose various features introduced in later versions of RoboHelp. My Opening RH Projects may help you there, depending on whether other file extensions have been affected.
Do you not have any backup procedures in place?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

Problem with links on email templates

Problem with links on email templates
Hi,
We have been having issues with links on our email templates. Some of the links point to the following URL:
http://server'sname/thirdparty/FCKeditor/editor/fckeditor.html?InstanceName=emailTemplatesDTO.htmlBody&Toolbar=NewscaleFCKEditorToolBar#URL
Sometimes we get “Unknown internal error” on the web page.
Can anyone help or advise on how to resolve this issue?
Many thanks,
Wesley.

Hi Wesley,
This is rather late, but we've seen the same thing frequently (and I believe can replicate it). It's caused when you a creating a new email by copying the content of an existing one with a name space in it.
Upon copying, the link gets scrambled. The approach we use is to copy the email in to a new template, then strip out all of the URL links and add them back in.
Thanks!
Ant

Problem with links for external user

Hi,
We´re using SAP NetWeaver Portal 2004s SPS 10 and we have a problem with links within notification-mails:
The link to the document (e.g. within a subscription mail) consists of "http:///...". Only user using the portal within our network can open this links. All external user can´t open this links. How can I change the URL so that our external user can open the links, too?
Thanks for help,
Sven Keller

We already have another URL for external usage. My problem is how to define that created links to documents and folder are automatically using the external URL.
If somebody receives an email (e.g. subscription) the URL to the folder is:
http://<portalserver>:51000/irj/go/km/navigation/documents/Public Documents/Documentation
But it should be:
https://<externalportal>/irj/go/km/navigation/documents/Public Documents/Documentation
Message was edited by:
Sven Keller

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

ID CS4 Anti-Alias problems with Linked files

Similar Messages

Maybe you are looking for