Identifying Performance of inheritance/relationship for EH&S module
Hi Team
We are using EH&S module and currently, when our users create a specification and perform inheritance, it takes about 7 to 10 minutes to complete the change to refresh. Is there any method or logs we can idendify in the server sites/module on this time tracking. If there is, could you provide or guide way to check.
If there are other ways to check this, please let me know. Thank you.
hello Kannan
there are a lot of OSS available regarding topic of performance in CG02. You should check if you need to install further OSS. On the top with EnhPAck 3 Inheritance was improved. Therefore please check this option. May be performance will go up.
What is the relation between the specification whcih gets data and that which passes on data? Is this 1 1:1000 ? Inheritance is not recommended by SAP (nbot to my knowlegde); it is a useful option and to a certsain extend better than to use "reference".. But there are a lot of "cons", The "cruciasl" topic is the inheritance template (as an example):
So please check EnhPack 3 options and check OSS. I found not "direct" related performance OSS inmprovement to inheritanace but many others exists as well discussing performance.
C.B.
Similar Messages
-
Could Not Establish trust relationship for the SSL/TLS secure channel Sharepoint Web services
I am trying to updateList items into a sharepoint list from the xml document stored in my shared drive in remote server. To make that work i wrote down a Powershell Script that utilizes Sharepoint Webservices Api Updatelistitems function to perform the acitivity.
I ran the script over in Dev environment it works, Then i went into QA that Works too. At last i am now in PROD and agains ran the script i am now receicing following error:
New-WebServiceProxy : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel
All of my servers dev, QA and PROD web apps are encrypted by Https 443 using Cerified root certificate. Powershell script i am running are mirror copy. System accoutn i am using has owner privileages to sharepoint site and its list.
Am i missing something here, what is blocking this traffic i have no clue.
Thank Youare u using self singed certificate?
also check this http://www.poshpete.com/powershell/new-webserviceproxy-and-ssl
http://www.brainlitter.com/2012/03/13/sharepoint-2010-and-cert-trust-could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Partner Relationship for Product
Hi,
I have added partner relationship for product with specific start/end dates values (In my case, I added driver relationship for vehicle through CIC0 transaction).
Through transaction only date (without time) is displayed, while in database the fields DATE_FROM, DATE_TO are stored as timestamps (Which means both date and time value).
I want to manage the relationships in lower level and allow different partners of same partner function on the same day, but in different hours.
Is it possible to define the date range of partners relationships as date+time instead of date only, or only date (without time) is being taken into account (and therefore such change is meaningless)?A few extras, please reward points.
Tables
Access to table information is controlled across the system by GUID values. These are Global Unique Identifiers.
In general:
CRMCxxxx = Customising
CRMTxxxx = Customising
CRMDxxxx = transactional
BUT* = Customer Master
CRMD_ORDERADM_H = Document Header Table
CRMD_ORDERADM_I = Document Line item Table
CRMD_LINK = Lists various link GUIDs, to
access order Information
CRMD_PARTNER = Partner Table
BUT000 = ~KNA1 Customer Master General Data
BUT020 = Address Link Table
ADRC = Address Details (Master Data)
ADRV = Address Details (unique to orders)
CRMC_PARTNER_FT = Partner function Description
PRCD_COND = Pricing Conditions
CRM_JEST = Status Table
COMM_PRODUCT = Materials General Table
SCATTSEG = Valid from/ Valid to
CRMD_SALES = Sales Data
(reference data)
CRMD_SCHEDLIN = Schedule Line item
CRMD_ORGMAN = Organisational Data
CRMD_PRODUCT_I = Line item product detail
PROCESS_QTY_UNIT (EUR)
Example: You want to list all complaints that partner no 31 appears as a header partner, and the partner functions:
Select PARTNER_GUID from the table BUT000.
Get all instances of that partner in the order/partner table:
Select GUID PARTNER_FCT from CRMD_PARTNER
Where PARTNER_NO = BUT000-PARTNER_GUID.
Then get the order guid from the link table:
Select GUID_HI from CRMD_LINK
Where GUID_SET = CRMD_PARTNER-GUID.
Get the Order No:
Select OBJECT_ID from CRMD_ORDERADM_H
Where GUID = CRMD_LINK-GUID_SET.
Link Table:
_HI refers to a Order Header or Order Line Item
GUID_HI = Header/ Line item Guid
OBJTYPE_HI = 05 = Header
06 = Line item
_SET refers to the subset of data
GUID_SET = Subset GUID
OBJTYPE_SET = 07 = Partners
11 = Sales
21 = Orgman
29 = Subject -
ORA-00205: error in identifying controlfile, check alert log for more info
Hello All,
I am performing my first Collab Suite install in quite some time and I have successfully installed Collaboration Suite on Linux Red Hat AS 4. I first performed an infrastructure installation for the Collab Suite database which completed with no errors, however, it appears that no control files were created in my $ORACLE_HOME/dbs directory during installation. I am also unable to specify their exact location in the initSID.ora file as I am unable to find them in any other directory on my server. The database starts despite the control file error, as you can see from the second SQL*Plus prompt. However, I am unsure how to create the control files or correct this error. Any assistance would be greatly appreciated!
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 09:51:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 100663296 bytes
Fixed Size 778024 bytes
Variable Size 99623128 bytes
Database Buffers 0 bytes
Redo Buffers 262144 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
======================================================================
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 11:18:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected.
SQL> startup nomount
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining optionsControl files are database-specific, since they contain information describing the database (location of data files, etc.) You can't copy them from one database to another.
Do you have a backup? -
Could not perform Write (Inherited Error)
hi
Can anyone let me know what is this error and how to solve this.
Could not perform Write (Inherited Error)
this got this error after I started DM Package in BPC NW at Load the flat file to the server.
regards
arkHi Ark,
To check member access profile where access to your dimension has been given,
Go to User(Your user name)>Check which member access profile is assigned then GO to->member Access profile>Modify Member access profile>all the applivcations are listed there.select Your Application>You find dimesnions->Look for Access i.e.Read or Write access.
Try this..
Regards,
Naresh.K -
How to identify the follow up relationship between two service ticket
Hi Folks,
How to identify the follow up relationship between two service ticket ?
Please help me on this...
Regards,
Shashi K, ReddyHi Pepe !
Thank you for the answer, but I dont find this structure ET_DOC_FLOW.....
Please let me know is that structure is correct ......
Regards,
Shashi K, Reddy
shashikumarreddy at gmail dot com -
Hi Friends
I am having performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA) and one my client got over 8 thousend employees . This function-module taking forever to read the data. is there any other function-module to read the absences data IT2001 .
I did use like this .if i take out this F.M 'HR_TIM_REPORT_ABSENCE_DATA_INI' its not working other Function-module.please Suggest me .
call function 'HR_TIM_REPORT_ABSENCE_DATA_INI'
exporting "Publishing to global memory
option_string = option_s "string of sel org fields
trig_string = trig_s "string of req data
alemp_flag = sw_alemp "all employee req
infot_flag = space "split per IT neccessary
sel_modus = sw_apa
importing
org_num = fdpos_lines "number of sel org fields
tables
fieldtab = fdtab "all org fields
field_sel = fieldnametab_m. "sel org fields
To Read all infotypes from Absences type.
RP_READ_ALL_TIME_ITY PN-BEGDA PN-ENDDA.
central function unit to provide internal tables: abse orgs empl
call function 'HR_TIM_REPORT_ABSENCE_DATA'
exporting
pernr = pernr-pernr
begda = pn-begda
endda = pn-endda
IMPORTING
SUBRC = SUBRC_RTA
tables
absences = absences_01
org_fields = orgs
emp_fields = empl
REFTAB =
APLTAB =
awart_sel_p = awart_s[]
awart_sel_a = awart_s[]
abstp_sel = abstp_s[]
i0000 = p0000
i0001 = p0001
i0002 = p0002
i0007 = p0007
i2001 = p2001
i2002 = p2002
i2003 = p2003.
Thanks & Regards
Reddyguessing will not help you much, check with SE30 to get a better insight
SE30
The ABAP Runtime Trace (SE30) - Quick and Easy
what is the total time, what are the Top 10 in the hitlist.
Siegfried -
Multiple relationship for the same field
Hello !
I have this situation :
Table : Article
Id
name
category
Table : Services
id
name
nr
value
Table : Sell_item
Id
item_id
quantity
price
value
Now the problem is this : The field Item_id on the sell_item table can be the id for an Article or a Service. So I need to create a double relationship for this field one with Article table an one with Service table.
Is this possible ?
If not , or if I'm wrong how can I solve this situation ?
Thank you.Hello,
Please try the following resource:
http://stackoverflow.com/questions/10253986/sql-foreign-key-issue-with-2-parent-tables
The resource offers you 3 options.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCMHi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM -
HT1338 how do you perform a clean install for imac
How to perform a clean install for imac, because I cannot upgrade to version 10.6?
Here are the technical requirements for Snow Leopard:
http://support.apple.com/kb/sp575
If your iMac meets the requirements, then you will have to purchase the Snow Leopard disk from apple:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
To reinstall your OS, insert the original OS disk that came with your iMac and start up the iMac holding the C key. Start the installation process and when you see the menu bar, select 'Utilities'. From the drop down menu, select Disk Utility. Erase the HDD and the continue the installation.
Note that this will erase all data on the HDD so have it backed up before you start.
Ciao. -
Hi everyone,
A somewhat similar question has been asked before by others but none of the answers given has helped me.I am attempting a DPM 2012 installation, which is failing at the "deploying reports" stage.My analysis of logs seems to point me in the direction of an SSL
error, which does not make sense since the configuration files say SSL is disabled (or at least, should be).
Here are the symptoms:
1.I am able to browse http://FQDN/Reports_MSDPM2012 folder from internet explorer
2.I am also able to browse http://FQDN/ReportServer_MSDPM2012 from internet explorer
3.The information given in the logs and relevant config files is shown below:
<<RSREPORTSERVER.CONFIG>>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSDPM2012</InstanceId>
<InstallationID>{d9b1c335-5842-4a81-9148-79184c38bf09}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>
<!-- <Add Key="ProcessTimeout" Value="150" /> -->
<!-- <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
<!-- <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
<!-- <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
<!-- <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions"
4.The DPM log file still appears to be using SSL even though i used reporting services configuration to remove SSL bindings:
running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException:
exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could
not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest,
Exception exception)
5:I do have an SCCM site on the default web site used by SMS clients but on different ports
I am stumped.Somebody please give some advice
Thank youHi
This is an old post but did you come right? -
How to identify when shd i go for lis nor for lo
hi all,
Can anyone explain me with a scenario to identify when shd we go for LIS extraction and we shd we opt for LO extraction.
thanxs
hariHi Hari,
Presently we are not using LIS, maximum we go for LO extraction only... when you no need V3 update , and you want to extract the entire module data ..(i mean not for a specific application wise.. )that time you can go for LIS.. but.. for updating the data definetly maximem we need only V3 update. so, always suggestable is LO extraction.. Previously we dont have Lo extraction.that time we go for LIS..
thansk
@jay -
Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
ThanksHi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu -
Can't establish trust relationship for VM hosted SSRS Service
We are developing an Azure application that requires SSRS for report generation. Currently we are using the Azure SSRS service, and that is working great. Unfortunately, Microsoft is discontinuing that service this fall. So we have two options -- use a VM
with SSRS or switch to some other reporting product. For testing the latter approach I have set up a vm with SSRS over SSL. I created a self-signed certificate on the vm (xxx.cloudapp.net) and set it up to allow access from any IP
for testing. I installed this cert on my dev box (computer account in both personal and trusted authority). I am able to access https://xxx.cloudapp.net/ReportServer and .../Reports
from my local browser. I can generate reports without problems.
However, after uploading the xxx.cloudapp.net certificate to my cloud service, I find that service is unable to access SSRS. I get the error: "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure
channel." I'm guessing that the vm knows it has the certificate, but doesn't trust the source authority. I can't find any way in the Cloud Service UI to change that.
So, summarizing, the SSRS can be accessed remotely via SSL if I install the cert on my local machine. But I can't get the cloud service to work when I do that. What do I need to do? I'm not crazy about setting up a production vm with a
non-cloudapp.net name and going to a certificate authority to get a certificate just to test. And I don't know if that would work any better.
Any advice will be greatly appreciated.
Thanks,
Terry
TerryLHi Jambor:
I have already installed the self-signed certificate in personal for the local machine, also in the trusted root certification authority section. I am using the instructions at
http://msdn.microsoft.com/en-us/library/dn449661.aspx in the section labeled "To use the Virtual Machines Self-signed Certificate". If I install the certificate on my local
machine in both the personal and the trusted authority section, I am able to deploy to SSRS via https. I can also browse to
https://xxx.cloudapp.net/Reports and generate reports. Therefore I think the VM and SSRS are OK.
I believe my problem comes when I try to call the SSRS service from a free-standing Azure cloud service unrelated to my vm. I can import the certificate to the cloud service, but there is no way in the UI to tell the cloud service to trust my xxxx.cloudapp.net
certificate authority. I imagine there is a vm sitting underneath, but I can't access it to add the certificate to make xxx.cloudapp.net a trusted CA. Consequently, when my cloud service tries to access the SSRS cloud service on the vm, I get the
error "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel."
The trusted CA idea is just my theory. When I use Azure's soon-to-be-discontinued SSRS service via https it works fine with no certificate.
There has to be a way to make this work, but I can't figure it out.
Thanks,
Terry
TerryL
Maybe you are looking for
-
Hello. I've got a MacBook Pro which my daughter turned off and on badly resulting in a grey screen. Followed instructions for that issue and have got to installing the disc utility DVD which came with the mac. Clicked on the hard drive and then 'fi
-
Exporting Into Excel from Crystal Reports 8.0.1.0
Post Author: Manoj CA Forum: Exporting Hi, I am using Seagate Crystal Reports 8.0.1.0 along with my VB application. System was exporting into Excel on Older Versionsof Windows like 98 and all. But in XP, after exporting if i open the exported file, e
-
I need to include a page with a name I do not know in advance. I can do this with <jsp:include page="${filename}"/>. Can I also do it somehow using tag files?
-
To capture/format the RAW DETERMINISTIC output variable
Hello Gurus, I am new to this forum but just have few questions: I have a procedure 'proc_encrypt_data'. This procedure accepts a varchar2 variable and returns a RAW deterministic variable as output. I have tried to typecast it or change the value to
-
Living in Belgium, not so far from the Netherlands where I work quite often, I decided to buy a Nokia Lumia 800 since it wasn't available yet in Belgium. Big mistake as I soon found out that I couldn't update my phone (unless I created a completely