Idoc Error 51 with value ?

Hi ,
As per our requirement we have created a couple of matrials in A R/3 system and it sending to another B R/3 system,after creating materials we ran the BD10 for idoc processing in A system ..and we check in to another B system for materials some materials are transfered ..but 3 of them not...we checked in we02 and see status is 51..and we check display logs for it..it showing error message is "The value R444 is not allowed for the field MVKE-DWERK'...
"Material not in sales org. 0280 distrib. channel 10" this is the error ..could any body help o nthis how to i find above field MVKE-DWERK in my A&B system and help to reslove it ASAP..
Thanks In Advace ..
Regards,
Vasu....

Hi,
While distributing the data from one system to another system the dependent objects must be created or available on the target system. In your case the delivering plant is not available on system B. SAP does not create dependent objects. They have to created or migrated separately.
Cheers
VJ

Similar Messages

IDOC Error with STATUS 51

HI,
I has a JMS-XI-IDOC Scenario where i has used BPM to get the response from RFC wehre the RFC input is the message from JMS.
The Response Message from RFC is mapped to IDOC .The Scenario is working and the IDOC is getting created in SAP System Iam getting the Error with Status = 51 and the required field LIFNR not found.
Request you to please provide the suggestion whether i need to make any settings to resolve this.
Thanks & Regards,
Y.Raj.

Hi !
Status 51 in most cases is because of lock occured in R3, you can check the kind of error in BD87. If it is a lock error then you can directly say process all
also check in the last page of this URL
http://help.sap.com/saphelp_nw04/helpdata/en/d4/0d67e4d85511d2a6080060087832f8/frameset.htm
Thanks
Edited by: Abhishek Agrahari on Sep 22, 2008 9:54 AM

Error with Value Help

We Have Installed Netweaver Portal 7.0 and this is connected to CRM 5.0
We had a requirement where we had to Connect this Portal to two different Clients of the same CRM system. For this we made a copy of Business Packages Folder under Content Provided by SAP>Specialist>CRM.In the Copied folder we then replaced the value 'SAP_CRM' with the System Name i gave for new Client using Multi Proprety Replacement.Everything is working fine now except the value Help.
When I login using the User Id mapped with the CRM user in 2nd Client(Which uses Copied BP) and when i press the Value help icon it throws a run time error:
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.core.defaultservices/com.sap.pct.crm.core.valuehelp).
Exception id: 02:31_11/09/06_0109_16423550
See the details for the exception ID in the log file
i've assigned the Copied Default CRM services ROle for this Id and even then it does not work.
But when i login using the Portal ID which is mapped to CRM user in 1st Client(Which uses original BP) Value help is working fine.
Has anyone faced similar issue previously.
Do i need to anything other than Multi Proprety Replacement for this Case.
Can someone help me out on this.
Thanks and regards,
Vijaya Sai.V

Hi Vijaya,
we have also the same requirements.
Have you found now a solution for this problem?
Thanks in advance.
Darwish

Inbound IDoc error with status 51 : No unique SA could be determined

Hello,
when I would like to create AAU by EDI info;
ORDERS05, DELORD type
how can I set mandatory item for AAU?
Please help
Edited by: Hiroko Numano on Apr 9, 2008 7:13 AM

Hi,
Vendor 100002 is not maintained in your system. Maintain the same or use some other vendor which is there in your system.
You should be able to post the document.
Regards,
Lalit Kabra

Idoc error- Balance in transaction currency

Dear Experts,
In we02, I found idoc error with the following messages:
Balance in transaction currency
Message no. F5 702
Diagnosis
A balance has occurred in transaction currency 'XXX' with the following details:
Exchange rate '00', amount ' 1.413.696' and currency key 'XXX'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please advice, how to correct this problem.
Thank you in advance.

Hi Natasha,
Please check the "EDID4" table to find the error why it is not allowing to post.
Also check "WE09" to check the status of the IDOC.
You can process it manually through "BD87"
Bye
Swapna murali

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

Large XML Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2 (ATG.H RUP 5), and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

Thanks for the link. It looks like the sysadmins have throttled cups to low to allow large bitmapped print jobs:
grep MaxRequestSize cupsd.conf
# MaxRequestSize: controls the maximum size of HTTP requests and print files.
MaxRequestSize 10M
I am trying to get a more reasonable size limit.

Large BI Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

The linux sysadmins set the cups max_request_size at 10 MB, which was causing this error. Once the restriction was lifted, the reports ran without error.

Payment requests created from In-House Cash - error with PAYEXT IDOC

Hello -
I am getting getting a '51' error with my inboud PAYEXT IDOC and the payment request cannot be created and the IDOC error is : Error creating the payment requests - no valid payment method available.
I have checked the Route process config in IHC and it looks good (or I think so). I then checked the IHC config: Set Up of payment request for inbound IDOC in FI and am wondering about the Processing Parameters set up. In this config, I see 2 payment methods field (Payment Method for This Payment) and (List of the Payment Methods to be Considered).   Can somebody tell me what's the difference between these two fields and since my payment method is not in the List of PM to be considered, could that be causing my erorr?
Any guidance would greatly be appreciated.
Thanks
Becky

Hi Odaiah
I am in ECC 5.0 and when I view IMG activity IHC_VC_INB_CUST, there's a field called:
Payment Method for This Payment(Payment method used to settle open items)
and another field called List of the Payment Methods to be Considered.
The invoice was paid via payment method 'W' and in our system, we are using IHC to make payments on behalf. So after running F110 for payment method 'W', the IDOC gets created and sent to IHC to process. IHC will then create the payment request (IDOC PAYEXT) which will then get process by F111. Since the IDOC is failing, the payment request is not getting created.   You mentioned to get an ABAPer to throw in debug, I would love to but does not know the program that this process is running through. I tried putting it in debug from WE02 (IDOC processing) but with no success.
Becky

Shared Variable Initial value not licenced error with cRIO

Hello Everyone,
I've a project that will be deploed on cRIO. This project was created on a different machine and didn't have any error regarding the shared variables. when I transfered the project to the computer connected to the cRIO, I have this error with all shared variable. The error message says that:
1. Initial Values: Not Licenced or can't be edited outside of LabVIEW.
2. Logging: Not Licenced or can't be edited outside of LabVIEW.
attached are two images for the error i have.
Can I have help with this issue?
Thanks in advance
Attachments:
1.png ‏134 KB
2.png ‏142 KB

Good day,
Sounds like you are using the DSC module features on your code and you forgot to activate the runtime system on that machine. If you have access to the NI License Manager, please check the status of the license.
We need an active license for the second message but, for the first one you can try to program your own initial values for all of your network-published shared variables by initializing whenever the PC is started. During the initialization portion of your code, you can just write a constant value to the shared variables so the values are the same initial values every time it is run.
Regards,
Alejandro | Academic Program Engineer | National Instruments

Error with decimal value using DG4MSQL

Hello,
when i make an update on a numeric column [numeric(38,15)] of a database table residing on a MS-SQL-Server 2005 it works fine when the value has no decimal part:
declare
v_test1 number := 1;
begin
update CUSTOMER@DBL_MSSQL4 set "freenumber1" = v_test1;
commit;
end;
/But if i use a value with a decimal part it gets an error
declare
v_test1 number := 1.2;
begin
update CUSTOMER@DBL_MSSQL4 set "freenumber1" = v_test1;
commit;
end;
/Error message:
ORA-28500: Verbindung von ORACLE zu Fremdsystem gab diese Nachricht zurück:
[Oracle][ODBC SQL Server Driver]Ungültiger Zeichenwert für Konvertierungsangabe
ORA-02063: vorherige 2 lines von DBL_MSSQL4
ORA-06512: in Zeile 7And here is the trace:
Oracle Corporation --- MONTAG     MRZ 08 2010 15:20:14.940
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONTAG     MRZ 08 2010 15:20:14.940
    Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "RECOVER" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "DG4MSQL"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.1.0.6.0_0006, Instance:DG4MSQL
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2010/03/08-15:20:14
RC=-1 from HOSGIP for "PATH"
PATH from environment is "D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Programme\IBM\Informix\Client-SDK\bin;C:\Programme\Microsoft SQL Server\90\Tools\binn\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0"
Exiting hgolofn, rc=0 at 2010/03/08-15:20:14
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2010/03/08-15:20:14
Entered hgolgon at 2010/03/08-15:20:14
reco:0, name:testuju, tflag:0
Entered hgosuec at 2010/03/08-15:20:14
uencoding=UTF16
Entered shgosuec at 2010/03/08-15:20:14
Exiting shgosuec, rc=0 at 2010/03/08-15:20:14
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2010/03/08-15:20:14
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using testuju as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2010/03/08-15:20:14
HS_FDS_CONNECT_INFO = "OBELIXUS//testuju"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2010/03/08-15:20:14
dsn:OBELIXUS//testuju, name:testuju
optn:
Entered shgogohn at 2010/03/08-15:20:14
ohn is 'OraGtw11g_home1'
Exiting shgogohn, rc=0 at 2010/03/08-15:20:14
Entered hgocont_OracleCsidToIANA at 2010/03/08-15:20:14
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2010/03/08-15:20:15
##>Connect Parameters (len=211)<##
## DRIVER=Oracle 11g dg4msql-OraGtw11g_home1;
## SERVER=OBELIXUS;
## Database=testuju;
#! UID=testuju;
#! PWD=*
## AnsiNPW=Yes;
## QuotedId=Yes;
## IANAAppCodePage=2252;
## ArraySize=100;
## PadVarbinary=0;
## SupportNumericPrecisionGreaterThan38=1;
Exiting hgogenconstr, rc=0 at 2010/03/08-15:20:15
DriverName:HGmsss22.dll, DriverVer:05.20.0053 (b0041, u0024)
DBMS Name:Microsoft SQL Server, DBMS Version:09.00.3068
Exiting hgocont, rc=0 at 2010/03/08-15:20:15
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2010/03/08-15:20:15
Entered hgoulcp at 2010/03/08-15:20:15
Entered hgowlst at 2010/03/08-15:20:15
Exiting hgowlst, rc=1 at 2010/03/08-15:20:15
SQLGetInfo returns Y for SQL_PROCEDURES
Exiting hgoulcp, rc=0 at 2010/03/08-15:20:15
Entered hgouldt at 2010/03/08-15:20:15
Exiting hgouldt, rc=0 at 2010/03/08-15:20:15
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber1
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber2
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber3
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber4
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber5
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber6
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber7
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber8
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber9
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber10
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber11
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber12
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber13
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber14
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber15
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber16
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber17
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber18
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber19
3 DECIMAL       Y         41         41 38/ 15    0   0   0 freenumber20
91 DATE          Y         16         16   0/ 0    0   0   0 freedate1
91 DATE          Y         16         16   0/ 0    0   0   0 freedate2
91 DATE          Y         16         16   0/ 0    0   0   0 freedate3
91 DATE          Y         16         16   0/ 0    0   0   0 freedate4
91 DATE          Y         16         16   0/ 0    0   0   0 freedate5
91 DATE          Y         16         16   0/ 0    0   0   0 freedate6
91 DATE          Y         16         16   0/ 0    0   0   0 freedate7
91 DATE          Y         16         16   0/ 0    0   0   0 freedate8
91 DATE          Y         16         16   0/ 0    0   0   0 freedate9
91 DATE          Y         16         16   0/ 0    0   0   0 freedate10
91 DATE          Y         16         16   0/ 0    0   0   0 freedate11
91 DATE          Y         16         16   0/ 0    0   0   0 freedate12
91 DATE          Y         16         16   0/ 0    0   0   0 freedate13
91 DATE          Y         16         16   0/ 0    0   0   0 freedate14
91 DATE          Y         16         16   0/ 0    0   0   0 freedate15
91 DATE          Y         16         16   0/ 0    0   0   0 freedate16
91 DATE          Y         16         16   0/ 0    0   0   0 freedate17
91 DATE          Y         16         16   0/ 0    0   0   0 freedate18
91 DATE          Y         16         16   0/ 0    0   0   0 freedate19
91 DATE          Y         16         16   0/ 0    0   0   0 freedate20
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean1
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean2
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean3
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean4
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean5
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean6
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean7
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean8
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean9
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean10
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean11
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean12
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean13
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean14
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean15
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean16
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean17
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean18
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean19
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean20
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean21
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean22
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean23
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean24
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean25
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean26
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean27
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean28
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean29
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean30
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean31
3 DECIMAL       Y          3          3   1/ 0    0   0   0 freeboolean32
12 VARCHAR       Y         50         50   0/ 0    0   0   0 custtypekey
-4 LONGVARBINARY Y          0          0   0/ 0    0   0 20 logo
3 DECIMAL       Y          3          3   1/ 0    0   0   0 Active
91 DATE          N         16         16   0/ 0    0   0   0 CreateDate
12 VARCHAR       Y         50         50   0/ 0    0   0   0 CreateUser
91 DATE          N         16         16   0/ 0    0   0   0 UpdateDate
12 VARCHAR       Y         50         50   0/ 0    0   0   0 UpdateUser
12 VARCHAR       Y         50         50   0/ 0    0   0   0 Status
12 VARCHAR       Y         50         50   0/ 0    0   0   0 WFInstanceId
12 VARCHAR       Y         50         50   0/ 0    0   0   0 RightPk
3 DECIMAL       Y         12         12 10/ 0    0   0   0 ClientNo
3 DECIMAL       Y          3          3   1/ 0    0   0   0 MassData
3 DECIMAL       Y          3          3   1/ 0    0   0   0 OfflineData
12 VARCHAR       Y         50         50   0/ 0    0   0   0 PersonPk
Exiting hgodscr, rc=0 at 2010/03/08-15:20:16
Entered hgotcis at 2010/03/08-15:20:16
Calling SQLStatistics for CUSTOMER
Calling SQLColumns for testuju.CUSTOMER
Exiting hgotcis, rc=0 at 2010/03/08-15:20:16
Entered hgoclse, cursor id 1 at 2010/03/08-15:20:16
Exiting hgoclse, rc=0 at 2010/03/08-15:20:16
Entered hgodafr, cursor id 1 at 2010/03/08-15:20:16
Exiting hgodafr, rc=0 at 2010/03/08-15:20:16
Entered hgopars, cursor id 1 at 2010/03/08-15:20:16
type:0
SQL text from hgopars, id=1, len=39 ...
     00: 41445055 22204554 54535543 52454D4F [UPDATE "CUSTOMER]
     10: 45532022 66222054 6E656572 65626D75 [" SET "freenumbe]
     20: 20223172 3D203F                      [r1" = ?]
Exiting hgopars, rc=0 at 2010/03/08-15:20:16
Entered hgoexec, cursor id 1 at 2010/03/08-15:20:16
octype=2
hgoexec, line 91: Printing hoada @ 02175BCC
MAX:1, ACTUAL:1, BRC:1, WHT=3
DTY         NULL-OK LEN MAXBUFLEN   PR/SC CST IND MOD NAME
3 DECIMAL N         65          0   0/ 0    0   0   0 ?
Entered hgoprbv at 2010/03/08-15:20:16
hgoprbv, line 119: Printing hoada @ 02175BCC
MAX:1, ACTUAL:1, BRC:1, WHT=3
DTY         NULL-OK LEN MAXBUFLEN   PR/SC CST IND MOD NAME
3 DECIMAL N         65          0   0/ 0    0   0   0 ?
Exiting hgoprbv, rc=0 at 2010/03/08-15:20:16
Entered hgopoer at 2010/03/08-15:20:16
hgopoer, line 159: got native error 0 and sqlstate 22018; message follows...
[Oracle][ODBC SQL Server Driver]Ungültiger Zeichenwert für Konvertierungsangabe
Exiting hgopoer, rc=0 at 2010/03/08-15:20:16
hgoexec, line 216: calling SQLExecute got sqlstate 22018
nrows:0
Exiting hgoexec, rc=28500 at 2010/03/08-15:20:16 with error ptr FILE:hgoexec.c LINE:216 ID:Executing SQL stmt
Entered hgocomm at 2010/03/08-15:24:22
keepinfo:0, tflag:1
   00: 44555248 45522E42 53455247 44522E53 [HRUDB.REGRESS.RD]
   10: 2E534D42 2E564544 4F2E5355 4C434152 [BMS.DEV.US.ORACL]
   20: 4F432E45 65312E4D 33366465 322E6631 [E.COM.1eed631f.2]
   30: 2E34332E 38363832 31                 [.34.28681]
                 tbid (len 10) is ...
   0: 00220002 00007009 0104               [.."..p....]
cmt(0):
Entered hgocpctx at 2010/03/08-15:24:22
Exiting hgocpctx, rc=0 at 2010/03/08-15:24:22
Exiting hgocomm, rc=0 at 2010/03/08-15:24:22
Entered hgolgof at 2010/03/08-15:24:22
tflag:1
Exiting hgolgof, rc=0 at 2010/03/08-15:24:22
Entered hgoexit at 2010/03/08-15:24:22
Exiting hgoexit, rc=0 at 2010/03/08-15:24:22The init file for the DG4MSQL look like this:
HS_FDS_CONNECT_INFO=OBELIXUS//testuju
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVERAny ideas what i have to change to be able to update numeric columns with values containing a deciomal part using DG4MSQL?
Many thanks in advance for any help.
Regards Hartmut

Hello Mike,
here the results of the given select statements:
select * from NLS_DATABASE_PARAMETERS;
NLS_LANGUAGE          AMERICAN
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_TERRITORY          AMERICA
NLS_CURRENCY          $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     WE8MSWIN1252
NLS_CALENDAR          GREGORIAN
NLS_DATE_FORMAT          DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT          BINARY
NLS_TIME_FORMAT          HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_COMP          BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_RDBMS_VERSION     10.2.0.4.0select * from NLS_INSTANCE_PARAMETERS ;
NLS_LANGUAGE          GERMAN
NLS_TERRITORY          GERMANY
NLS_SORT
NLS_DATE_LANGUAGE
NLS_DATE_FORMAT
NLS_CURRENCY
NLS_NUMERIC_CHARACTERS
NLS_ISO_CURRENCY
NLS_CALENDAR
NLS_TIME_FORMAT
NLS_TIMESTAMP_FORMAT
NLS_TIME_TZ_FORMAT
NLS_TIMESTAMP_TZ_FORMAT
NLS_DUAL_CURRENCY
NLS_COMP
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSEselect * from NLS_SESSION_PARAMETERS ;
NLS_LANGUAGE          GERMAN
NLS_TERRITORY          GERMANY
NLS_CURRENCY          €
NLS_ISO_CURRENCY     GERMANY
NLS_NUMERIC_CHARACTERS     ,.
NLS_CALENDAR          GREGORIAN
NLS_DATE_FORMAT          MM/DD/YYYY HH24:MI:SS
NLS_DATE_LANGUAGE     GERMAN
NLS_SORT          GERMAN
NLS_TIME_FORMAT          HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT     DD.MM.RR HH24:MI:SSXFF
NLS_TIME_TZ_FORMAT     HH24:MI:SSXFF TZR
NLS_TIMESTAMP_TZ_FORMAT     DD.MM.RR HH24:MI:SSXFF TZR
NLS_DUAL_CURRENCY     €
NLS_COMP          BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSEThat was easy, but how and where to read the settings of the MS-SQL-Server?
All i can find is
Sprache               Deutsch (Deutschland)
Standardsprache          EnglischI have defined one more parameter in the ini<...>.ora file:
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252and now it works!
(With "HS_LANGUAGE=GERMAN_GERMANY.WE8MSWIN1252" is gives the same old error.)
Many thanks for your help!
Reagrds Hartmut

IDOC segment fields prefixing blank space with values

Hi Experts,
I am sending data through custom IDOC from SAP to XML which generates successfully but getting 2 problems in the data.
its having 3 level idoc segments:
SEGMENT1 with 1 field (field_name(20))
SEGMENT2 with 3 fields, (code_g(20), field_name(20), value(20))
SEGMENT3 with 4 fields, (code(20), field_name(20), Language(2) & text(20))
When i check the idoc in WE02,
1. i found that segment2-value field is prefixing some space along with the values.
    Eg: if the output is "0111" whihc is plant, in the output (WE02) it is giving "       0111"
2. Segment3-language is no where in the output and text which should come as "011" is coming like "       EN011" means it is concatinating language field value and displaying it with the text field value with prefixing space.
This is happening in PRD not in QA & DEV. I also checked the transport req and everything, Its same everywhere.
Can anyone please help me on this.
Regards,
Nik

Hi,
This issue happnes when u are moving the data to iDOC segement with offset.
to aviod this improper move instead of using offset statement use below mentioned code.
decalare a structure as
Data SEG1 type SEGMENT1 ,
        SEG2 type SEGMENT2,
       SEG3 type SEGMENT3.
then while moving
SEG2-code_g = 'XXXX'
SEG2-field_name = 'YYYY'
SEG3-value = 'ZZZZ'
here u are moving the segment values to idoc data (SDATA) and then append it.
move seg3 to idoc-sdata.
then append it to idoc.
hope this helps

File to IDoc scenario - IDoc received with Errors

Hi,
I tried to send send IDoc from a file to SAP R\3. The communication channels are working fine, and I get the IDocs in R\3 but with status 56. When I examine the received IDoc structure in transaction "WE19", I see that the receiver port(SAP + SID of sap server) is blank with no values. I tested the IDoc adding the receiver port, and the IDoc got successfully posted...
I wonder why the receiver port that I specified in payload file content, does not reflect during runtime. I'm using the downloaded MATMAS IDoc structure with sender and receiver details as the input from file....
Please help me out!
Thanks!!
-Ajitha

Rodrigo/Sarvesh/Ravi/Haseeb,
Thanks for the inputs!! I have checked in IDX1 and the port name is the same. Also "Apply control records values from payload" checkbox is selected. I guess there was some problem with cache. It started working fine, when I started a new session
Thanks for your time and inputs!!!

Idoc distribution with status of error records.

Hi Gurus,
my business requirement is i want to creat the Outbound Interface to distribute the data from sapserver to ESB server using the one userdefined function module, in this custom function module i written the logic to validate the input data if validation is file those error records are updated to one return table parameter and using the FM Master_Idoc_distribute for create and distribute the sucessfull records. till its working fine (with status 30-ready to dispach, 01- idoc creatd is in we05 and i have done the all configaration of message type creation, idoc type creation, port, partnerfrofil) ,
but my requirement is , for example if in 10 records even one record is also error records then no need to distribute the idoc data to sending system, just i want to send the idoc number with status error with error message.
plese suggest me the appropriate procedure.
Thanks & Regards,
Sai Ram.

Hi,
in ur code ur filling the idoc data rcord, control record ryt ..before u append data to idoc data , u r also validating and u might be doing in loop for appening the idoc data.
if there is any error in idoc then it won't distribute the data, it will be in error status only..u can only see the data in WE02. Then u can also change the data in WE02 and redistirbute it via BD87.
if u have any conerns let me know
Regards,
Nagaraj

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Error while populating drop down list with values from a database

Hi all,
I have a JSP page with a drop down list that is to be populated with values from a database.
This is the code in my JSP file:
     
         
         <% ArrayList<Integer> floornumbers = dataManager.getAllFloorNumbers();
            Iterator<Integer> iterator = floornumbers.iterator(); %>
         
         <form id="floorselectionform">
              <input type="hidden" name="action" value="floorselected"/> 
              Select floor | <select name="floorselector" id="floorselector">
                   <% while (iterator.hasNext()) { %>
                   <option value="<%=iterator.next().intValue()%>"> <%=iterator.next().intValue()%> </option>
                   <% } %>
              </select>
              <input type="submit" value="Go!"/>
         </form>   The DataManager.java class simply forwards this to its respective Peer class, which has the code shown below:
      package seatplanner.model;
    import java.sql.Connection;
    import java.sql.ResultSet;
    import java.sql.SQLException;
    import java.sql.Statement;
    import java.util.ArrayList;
    /* This class handles all floor operations */
     public class FloorPeer
     /* This method returns all the floor numbers */
     public static ArrayList<Integer> getAllFloorNumbers(DataManager dataManager) {
        ArrayList<Integer> floornumbers = new ArrayList<Integer>();
        Connection connection = dataManager.getConnection();
        if (connection != null) {
          try {
            Statement s = connection.createStatement();
            String sql = "select ID from floor order by ID asc";
            try {
              ResultSet rs = s.executeQuery(sql);
              try {
                while (rs.next()) {
                  floornumbers.add(rs.getInt(1));
              finally { rs.close(); }
            finally {s.close(); }
          catch (SQLException e) {
            System.out.println("Could not get floor numbers: " + e.getMessage());
          finally {
            dataManager.putConnection(connection);
        return floornumbers;
     } The classes compile properly, but when I load this page up in Tomcat it just freezes and does not load the form. I tested the DB connection and it works fine.
What am I doing wrong in the JSP code?
Thanks for the help in advance.
UPDATE: I commented out the form, and added <%=floornumbers.size()%> right above the commented code to check if the ArrayList is indeed getting populated with the values from the database (the values are of type integer in the database). The page still freezes like before. I'm puzzled now :confused: .

Wrong usage of Iterator.

         
         <% ArrayList<Integer> floornumbers = dataManager.getAllFloorNumbers();
            Iterator<Integer> iterator = floornumbers.iterator(); %>
         
         <form id="floorselectionform">
              <input type="hidden" name="action" value="floorselected"/> 
              Select floor | <select name="floorselector" id="floorselector">
                   <% while (iterator.hasNext()) {
                                Integer inte = iterator.next();
                        %>
                   <option value="<%=inte.intValue()%>"><%=inte.intValue()%></option>
                   <% } %>
              </select>
              <input type="submit" value="Go!"/>
         </form>or make use of enhanced loop as you are already using J2SE 5.0+ for avoiding confusions.

         
         <% ArrayList<Integer> floornumbers = dataManager.getAllFloorNumbers(); %>
         
         <form id="floorselectionform">
              <input type="hidden" name="action" value="floorselected"/> 
              Select floor | <select name="floorselector" id="floorselector">
                   <% for(Integer inte:floornumbers) {%>
                   <option value="<%=inte.intValue()%>"><%=inte.intValue()%></option>
                   <%}%>
              </select>
              <input type="submit" value="Go!"/>
         </form>and a lot better thing would be making usage of basic Taglib provided with JSTL spec or struts spec which make life easier and simple.
something like usage of <c:forEach/> or <logic:iterate/> would be lot better without writing a single scriptlet code.
Hope that might help :)
REGARDS,
RaHuL

Idoc Error 51 with value ?

Similar Messages

Maybe you are looking for