Idoc Error Message 51 is shown in sw37 but not in idoc Testing

Hi Experts,
I have one problem with Idoc processing, below is the scenario.
The Idoc IDDEK12K is posting from SAP XI with NFS file path details. The Idoc should fail if the file is not formatted properly like if it is missing the trailer record. This is happening in the IDDEK22K,
It appears that all files are processing successfully when expected. However, when I do a negative test (where I expect it to fail), SM37 shows that it failed yet the IDoc is still successful. I expect to see the trigger IDoc as failed, and the WEINBQUEUE should include an entry for IDDEK12K.
can any body tell me what could be the problem. do i need to change the code in FM, but that FM is used by the IDDEK22K and IDOC IDDEK22K is working fine for both + and - test.
Any help is appreciated and rewarded.
regards.

HI Jegathees,
First check in R/3 system it is delivered scucessfully or not in WE02 Tr. Code.
If it is not reached the PI then goto tr code SM58 find is there any error information.
And also check the SMQ1 and SMQ2 , may be it will stucked in this.
Check the RFC destination, Port and Partner profile before sending the Idoc to the PI system.
Regards
Goli Sridhar

Similar Messages

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats)?

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats
Happens isnce a week or four...

https://www.dropbox.com/s/h20hiaxiuynz6z5/Blendle%20week%2051%202014.pdf?dl=0
https://www.dropbox.com/s/eohk8an2rozwe5w/NatGeo2015.pdf?dl=0
Until a few weeks ago no problems with this kind of files

Idoc with error message when coming from middleware but not in we19

Hi Experts
I am facing a very strange issue !
I have a Z - Idoc type and corresponding inbound function module for creating schedule lines i.e. doing something what me38 does.
When my middleware i.e. Mercator Websphere is sending the idocs, they fail with the error message in the status record as
Field EKET-MENGE (19) does not exist in the screen SAPMM06E 1117.
But when I try processing the same idoc using we19, the scheduling lines are created and the schedule agreement is changed.
Is there any difference between we19 and when idocs come from the middleware ?
Points would be rewareded if useful answers received.
Regards
Shubhankar

Well i think that the problem is with your BDC. there is an option to use standard size in BDC. I think your table control falls short of 19 rows in your program. Please see the thread below and incorporate the same changes in your BDC. I think u might need to record the BDC again.
Re: BDC tabel control for QE01
DATA OPT TYPE CTU_PARAMS.
OPT-DEFSIZE = 'X'.
CALL TRANSACTION 'FB01' USING ITAB OPTIONS FROM OPT.

OSA-Error message shows up in R3, but not in Portal(BSP)

Hello,
I'm working on Objective Setting & Appraisal with workflow & portal. At the template level I've put some business check which if not met at the document level throws up error msg. This works fine in R3 and the error msg is shown at the bottom of the screen at the status bar.
But this same error msg doesn't show up when I open the document in the portal through workflow. The appraisal document opens in the portal through BSPs. When the condition is not met, on saving or submitting the page remains there ... but no error msg. We tried to show the error msg as a pop up and the pop up works fine in R3 but not in portal.
Pls advice how to solve this problem.
JKT

Hi Sameer,
We have used the application hap_document under BSP Application. And we have not used any standard user exit. All we have done is created a new enhancement under HRHAP00_DOC_BC ;ie; Appraisal Document - Business Check.
I can see one document_error.htm Document - Error Handling. Do I have to do anything with this page ? if so, should it not call this page automatically whenever there is an rror msg ?
Pls suggest. Thanks

When I try to use the Vision Acquisition vi, I get an error message saying that " The system did not receive a test packet from the camera."

Error -1074360271 occurred at IMAQdx Start Acquisition.vi
NI-IMAQdx: (Hex 0xBFF69031) The system did not receive a test packet from the camera. The packet size may be too large for the network configuration or a firewall may be enabled.

Bruce Ammons wrote:
Did you try disabling test packets? I know Basler cameras have a "Enable Test Packets" setting buried in Advanced Network settings or something like that. You have to change the setting in MAX to show all settings instead of just acquisition, then locate the setting. I have been told regularly that the setting must be turned off for Basler cameras to work properly. Perhaps your camera has the same setting and the same requirement.
Bruce
A very specific firmware revision for certain Basler cameras had an issue where the test packet would not be sent for certain packet sizes and certain specific conditions, causing a false report of a test packet failure when a normal acquisition would in fact succeed. However, this was fixed in later firmware revisions and I have never seen a similar issue on any other types of cameras.
Aside from this specific case, if a test packet fails, it generally means an acquisition will as well. Given that Pleora's software can acquire, we can rule out networking topology and hardware, assuming you are using the same packet size as the Pleora software is. The only other thing that would seem a likely candidate would be a software issue like a firewall or some other filter driver that is interefering with IMAQdx receiving the data.
Eric

I frequently find that when closing Firefox, and try to reopen again, get error message "Firefox is already running, but not responding. Recommend to close it, or restart system". Using Windows Task Manager, no application is found. After restart, OK.

At the update to Firefox 3.6.8, I also updated to Flash 10.

I get this problem often, on my computer which runs XP, I find simply waiting a few moments (up to a minute) is enough to end the process.
On my Vista machine, it sometimes works that way, but if FF locked up (stopped) and is ended through the task manager, it often requires a reboot or a much longer wait (up to 10 minutes or more).

"Close Firefox - Error Message -. Firefox already running, but not responding -.." A real pain - Firefox worked much better before all the updates!! How do I fix this?

This pop-up appears anytime I attempt to close Firefox and immediately open another browser, etc.
Suspect it is add-ons related. Never had the problem with "older" version of Firefox.
It is a real nuisance, almost makes me go to Explorer!

Try to wait a bit longer (up to 1 minute or maybe more) as it can take some time for Firefox to close completely.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?

The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!

Bound error message always shown twice?

In my project every input field is bound to its own message-component.
But if I start the project and the validator finds an error, all the error-messages are shown twice and I have no idea why! I checked the error-messages in the beans, there is everything ok.
Does anybody know how to solve the problem?
Thanks!

thanks for the feedback.
@ Darryl.Burke
Your suggestion sounds quite good, but I can not imagine how this could work.
You wrote:
call requestFocusInWindow on the next component in the traversal cycleTo clearify my needs: I want to ensure for e.g. the JTextfield "dateTxt" a verification (starting my methode checkDate()) for the following cases:
- verify the user-input after leaving the JTextfield via "pressing the TAB-key" (in other words loosing the focus) or
- start a verification after "pressing ENTER-key".
I?m not sure, wether these needs are practical with your suggestion...Do you have any code example of your solution? So I can better understand your idea...

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

For the 1st time I am trying to send an iPhoto by email but get an error message "combinations of username and password not recognised" I use the same details to log on to my Sky Mail (yahoo mail ) account . Any ideas?

For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Help with error message: Expected end of line but got identifier

The following is a calculated applescript step in a Filemaker script. It tells iCal to go to the date of an iCal event that the script has previously created from Filemaker. The code below keeps generating an error message: "Expected end of line but got identifier." Note: "ACTIVITY::Date" below is Filemaker's way of indicating the file name (ACTIVITY) and the field in question (date). Help appreciated.
"tell application \" iCal\" ¶
activate ¶
switch view to month view ¶
set theDate to date \"" & ACTIVITY::Date & "\" ¶
view calendar at theDate ¶
end tell"

It's not clear exactly what you're aiming for here, so it's not easy to tell you how to fix it.
At first glance I'd say you're missing a quote symbol or two, but even then it doesn't make a lot of sense without more context - for example, 'ACTIVITY::Date' isn't valid as an AppleScript variable name (you can't have a : in a variable name), and your code isn't within a Filemaker block, so it doesn't appear to relate to Filemaker, either.
In either case the only thing that looks remotely valid to me would be:
set theDate to date "\"" & ACTIVITY::date & "\""
but without knowing the context of ACTIVITY::Date it's impossible to tell if this is valid, or how it differs from:
set theDate to date ACTIVITY::Date
(i.e., why the quotes are needed at all)

Error message "Firefox is already running but is not responding" - I have read and action the KB - no fix

So before we start - I have read the KB (https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding) and actioned the advice on how end the processes, delete the parental lock, etc. This gives a temporary but one time only fix and does not resolve the overall issue.
I have also uninstalled and reinstalled the application.
So why do I get the Error message "Firefox is already running but is not responding"?

See also:
*http://kb.mozillazine.org/Profile_in_use
Note that in Firefox 13+ (expected to be released June 5) the parent.lock file is no longer deleted after closing Firefox to make it possible to check for startup crashes, so the presence of that file will in the future no longer indicate a problem.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

TS1368 I downloaded the latest ITunes update, 10.6 I think. I can still sync my Ipod, but I can no longer access the Itunes Store. No error message, it just keeps "accessing" but nothing shows up. I've restarted my computer twice.

I downloaded the latest Itunes update, 10.6 I think. I can still sync my Ipod, but now I can't access the Itunes Store. There's no error message, it just keeps "accessing" but never completes. How can I fix this?

Ok... I just tried connecting my iPod directly to a USB port on the computer rather than via the USB hub I was using and everything is fine. Odd, but I'm happy now.
Thanks,
Evan

Idoc Error Message 51 is shown in sw37 but not in idoc Testing

Similar Messages

Maybe you are looking for