ID : interface determination - Interface mapping (file- IDOC with externa)

Hi,
scenario : XML file read and mapped to Multiple IDOC in single message
all IR stuf are done but in the ID I cannot choose the mapping interface
here is a document of everything that was done...http://docs.google.com/Doc?id=dcsvs2n3_51jnrfw6
Thanks for the help

Hi Stepen,
Simple for Reciever Business System did you add the Idoc itself that was imported as Receiver Interface..
Just double click the Receiver Business System and Then click Receiver and See if the IDOC name exists other wise insert it...
Also In the Interface determinatin select the actual idoc that you imported and not the XSD....
Finally if the above doesnt work Try this since you are using ED create Message Interface and mention the xsd as MT.... and in Interface Determination use the Actual idoc imported and not ED ....
Regards,
sridhar
Message was edited by:
sridhar reddy kondam

Similar Messages

IDoc with external product sets

Hi
which IDoc type is used for products in LSMW? How can I add my external sets with my attributes do standard IDoc and how does it works?
best regards,
ml
*Moderation: Tri-plicated:
IDoc with external product sets
IDoc with external product sets
IDoc with external product sets
Please, don't ask same question in multiple forums*
Edited by: Joaquin Fornas on Nov 10, 2011 1:02 PM

see note 546868.

IDoc-to-File scenario with external Partner ... PCK necessary?

Hi all,
I have a question concerning to a IDoc-to-File Scenario with an external Partner. Here is a short Description of the Scenario:
The SAP ERP System creates an IDoc which should be send to the SAP Integration Server. The Integration Server respectively the IDoc-Adapter transform the IDoc in IDoc-XML. The Integration Server executes a Mapping and so on. In the final step the Integration Server should send the XML-File to a FTP Server in New York (external Partner) with the File/FTP-Adapter.
Have I to install the Partner Connectivity Kit at a Server in New York or is it working without the PCK? Which are my possibilities?
Thanks for your help
with kind regards
Christopher

Hello,
If the FTP server has connectivity to XI and if the
port is open XI can directly do the FTP using File
Adapter.
Thanks,
Himadri
Hi,
thanks for your quick answer.
What means "connectivity to XI"? Our SAP-Environment is in Germany and the FTP-Server is in New York. Is it enough to open the port in the firewall?
Thanks for your answer
Christopher Kühn

How do Map files work with a Windows application?

I need confirmation on how map files work.
I have created a map file previously and have updated the HTML help with a few new topics and changed the Title on a handfull of topics.
The map file setup is done for the new topics, but I am thinking I need to "fix" those topics whose title has changed.
I have opened the Map.h file I created and looked at the references, for simplicity sake lets say it looks like this:
#define Dials_Setup 1
#define Project_Setup 2
#define Scenario Scenario_Setup 54
I assume the mapping process goes like this:
(1) I hand off map file and the CHM help file
(2) Developer addes the ID of "2" to the Project Setup window form
(3) When the user is on the Project Setup window, they press F1
(4) The Project Setup window form gets the ID of "2"
(5) The Map.h file translates the "2" to "Project_Setup" topic title
(6) The CHM is opened to the topic with a title of "Project_Setup"
So, if I changed the title of the topic from "Project_Setup" to "Project_Setup_Window" would I have to update the line item in the Map.h file from "Project_Setup" to "Project_Setup_Window" for the mapping to work and the client to see the correct topic when the press F1?
I am thinking these all need to be in sync between the Map.h file and the CHM file.
As always, thanks for any guidance.
Michael F Weart

Hi, Michael
You have it right - basically. I'll just add a few notes.
Yes. Typically you would give the .h and the .chm file to the developer. However, sometimes the developer will give you a .h file created from their IDE tool (e.g., Visual Studio). In that case, you would Import the .h file into your RoboHelp project and map it that way. Or it can be a combination as long as there are no duplicates of Map #s or Context IDs. Another tip: You can also generate a Map File Report (Tools > Reports > Map IDs) which can be a handy guide for the developer.
Note: The alphanumeric string for the Context ID (sometimes also called a Topic ID) does not necessarily have to be formed from the Topic Title. The reason it may seem that way is because RoboHelp uses the Topic Title as a matter of convenience to help you keep track of the which topic is being mapped. The main thing is that there are no duplicates and RoboHelp has a report for that as well. In Microsoft HTML Help (.chm), the actual mapping from the .h Map # to the URL of the actual topic can be found in the .ali (alias) file which can be found in your Project root. The .ali file is compiled into the .chm itself.
Here is a good Online Help topic with more details:
http://help.adobe.com/en_US/robohelp/robohtml/WS5b3ccc516d4fbf351e63e3d11aff59c571-7ff9.ht ml
Rob Chandler has really good documentation for Microsoft HTML Help which you will find here:
http://helpware.net/htmlhelp/how_to_context.htm
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Using FAT files system with External HDD in SL

is it safe to store files in an external hard drive formatted as FAT? or should i format as HFS+? Is there any possibility that OS X will damage its data?

It depends on the type of file. While loose files generally can be safely stored there, FAT32 drives can't be used to store a bootable copy of Mac OS X, applications, or content such as an iPhoto library.
(101652)

Mapping shipment idoc with XI internal structure.

Hi,
we are sending shipment idoc to PI system, there mapping is required like
for each Matnr of EIEDT43 , we need to map with EIEDL24-ARKTX with XI data type structure
where material number and Item description field is at same level but in idoc it is not.
Regards,
Mayank

for each Matnr of EIEDT43 , we need to map with EIEDL24-ARKTX with XI data type structure
where material number and Item description field is at same level but in idoc it is not
If i try to make out some sence out of your post ..it would be like you have an idoc to file scenario ,where you are trying to map a particular IDoc field under subsegments and for each occurance of the segment you need to create a field in target.
you can handle this easily if you try understanding context handeling in mapping.
http://www.riyaz.net/blog/xipi-introduction-to-context-handling-in-message-mapping/
specify your requirement clearly or frame a question.
Regards,
Anika

File to IDOC, with External Definition to hold multiple IDocs

Hello Experts,
I am configuring a sample File to IDOC scenario. Here are the steps I am following, can you please guide me what I am missing here.
I am having a flat file with 10 records to be transferred to my ECC system through IDOC adapter to create 10 different IDocs.
1. I am picking up my flat file using a 3rd party Business System with File Content Conversion
2. I uploaded CREMAS Idoc and exported as XSD file and modified Occurences paramter to unbounded and uploaded back as an External file definition into IR
3. I defined an SAP WEBAS ABAP type Business System with LS (representing my ECC system) and configured with IDOC Rcvr channel.
4. In the IDOC recvr Channel, I specified RFC destination pointing to my ECC system & Port, Release...etc
5. On the ECC side, I configurated a PARTNER PROFILE with the above mentioned LS(used in step 3) and added an Inbound Idoc paramter CREMAS with process code CRE1. Selected the option Trigger Immediately.
Testing:
1. When I checked my CC monitoring in RWB, my file on the sourced is getting picked up successfull with respect to the specified polling intervals.
2. I don;t see any messages in my SXMB_MONI. I verified SXMB_ADM configuration it looks fine to me
3. I used TCode:WE02 on ECC side, nothing is there
4. I used Tcode SM58 on ECC side, nothign is there
I have no idea what is happening after successfully picking up the file on the source side.
Is there a way to trace where exactly the error is or what is wrong with my scenario?
Just an observation, We don;t need to specifiy any LS on the Sender Business Sytem(3rd party in my case) which picks up my file on the source side. Rather I am specifiying LS on the Target Business Sytem(type WEBAS ABAP in my case) to send my IDOC to ECC system. I am using the same LS to define PP on ECC system.
Edited by: Chris Rock on Oct 21, 2008 5:03 PM

Aamir,
I tried full cache refresh, also cleared SLD Cache for both IR & ID. No luck.
I think either some thing wrong in connection parameters, but atleast if I see some error in Moni or RWB, it helps, but in my situation, nothing is showing up there.
Connections:
I specified PORT & RFC Dest in IDOC RCVR Adapter along with WEBAS Release version. These PORT & RFCs are created in XI using SM59 & IDX1 and both passed the connection test.
On the ECC side, I created a PP with inbound Idoc CREMAS and process code as CRE1. This PP uses the LS that was used in RCVR BS specified in XI side.
I also loaded Idoc meta data into XI with Tcode: IDX2
Please help me, any body. I will sincerely award the points.

Import Map file failes with single/Multiple Occurance

Hi All,
Using a file I mapped the source and target structures.. The source file has one multiple occurance node . so I used look up option in source table and mapped with target fields...saved the map..
When I used the following XML file .. I used the same map created befoe... I see the Remote System fields are not failed to map to target structure.. How can I get rid of this issue....
<Product>
--<Name>Rajeev</Name>
--<REMOTE_SYSTEM>
<Z_MDM_REMOTE_SYSTEM>
 <Z_MDM_SYSTEM_NAME>Panaroma AW Customer ID</Z_MDM_SYSTEM_NAME>
 <Z_MDM_VALUE>600013</Z_MDM_VALUE>
 <Z_MDM_VALUE1>600011</Z_MDM_VALUE1>
 <Z_MDM_VALUE2>600012</Z_MDM_VALUE2>
</Z_MDM_REMOTE_SYSTEM>
--<REMOTE_SYSTEM>
</Product>
Using above I saved the map.. Its fine.. I am able to import data in to MDM..
When the file has multiple values of remote system as shown below then field are unmapped... vice versa is also the same..
<Product>
--<Name>Rajeev</Name>
--<REMOTE_SYSTEM>
<Z_MDM_REMOTE_SYSTEM>
 <Z_MDM_SYSTEM_NAME>Panaroma AW Customer ID</Z_MDM_SYSTEM_NAME>
 <Z_MDM_VALUE>600013</Z_MDM_VALUE>
 <Z_MDM_VALUE1>600011</Z_MDM_VALUE1>
 <Z_MDM_VALUE2>600012</Z_MDM_VALUE2>
</Z_MDM_REMOTE_SYSTEM>
<Z_MDM_REMOTE_SYSTEM>
 <Z_MDM_SYSTEM_NAME>Panaroma AW Customer ID</Z_MDM_SYSTEM_NAME>
 <Z_MDM_VALUE>600013</Z_MDM_VALUE>
 <Z_MDM_VALUE1>600011</Z_MDM_VALUE1>
 <Z_MDM_VALUE2>600012</Z_MDM_VALUE2>
</Z_MDM_REMOTE_SYSTEM>
--<REMOTE_SYSTEM>
</Product>
Do I need to create a seperate map for multiple iteration and single occurance..OR missing some thing? Please advice..
Thanks
Rajeev

HI Ravi,
May be I took the wrong example..
I am not talking about remote systems... I am talking about XML source file.. If the XML source file consist of single occurance of any qualifier table then those qualifier table fields are not mapping.. IF I used the base file as multiple occurance Qualifier table....
In the same way if I use base file as single occurance of Qualifer table .. Qualifier Fields are not getting mapped if the source file is single occurance..
Suppose :If I use the base file as this and save the map.. I am able to import files whcih are single occurance of EMAIL...
Fields are not getting mapped if the EMAIL occurnace is multiple.....
<Product>
--<Name>Rajeev</Name>
--<EMAIL>
<Z_MDM_EMAIL>
<ID>ABC_yahocom</ID>
<TYPE>TEMP</TYPE>
</Z_MDM_EMAIL>
--</EMAIL>
</Product>
In the same way: If I use the following XMl as base and create a map and save it.. Able to import files which had email occurance multiple.. Unable to import data and the fields are not mapped ......
<Product>
--<Name>Rajeev</Name>
--<EMAIL>
<Z_MDM_EMAIL>
<Z_MDM_EMAIL>
<ID>ABC_yahocom</ID>
<TYPE>TEMP</TYPE>
</Z_MDM_EMAIL>
<Z_MDM_EMAIL>
<ID>CDE_yahocom</ID>
<TYPE>TEMP</TYPE>
</Z_MDM_EMAIL>
--</EMAIL>
</Product>
Please advise.. Thanks Rajeev.

Suddenly renames files edited with external editor

Not sure what I have done but now when I "edit file with..." (Photoshop CS5) using Aperture3 the version name is changed in Aperture. Looking in PShop it is dislapying the correct masterfile name but on return to Aperture3 it is changing the version name. When I have finished in PShop I just close and it says "save". I click "Yes" I don't do any "Save As..." to confuse things. Aperture is now changing the version name using a prefix and counter that I used for file imports on a job about 3 shoots previously so not even the most recent one! How do I get it back to creating a version (PSD file) with the same name as the master.
Thanks for reading this.
Jules

Thanks TD for your input. While I could not get the rebuild to work (it would show 97% done then hang up), it helped me isolate the problem. I ended up deleting all the images that were edited by PS CS4 then tried to do the rebuild again. Still no luck. I then opened the file sans the edited PS images and it worked.
I then edited one of the images using PS CS4 as the external editor and that worked. I then exported the image to the desktop and that also worked. The only think I can think of is that the original edits were done in iPhoto 9.0 and I have since updated it to 9.1. Whatever - it works and the only loss were some edits on a dozen or so family candid shots.
Your help in getting me headed is most appreciated.
Ed

Allow Opening Of Non-PDF File Attachments With External Applications

If this is an Adobe initiative, then "grrrr, thanks a lot". Or, is this something on our local end?
Lately we cannot open Excel (.xls or .xlsx) and Word documents (97-2003 or later versions) out of a PDF potfolio. We upgraded to Reader 9.4.6 and I think it was around that time (maybe even 9.4.5) that this ability went away. In the versions we have you cannot check "Allow opening on non-PDF....." as it is greyed out. Is this where you allow .doc and .xls files to open?

I too am having difficulty after upgrading to 9.4.6, but I am unable to open PDF files from my web browser (both Chrome and IE). If I edit my preferences and allow the PDF to open in the browser window, I can see them, but opening the application from a web page does not work.
Turning pop up blocker off/on does not make a difference.
Other files seem to open fine.

File Transfers with External Hardrive

My computer's hardrive was filling up because it is the family computer, so i purchased a 320 gig external hardrive for my music. in the past when i have moved my music to different files i get a grey exclamation point in front of the song and i need to locate the song in order for this to work. i have many songs and would like to transfer them to the external hardrive without having to individually locate them all. is this possible?

Sure, first thing to do is make sure your exHD has a letter pretty far down in the alphabet so Windows won't do any funny stuff and change that drive letter on you when you plug in other USB devices.
(if the drive letter changes you'll get the ! all over again)
Then, follow the directions from this article to consolidate your library.
http://support.apple.com/kb/HT1364
I would hold off on steps 11 & 12 until you're sure it worked properly.

Missing Interface mapping in XI Configuration

Hi all,
I am learning the IDOC XI File Scenario using BPM.
In the design part I have created message Interfaces as
Abstract Asyn -
IDOC
inbound Asyn------(Inbound Interface)
Asynch Abstract----
Inbound.
Did the message mapping between IDOC and Abstract Asyn IDOC and
Abstract Asyn IDOC and Asynch Abstract(Inbound).
In the Configuration of XI:
First Reciever Determination
service -SAP system
Interface - IDOC
Reciever -BPM business service
Interface -IDOC abs asyn
Interface mappings - IDOC and Abstract Asyn IDOC
Second Reciever Determination:
service -BPM
Interface -Inbound Abst Asyn
Reciever-business service for File
Interface -inbound Asyn
But the Interface mappings I cannot able to configure it as it is not recognised (No object found error ).
How to solve this?
Need help........!
Thank you.

Hi,
Did you create an Interface mapping between Idoc interface and Inbound interface ?.
if so it will appear over there.
BTW, why are you using BPM here? Are you collecting the idocs ? if so the mapping should come inside the BPM.
If it is a simple Idoc to FIle scenario using BPM then
You need to have one Inbound Aysnc Interface. One Idoc Abstract Interface.
Check this blog for simple case-
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards,
Moorthy

File to IDOC With Screenshots

Hi,
I am doing FIle to IDOC scenario but have got stuck in ID part what to take care in Receiver COmmunication Channel and Receiver determinaiton etc and donot know how to test after finishing ID part.
ALso we need to put xml file as input in directory but how we get IDOC activated from, and where to see whether our FIle to Idoc scenario is running fine.?? NOt clear pls help
Surbhi Bhagat

Surbhi
Create Receiver Determination
Sender Service :File system
Sender Interface : Outbound Interface.
Configured Receivers - SAP R/3 system
Interface Determination
Sender Service :File system
Sender Interface : Outbound Interface.
Inbound Interface : IDOC Interface mapping : File to IDOC Mapping
Receiver Agreement
Sender Service : File System
Receiver Service : SAP R/3
Inbound Interface :IDOC
Receiver comm Channel : IDOC Comm.Channel(Receiver)
Don't forget to give the Header mapping.
Give Sender service & Receiver service.
I hope it helps!!!
Best regards,
raj.

Interface mapping not shown in directory search help

Hi,
I creatd a interface mapping in repository with message mapping. but when i configure the directory for receiver determination .. the interface mapping is not shown when i click the search help.
pls any one help me .
thankx,
shree

Hi Shree,
Three checkpoints:
1. Make sure you have entered the correct outbound and inbound interfaces.
2. Make sure you have activated your interfaces and mappings.
3. Make sure the cache is up-to-date (you can refresh cache by transaction sxi_cache).
Hope this helps.
Regards,
Hart

How to Rename a Topic ID in Map File to Avoid Conflict with Another Program?

Robo 8 HTML:
Can somebody assist me in understanding how to rename a topic ID in my map.h file?
An application programmer informs me there are nine topic IDs (shown below) in my project map file which conflict with predefined names of constants/functions from the Visual Studio Libs program and, is requesting I change the names of the topics listed below to resolve topic ID conflict in order to enable F1 call for these topics.
#define Open 59
#define Save 60
#define Print 63
#define Cut 72
#define Copy 73
#define Paste 74
#define Clear 75
#define Status 81
#define Substructure 139
Can I simply alter the topic names and retain their associated map numbers in <Create/Edit Map ID> dialog to resolve the map file conflict with Visual Studio Libs program functions? Or, is there more work involved in changing a topic name in a map.h file?
Any assistance with this question is greatly appreciated.
Thanks,
robert

Hi,
Simply renaming the TopicID's in the .h file won't work. The TopicID is used in the alias file (projectname.ali) to link a map number with a topic. Also, you can use either TopicID's or map numbers to call the help. (Using TopicID's only works for WebHelp afaik.)
If you use map numbers to call the help, you can rename the TopicID using the mentioned dialog. No problem.
If you want to change the ID from the files, you have to change both the .h file as the .ali file. No changes to topics needed.

ID : interface determination - Interface mapping (file- IDOC with externa)

Similar Messages

Maybe you are looking for