[ID CS6] Having the project build directly into the Plug-ins folder - Xcode

Hello everyone
I'm just starting to develop plugins for InDesign CS6 on Mac OS X. After building the project, I currently move manually the plugin into the Plug-ins folder. It is said in the documentation that for having them directly into the Plugins folder, we need to specify it in the ID_SDK_DIR variable in each Target on Xcode. However, I can't find that variable anywhere and I have no idea what I should do in order to accomplish it.
Thank you in advance for your help, and I'm sorry if it's a very naive question.
Regards,
Dave

Hello,
Look for BUILT_PRODUCTS_DIR.
P.

Similar Messages

Why do I keep getting the message that iTunes is quitting working? I have reinstalled iTunes and I have checked the WiFi twice. I have even put the internet cable directly into the laptop and still I cannot connect to the iTunes. Offers no solutions.

Why do I keep getting the message that iTunes is quitting working? I have reinstalled iTunes and I have checked the wifi twice. I have even put the internet access cable directly into the laptop. The message says that windows will look for a solution but never offers any solution.

Try disconnect your internet, then launch iTunes.
Connect your device, then reconnect your internet.
See if this resolves the issue.

I have been given a second hand mac pro that does not have a wifi card in it. my router is down stairs so can not connect the mac pro direct into the router can i use my time capsule which uses wifi to my router to connect to the internet?

I ha

If you have a non-Apple "main" router, then "join" would have been the only way it could connect.
Unfortunately, the Time Capsule does not provide any routing functions in this type of setup, so the Ethernet ports are not enabled in this setting.
If you have an Apple "main" router, it may be possible to enable the Ethernet ports in another type of setting. Then you could connect the old Mac to one of the Ethernet ports on the Time Capsule for Internet access.

Maintain dimension members directly into the data base

Hi,
We need to update the dimension members directly into the data base.
Instead of going into the administration and entering manually.
I tried just updating the table mbr and dim. but that didn't work.
Any insight on that?

To update the dimension members from the backend tables, update the mbr<dimension>> table and process the dimension either from BPC Admin Console or a SSIS BPC Admin Task. The dimension processing will automatically update the dim<<dimension>> table in the backend.
However, the updated dimension members can not be seen from the frontend in the BPC Admin. To see the updated dimension member sheet in the current client machine, use Export Dimension option in BPC Admin Console.
To see the updated dimension an all client machines and get reflected in the current view, please follow this URL:
Re: BPC 7 MS Update dimension (Make_dim task)
Hope this helps.

How do I import an Iphoto Project (book) directly into Aperture 2?

I have a book that I did as a project in iPhoto '08 that I would like to import directly into Aperture 2 and "redo" the book using Aperture's new features.
Although I imported my iPhoto library I don't seem to have this project in Aperture and when I look to export the project from iPhoto it wants to export it as a movie.
Since the photos from iPhoto are in Aperture I figured that importing the iPhoto project would be easy. I don't want to recreate the book again if I can help it - I just want to import and modify it in Aperture.
Is it possible to do and can anyone tell me how to do this?
Thanks,

You CAN completely customize the text in iPhoto books, including left/center/right justifications, and it is fairly easy. Here's the workaround:
1) In your iPhoto book (or calendar or whatever) layout, highlight the text you want to modify or change its alignment.
2) Launch TextEdit and open a blank document. Paste the text from iPhoto into the document.
3) Still in TextEdit, highlight your text. Using ordinary word processing methods, modify or realign your text as desired. When satisfied, highlight the customized text and copy it.
4) Back in iPhoto, paste the newly modified text you just copied from TextEdit into the desired text box, overwriting (or deleting first) the original text. All the modifications you made in TextEdit should apply.
This trick can work wonders for helping make an iPhoto book completely your design.
--bosskev

Do I have to plug my ipad mini directly into the mains for a reliable charge?

I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. This is a bit inconvienient as I don't have enough sockets and I like to use my ipad as a clock radio with TuneIn so when I wake up my battery is about 40% even though its been plugged in overnight.

This is unclear and confusing...
Lorraine Broadhurst wrote:
I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. ...
iPad Charging
"The fastest way to charge your iPad is with the included USB Power Adapter.
iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

Hide certain templates in the Project Builder

Hello friends,
Is there any way that we can hide the templates like activity element, milestone, PS texts in the project builder.
As we are not using those templates we want to hide those as those are creating lot of confusions from the end users.
We have a requirement to hide it.
Any suggestions to achieve it will be helpful.
Regards,
Lohith

Hi...Lohith...
you can use the following function modules to accomplish this (for all your users without having them make the changes on their own)
CNPB_W_READ_PREFS_FROM_DB
(needs the user id's to read preferences...)
CNPB_W_WRITE_PREFS_TO_DB
(in this one you change the preferences of the users to suit your needs, and the necessary indicators, like deactivate activity elements etc)
and also CNPB_W_SET_PREF_VALUE to change prefs for your userid (for testing it)
You can try in a test envinronment FM: CNPB_W_SET_PREF_VALUE and set values of parameters 09:activity elements (' ' or 'X') 10:materials etc....
(after you run FM in se37 goto CJ20N project builder to check on your userid's changes)
Try it and let me know...(we have done it for some users and it works)
Cheers
Panagiotis

I copied my PS CS5 Plug Ins folder into my CS6 one & it started having problems opening & errors...

I copied my PS CS5 Plug Ins folder into my CS6 one & it started having problems opening & errors... would someone be able to tell me what the basic/original ones should be in PS CS^6 Plug In folder please?

That would be any other plug-ins you've installed after Photoshop. Out of the box that folder is completely empty with Photoshop CS6.
To be completely accurate, what you did wrong was that you copied plug-ins that were supplied by Adobe with the earlier version of Photoshop. Those plug-ins logically conflict with the current ones Adobe supplies with Photoshop, which are now provided in another place.
They've changed the folder structure, so no longer are any plug-ins supplied by Adobe put in that folder. Hopefully for a future version update you can copy those you have in Photoshop CS6 without getting yourself into the same trouble.
-Noel

Flash Builder doesn't rebuild the project everytime I modify the code

Hi,
Flash Builder doesn't rebuild the project everytime I modify the code.
I find myself chasing ghosts when trying to debug my project. Flash Builder 4.0 doesn't rebuild my project after every change I make.
The "Project - Build Automatically" is of course selected. To make sure the problem is real I ran "Project - Build All" several times. Nothing helped.
For example, I am using a boolean constant to select different code in an if block. Even if I change the value of the boolean, When I debug the code, I see that the constant's value doesn't change. Only If I log out login again, FB will rebuild my code.
This happens too many times and it is very confusing to debug, when you don't know if the result now is with or without your changes.
It also affects the following:
- breakpoints that are set or disabled are not taken into account and the debugger will skip them even if they are set or stop on them if they are disabled.
- the debugger stops the debug on empty lines, if those lines previously contained code.
- When I comment out the declaration of variables. Eclipse doesn't recognize them and doesn't show any hint on them when you hold the CTRL key and hover over, but while in debug mode, when you hover over the variable instance, its shows a value for it.
Thanks for your help.
Bye,
RaamEE-IL

The problem is with the SDK settings selected for the Compiler.
Try going to 'Project' > 'Properties' > 'ActionScript Compiler'.
Now, in the 'Flex SDK section', try changing the SDK. Click on 'Apply'.
This will force FB to rebuild all settings for the project.
You can try again. FB should now have started compiling with latest code changes again.
Please Note: This is not a permanent fix though!
In case the problem re-occurs, you'll need to again perform the steps mentioned above to get FB back on track.

I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year. Some how the birthday did not populate the photo calendar. Is there a way to add the birthday iCal calendar into the calendar project?

I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action.

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

HT1586 Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

AppleTV has no analogue connections.
It has HDMI which can go to your TV or in theory to an AV receiver equipped with HDMI inputs.
Some HDMI amps/receivers and HDMI switches can cause glitches with AppleTV but it really depends on the particular device.
AppleTV also has optical out, so if you only wanted a connection for Dolby Digital or stereo feeds from the AppleTV you could connect AppleTV to teh TV via HDMI and also run optical to the amp.
Audio is output over HDMI and optical simultaneously.
AC

Do I need an audio interface between my roland keyboard, garage band/MAC and Alesis 8.0multitrack mixer, or should I go direct into the USB of the Alesis with my keyboard into the mixer?

Do I need an audio interface between my roland keyboard and alesis 8.0 multitrack mixer when interfacing with Garage Band? Or can I just go direct USB MAC into the Alesis Mixer with keyboard directly into the Mixer? ie, is the interface overkill?

First of all the Alesis 8.0 is a usb audio interface so you already have a interface. Next you could go from the Roland into the Alesis into the Mac. You could also go from the Roland headphone or line out into the Mac Pro audio input. And depending on what Roland keyboard you have, you may be able to use Midi (usb) and use the Macs Midi voices.

[ID CS6] Having the project build directly into the Plug-ins folder - Xcode

Similar Messages

Maybe you are looking for