IDoc adapters not in "communication channel monitoring"?

Hi,
I've modified some information that the receiver IDoc adapter is using (the logical system ID). But after I refreshed all the caches the change is not updated when I send an IDoc to R/3.
When this kind of problem happens with RFC adapter you just have to stop and restart the communication channel in communication channel monitoring. But IDoc adapter is not here... so, how can I restart the IDoc communication channel?

Hi,
IDoc adapter doesnt reside on Adapter Engine, its part of ABAP stack, because of this you cannt find it in RWB-Communication channel monitoring...
Try refreshing the cache:
Transaction: sxi_cache
CPACache refresh using the below url:
http://<server:port>/CPACache/refresh?mode = full
to get the changes affected.
Regards,
Sreenivas.

Similar Messages

  • Channels not monitorable in the Communication Channel Monitor / RWB

    Hi,
    Back on XI after a long break… &#9786;
    I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
        Status: NA
        Short Log: No adapter registered for this channel
    The adapter is deployed and the integration scenarios using it work perfectly:
      - sda package deployed through the SDM
      - the metadata defined in the Design
      - a valid and working configuration involving the scenario is defined
    The messages are going through and are monitorable in both SXMB_MONI and RWB...
    All other channels using system adapters (File, RFC, SOAP…) do display a status (as a color icon) and a Short Log… and they can be administered (start/stop) using the enabled buttons when selected…
    From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
    I have no idea what could be the issue… should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
    I saw 2 posts with this error message but they did not help me to figure out where the issue is …
    Thanks for your help,
    Adalbert
    Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

    Hi Gouri,
    Thanks for your response, I will try would suggestion for testing... but
    I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
    It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
    I did not see anything in the Adapter Development guides related to this kind of constraints...
    Thanks,
    Adalbert

  • Process not visible in the Communication Channel Monitor

    Hi there
    I have a scenario where I create multiple text files with my message mapping. First I created the scenario with a single file and tested it. It worked so then I changed the Interface Determination to Enhanced and the necessary occurrences to unbounded in my IM and MM. Now if I execute the scenario it shows a successful status in the SXMB_MONI but does not create the flat file. If I go to my Communication Channel Monitor it does not show it there so it did not reach it. Is there some other ting I needed to change for this multiple file scenario?
    Thanks,
    Jan

    Hi again
    I sorted out the issue but now I'm getting something weird. In my source Message Mapping I have:
    Destination
    --Name (0-Unbounded)
    Payload
    --Details (0-Unbounded)
    And my Target mapping I have
    Main_Structure (0-Unbounded)
    --FileDetails (0-1)
    So the Destination determines the number of files and the payload goes to the File Details.
    This does not work for some reason but if I change my mapping to a fixed number of files it works. For example: If I create a UDF that creates 2 arrays and map it to my Main_Structure it creates 2 files but it I map my Destination node with X amount of lines to my Main_Structure It shows fine in SXMB but does not show at all in the component monitor for the receiver CC and in my message monitor it shows "On Hold"

  • Communication Channel Monitoring not showing up Communication  Channels

    Hi All,
    PI 7.1 : I  have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
    And in ID I am getting below warning message for that Communication Channel.
    Message:  Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for  Adapter Engine is missing in SLD.
    Any idea? I appreciate your  quick help.
    Thanks,
    Carl

    Hi Abhishek,
    I have selected inID ,  File dapater software component  SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
    Thanks,
    Carl

  • Communication channel  monitoring did not record the processing detail

    Hi,
    I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel  monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
    Thanks in advanced!
    Meiying

    Hi
    Try opening directly
    tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
    http://<host>:<port>/mdt/channelmonitorservlet
    You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
    also refer
    No "Adapter monitoring" in runtime workbench

  • Not able to open Communication Channel Monitoring

    Hello All,
        I am not able to open communication Channel Monitoring in Runtime workbench under Component Monitoring. When i am click on Communication Channel Monitoring button following error was thrown. Can anybody suggest me, How to resolve this problem.
    java.lang.NullPointerException
         at com.sapportals.htmlb.table.TableView.getColumns(TableView.java:332)
         at com.sapportals.htmlb.table.TableView.getColumn(TableView.java:350)
         at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setTableSortingStuff(ChannelListTableView.java:556)
         at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setSingleSelectTable(ChannelListTableView.java:393)
         at jsp_channelmonitoring1213186378553._jspService(jsp_channelmonitoring1213186378553.java:257)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Thanks&Regards,
    VenkatK.

    Hi,
    The error could be because
    1) The URL referenced from RWB (Communictaion Channel) is incorrect.
            Try accesing the link directly http://HOST:JAVAPORT/mdt/channelmonitorservlet
    If you are able to open the window with out nay error, it means you url referenced from SLD is wrong. Correct your SLD and update the cache.
    2) If you are not able to access above URL, it means the java service is not running to accept your request, check in visual admin if any of the services are stopped. Try restarting the same.
    Regards,
    KNS Kumar

  • New channels in integration directory not displayed in communication channel monitoring

    Hi all,
    We configured recently new communication channels in the intgration directory (PI 7.0), and all changes were activated. But when we check in the communication channel monitoring, we cann't see them.
    Any idea please.
    Many thanks in advance

    Hi,
    Might be issue with cache.
    can you validate as per below thread?
    Communication channel not showing in CC monitoring
    Regards,
    muni.

  • Communication channel monitoring is not working

    hi all,
    in RWB when i click on COMMUNICATION channel monitoring it is throwing the error like 'request resource is not available'.
    how can i resolve this..
    regards,
    KRUSHI

    Hi
    Try opening directly
    tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
    http://<host>:<port>/mdt/channelmonitorservlet
    You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
    also refer
    No "Adapter monitoring" in runtime workbench

  • CC not visible in RWB-Communication channel monitoring

    Hi All,
    Communication channel created in the directory is not visible in
    Communication channel monitoring of RWB. I refresh ABAP cache, SXI_CACHE,
    CPA cache. Still its not visible. Deleted and created again. Still no use.
    None of the communication channels newly created are visible in RWB. Could anyone suggest some ideas to resolve this issue.
    Thanks
    Ricky

    Hi
    Just to be sure a basic question to start with : You do activate your channels in the ID after creation ?
    Dirk

  • Custom Adapter - No content in Communication channel Monitoring for JCA

    HI,
         We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
         Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
         We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
        Our client needs the entries in CC monitoring instead of Customised Audit Logs.
        Please help.
    REgards,
    Anurag Garg

    HI Satish,
                     Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                     This log  creates a trace  File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
                   Like- Message Successfully put into the queue.
                         -  Successfully processed.
                     Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
                   I think some extra code needs to be added to activate this in Monitoring.
                   Please suggest.
    REgards,
    Anurag Garg

  • XI communication channel missing in communication channel monitoring

    Hello partners,
    I have a problem with communication channel monitoring.
    I have defined a communication channel of Adapter Type = "XI" in the integration directory.
    I have also sent messages successfully via this communication channel.
    But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
    Can someone tell me how I can get monitoring info of an "XI" communication channel?

    Hi,
    From SP17, you have a new feature
    http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
    <i>The Runtime Workbench has the following new functions:
    &#9679; Component monitoring: Communication channel monitor
    In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
    Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
    To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
    Regards,
    Bhavesh

  • Advance selection for source file-Error in communication channel monitoring

    Hi all,
    Referring to the link below:
    <b>/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    I have developed my scenario in the same way.But due to the values <b><NOTHING></b>
    in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
    Plase note that  our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
    Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
    Thanks & Regards,
    Sudhir Tiwari

    Sudhir,
    In the sender file adapter, you have an option called <b>"Processing Sequence"</b>.
    By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
    In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
    Regards
    Bhavesh

  • Communication Channel Monitoring Error

    Hi...Experts,
    we r doing RFC-SOAP scenario with out using WSDL file,
    sender Communication Channel Monitoring getting error like this
    Error in processing caused by: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
    In the Receiver Communication Channel Monitoring, getting error like this.
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden.
    how can i rectify these errors, pls suggest me..
    regards,
    Pasi.

    Hello Pasi,
    Error: HTTP 403 Forbidden
    Description: The server understood the request, but is refusing to fulfill it
    Possible Tips:
    Path sap/xi/engine not active
    • HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
    • Because of Inactive Services in ICF –Go to SICF transaction and activate the services. Refer SAP Note -517484
    • Error in RWB/Message Monitoring- because of J2EE roles – Refer SAP Note -796726
    • Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. –Because of the URL is incorrect or the adapter is not correctly deployed.
    Go through Micheal's Blog..
    XI: Timeouts
    /people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
    Thanks,
    Satya Kumar

  • File to Proxy Scenario : Error in communication channel monitoring

    Hi,
    I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
    u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
    File will be picked from the FTP server.
    I have created File system in SLD of type "Third Party", Can this be the issue?
    Please guide me on this.
    Thanks,
    Chandravadan

    Hi!
    Check if the tcode SLDCHECK is ok!
    Check note #764176.
    Also, refer to link below and execute each steps from the links there MANUALLY.
    Wizard-Based Configuration:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
    Regards,
    Caio Cagnani

  • Page cannot be displayed error in Communication channel monitoring

    Hi,
    when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
    I am testing this for the for the first time in QA environment.
    But in development , CC monitoring works fine in the same Laptop.
    I have checked the hosts file and it has the IP address and system name present in it.
    i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
    we are using PI 7.0, windows XP and IE 7.0.
    Could anyone help to solve this problem?
    Thanks
    JJ

    I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
    This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
    instead of the FQDN you can also open the page using the IP address of the server.
    I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
    This may be because you did not mark the thread as a question
    Regards,
    Abhishek.

Maybe you are looking for

  • ABT1N-Getting Error while doing Intercompany asset transfer

    Hi, Due to a merger of two comapny codes, my clients needed to make an intercompany asset transfer (transaction code ABT1N), with company code 099 as the sending company code and 200 as the receiving company code). However they got the following erro

  • Computer back up failed... how do I get my tunes from iPod to computer?

    STUPID BEST BUY.... what a TERRIBLE place. Long story short, my computer died thanks to these idiots and they replaced the motherboard. After ASSURING me they would NOT re-format the hard drive, they did anyway. I did do a back up before sending the

  • Low quality music from OVI music store.

    My nokia X6 was replaced today. And in my replaced phone i signed in with my OVI unlimited account, the subscription got extended for 7 months and i found that all the songs which i download from my phone were of 64kbps whereas i download from my com

  • Problem Outbound IDOC from R/3 to XI

    Hi, I am working on to send an IDOC from SAP ECC6 to XI. I configured all necessary things as follows: 1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port. 2. created for

  • Business Package for Assets 50.3.1:  Error in Source. Message not available

    Hi Just deployed the Business Package for Assets 50.3.1 on Portal version 7 with SP8, when running the Assets detail, my assets iviews always display:  "Error in Source. Message not available." even all other iviews on the same page still work as exp