Idoc error message report

To see most of the EDI IDOC errors, we need to go into additional log to check that, is there any report were we can get list of idoc errors in one go for the users
Can any one tell me the tables which get updated when error shows up
pls help
vin

The tables are EDIDC (IDoc control segment) and EDIDS (Status messages). From EDIDC you can select IDoc numbers that have errors (check STATUS field) and then link EDIDS by DOCNUM and STATUS (note that there might be multiple entries, you may use additional criteria to skip what you don't need).
If you need the segment data then the table is EDID4 (or could be another number depending on the release).
Hope this helps.

Similar Messages

  • Re : Error Message reported on Exporting a ProjectPlan

    Hi,
    The following problem is endlessly appearing when I am attempting to backup a project plan from a workspace earmarked for backup. I have tried the following.
    Creating a new workspace and including all the plans and theron taking an export. This also fails.
    I am enclosing the error message reported. Can some one guide me to resolve this problem.
    SYSTEM ERROR: Workspace 'BACKUP' could not map ElementId: (-2,0,0)(64,0,68343)
    Class: qqsp_ImplementationException
    Error #: [1101, 736]
    Detected at: qqrp_Session::MapElmIdToInstanceId
    Last TOOL statement: method wsmgr.exportProject
    Error Time: Mon Nov 10 17:08:49
    Exception occurred (locally) on partition "Forte_cl0_Client", (partitionId
    = 9BF77B64-0A62-11D1-BD48-8BB2B251AA77:0x114a:0x1, taskId =
    [9BF77B64-0A62-11D1-BD48-8BB2B251AA77:0x114a:0x1.9]) in application
    "Forte_cl0", pid 40 on node BALA in environment centrale.
    Thanks in advance
    Bala

    Hi mate
    Yes, I know this error
    It appears because of usage not fully compatible disks
    I had the similar issue and could solve this using another DVD from another manufacturer.
    Check this it will help your too..

  • Inbound idoc error message

    Hello support team,
    I am developing a report in which i have to give a select option "date" when i entered the date in this select-option then after executing , the corresponding idoc type, idoc date, idoc number , idoc receiving site and idoc message that appers in Wper is shown.
    all the field are from EDIDC, EDID4, EDIDS tables except idoc message.
    Please suggest me from which table i found the message field .
    EX:
    site: 017
    idoc number : 6346213
    idoc type WPUWBW
    idoc date: 07.04.2010
    Idoc message:  "Delivery completed" indicator cannot be set for item 00018 .
    Thanks and Regards,
    Preeti thakur

    Hi digvijya,
    Its an Retail idoc and started with 'W'. These fields has not sufficient use for me. i tried it already.
    see this example. i need to fetch this type of error message "  Base unit of measure PC or article 000000000002014037 unknown  ". please suggest now.
    0000000027                                                                               
    idoc type:  WPUWBW Goods movements                                                                               
    idoc number: 1760035             idoc date:  07.04.2010                                                                               
    idoc message: Base unit of measure PC or article 000000000002014037
    Regards,
    Preeti

  • TS30000020 - IDOC error message

    Hi All,
    In our production system, we had some workflows got stuck up with SWF_RUN 609 error message. So i tried using SWPC
    transcation to resume those workflows. I worked fine. But some did not show up in SWPC and so i used SAP_WAPI_ADM_WORKFLOW_RESUME Fm to resume, it also didnt work. So i searched through sdn and some other sites and found out the standard report   "RSWWERRE - Report for restarting workitems with temporary errors", and tried that. My workflows got resumed. But over 2500 new workflow with TS30000020 and description "EDI: Incorrect status  for inbound IDoc" got triggered without any agents and it went all users. Iam not aware of IDOC.  Can anyone suggest why this has happened and how should i overcome this?
    Regards,
    Kevin.
    Edited by: kevin.jk on Jul 27, 2011 7:54 AM

    Hello,
    RSWWERRE is normally scheduled to run periodically (usually every 20 mins) to handle temporary errors.
    I'm not sure about how these IDOC workflows got started. If they're not necessary then you can logically delete them.
    If you look in the IDOC workflows, when does it sya they started? Recently?
    regards
    Rick Bakker
    hanabi technology

  • WORD Error message -- Report from Template

    Hello everyone,
    I try to generate a "Report from Template" with transaction CG03.
    I can select the generation variant and the parameter values in the next two pop-ups.
    WORD is starting but then there is the error message:
    "Word cannot read this document. Maybe it is corrupted. Try the following:
    - open and repair the file
    - open file with repair-textconverter".
    This message is a translation from german to english so the correct messagt might differ from this.
    When I look at my frontend PC in the local settings I see that the respective files are written, but I can´t open them.
    This problem started two days ago out of nowwhere.
    Additional information: Visual Basic pops up after the error message is closed with "runtime error '1055'.
    A debugger is opened and this is the content of the window:
    Private Sub TmpDDE()
    Dim Template
    WordBasic.FileOpen "C:DOKUME1chgiLOKALE1TempRehsfil0.WWI"
    WordBasic.FileTemplates Template:="C:ProgrammeSAPFrontEndsapguiwwiwwi.dot"
    WordBasic.Call "wwiES.S", "S", ""
    End Sub
    Any ideas?
    Thank you in advance for your help!!!!
    Best regards,
    Christoph
    Edited by: Christoph Giehl on Nov 25, 2010 1:04 PM

    Hello Christoph
    any change happened on your client? New Windows version? New Word Version? New WWI Version installed? Did you manupulated Standad Dot path etc.? Did you change Standard.dot of Word?
    Can you open in cg54/cg50 any document (ready, released or historic) without a problem and the problem is related only to "report from template"?
    During WWI process a number of files are passed on to your client. Can you use Wordpad to open the files? I am not sure but I believe per WWI document there should be something like 4 or 5 documents in your local WWI path. One containing the data, one containing the template and some others (named something like resfil, lesfil etc.).
    An error like you described is normally related to one of the above mentioned changes. Can you use "Report from template "regarding the same spec, same genvariant same language with a different client without a problem => then it is clear you have a local problem
    With best regards
    C.B.

  • IDOC error message

    hi gurus
    in my client place, when ever system sees 3 error messages(canceled PO, canceled line item in PO, free goods) it will automatically reject them, now my requirement is to add new error meesages to this automatic rejection program.
    so please suggest me what would be the possible solution for this kind of issue.
    thanks in advance
    bob

    Hi,
    If u r using the Z Message type & Z funtion Function Module ,  these are the following steps to be checked...
    Process Code : WE42.
    Function Module : SE37
    Message : WE81
    Assign message : WE82
    Assgin FM : we57
    Characterstics OF FM : BD51
    please check if ure function module interface is as per the template below:
    IMPORTING
    INPUT_METHOD LIKE BDWFAP_PAR-INPUTMETHD
    MASS_PROCESSING LIKE BDWFAP_PAR-MASS_PROC
    EXPORTING
    WORKFLOW_RESULT LIKE BDWFAP_PAR-RESULT
    APPLICATION_VARIABLE LIKE BDWFAP_PAR-APPL_VAR
    IN_UPDATE_TASK LIKE BDWFAP_PAR-UPDATETASK
    CALL_TRANSACTION_DONE LIKE BDWFAP_PAR-CALLTRANS
    TABLES
    IDOC_CONTRL STRUCTURE EDIDC
    IDOC_DATA STRUCTURE EDIDD
    IDOC_STATUS STRUCTURE BDIDOCSTAT
    RETURN_VARIABLES STRUCTURE BDWFRETVAR
    SERIALIZATION_INFO STRUCTURE BDI_SER
    This is the general required format for IDoc inblund processing using FM.
    Reward Points if it is Useful.
    Thanks,
    Manjunath MS

  • Alert with IDOC error message

    Hi All
    We are configuring IDOC monitoring process in BPIM of Solution Manager. One of our requirement is Alert mail should include IDOC number and error message.
    Example
    IDOC Number: 8358000
    Status: 51
    Message:  Payment term not found
    Could you please tell how to configure error message in alert?
    Regards
    Raju

    Dear Raju,
    Idoc monitoring functions and capabilities are explained in following documentations:
    www.service.sap.com/bpm -> Media Library -> Technical Information-> Setup Guide - Interface Monitoring
    "Business Process Monitoring functionalities in SAP Solution Manager u2013 ALE / IDoc Monitoring"
    /people/johannes.fleig/blog/2008/05/25/new-business-process-monitoring-functionalities-in-sap-solution-manager-150-ale-idoc-monitoring
    As you can read in the above documentations, the alerts display the total and delta number of IDOCs found.
    In order to get the detailed error message for an alerted IDOC, you must click on the "Detail Info" button, to access the monitored system and read the buffered information for the alert.
    Thefore, it is not possible to get this information in the alert email as this text is not displayed per default.
    An idea to overcome this would be, that you setup IDOC monitoring for the different message types (i.e. MATMAS), and then
    specified further on key figure level using the parameters "Status Message ID" and "Status Message Number", and entering the Message  Text as Alert Name (column "short text" ). This way you would get the message text in the email.
    Please see the example in the above SDN Blog, screenshots 2 and 3.
    Maybe you could also check if, changing the email configuration via the BADI, you cold add the required informaitons to the mails. To get details on this please see another useful SDN blog:
    "Create your own auto-reaction messages in Business Process Monitoring via BAdI exit"
    /people/johannes.fleig/blog/2010/06/02/create-your-own-auto-reaction-messages-in-business-process-monitoring-via-badi-exit
    A complete description on how to set up auto-reaction messages in BPMon, and to implement and work with BAdIs in the BPMon environment, can be found in the u201CSetup Guide u2013 Auto-Reaction Messagesu201D which is available on SAP Service Marketplace, alias BPM (http://www.service.sap.com/bpm -> Media Library -> Technical Information).
    I hope this helps,
    kind reagrds,
    Marta
    SolMan Team

  • Idoc error message "This change has been superseded by another"

    Hi,
    I am trying to process multiple idocs together which will create/update info records using the program RBDAPP01.  But it is processing correctly only single record and for all other records its giving the error message "This change has been superseded by another"
    The function module used for processing is IDOC_INPUT_INFREC and when I checked this error is coming from it.  Infact it is comparing the output of FM IDOC_SERIALIZATION_CHECK  and populating the error message.
    If we process the same record in single, it is processing correctly and not giving such kind of message.
    I am not sure what is happening here.  Please help.

    I was trying to create multiple PIR for same material using multiple idocs.  And that is the reason it is giving the error when trying to process the idocs together. When I tried changing the same into one record ie different PIR for same article in one idoc, its processing correctly.

  • IDOC : error message 20 : Error triggering EDI subsystem

    Hi,
          I am creating an extended idoc for WP_PLU message type . I am sending the data from my LS to KU(Customer).
    In WE20, I have configured the message type for that KU. I am using an XML port .
    The problem is that the Idoc file is getting created properly but it is thowing this message : Error 20 : Error triggering EDI Subsystem.
    In WE21 , I have ticked the Start subsytem radiobutton. I am not using any Middleware.It is simple data transfer .
    Same thing is working file when I am assigning a File port instead of XML port.
    Please help me on this urgently.

    Dear All,
    Many thanks for all suggestions. Very appreciated it guys.
    My problem solved, the issue was actually from the Functional configuration.
    After debugging i found out that there's a option to generate a trigger file (related to POS Outbound). If you tick this option then maybe you have to maintain the download path somewhere.
    My case is the option was ticked but system can't find the path.
    SAP put as error message 20 in the IDOC status.
    This maybe can explain also why i still can see my IDOC reached XI and file generated. Since the issue is not really related to any setting in IDOC but more to business configuration.
    Best Regards,
    Victor.

  • EDI IDOC error message

    Dear Team,
    may I kindly ask you to help me with regard to an error message I am getting for inbound idoc message type INVOIC.
    The message is "Field format is incorrect" and 'Field content is incorrect". Segment E1EDS01.
    I have tried various ways of fixing this but havent succeeded yet.
    Has anybody encountered this problem and how has one fixed it.
    Thanks

    Hi Dany,
    First identify which field value in that segment is throwing the error.
    For this, first see which all fields are filled in the error IDOC now.
    Then clear all values, and fill same value in one field at at time, and see if IDOC goes into error.
    Once you identify which field is having wrong format, you can check in detail.
    Regards,
    Nisha Vengal.

  • Where can get IDOC Error Message from Data base tables

    Hi ,
    i am automating idoc  checking process,in which i am getting control record from EDIDC tables,now i need to fetch Error message
    using this idoc no.
    How can fetch   error message text ?
    Thanks in advance.
    Regards
    sarath

    Hi its a structure, it doesnt store data.
    Take it from the table specified,
    Pass STAMID,STAMNO,STAPA1,STAPA2,STAPA3,STAPA4 to function module MESSAGE_PREPARE and you will get the message text.
    Also check the function module IDOC_READ_COMPLETELY

  • Viewing Idoc Error Message

    Hi,
    We have Idocs where the correct error message is obtained after going to WE02, clicking on the icon next to 51 status and then on the next screen clicking on the application log button.
    We have hundreds of Idocs in failed status and want to view the error messages, displayed after clicking on the application log button. Is there an easier way to do this, where I can see the error messages of all the Idocs at one shot rather then going inside each and everyone of the Idocs?
    Any help would be appreciated.
    Regards,
    Mick

    Thanks Chandra.
    But this FM will give me the error message that is displayed after you click on the icon next to 51 status.
    The requirement is that after you click on the icon next to 51 status, on the next screen click on the application log button. We want to see the error message displayed here.
    Also as mentioned earlier we have hundreds of Idocs in failed status and would like to see the error messages at one shot and not one idoc at a time.
    Regards,
    Mick

  • Re: IDOC error message

    Please help me with this error message when processing IDOC.
    Message no.AM034 : An address has already been created for this handle.
    I have checked the sales order and delivery, and there is no duplication.
    Can anyone tell what is this error message means?
    TQ

    Hello Sreelakshmin,
    Please refere to the following SAP note : 651008
    Hope this will help,
    Best regards,
    GL
    http://newitbizz.blogspot.com/

  • Outbound idoc error message

    Dear all,
    When i am manually create a direct request for POS outbound, the system shows the error message as below. It cannot generate an outbound idoc. Do anyone know how to detect this error and how to solve this problem?
    Error message:
    Processing Status
    Recipient: XX01
      IDocs created
         None
         Trigger file for status ID: 00000000260056
         does not have to be created       No messages needed
    Thanks and regards
    Chris

    Dear all,
    i have solved the problem. thanks you for your attention.
    Chris

  • BDB 5.2 Error message reported on std out

    While testing with 5.2 (we are planning ro upgrade to 5.2) we see the following message reported on
    the Screen -
    EnvLOC /tmp/testDB/MYDB
    /tmp/testDB/MYDB: DB_LOCK->lock_put: Lock is no longer valid
    My application continues to run - i.e. does not get any errors.
    My question - is this something I should be worried about. The message "Lock is no longer valid" seems to indicate there may be some consistency related issue.

    Hi rittick,
    I need more info on this issue:
    1. What is the exact BDB version you are using (e.g. 5.2.19, 5.2.36)? On what platforms/OS?
    2. Is this issue reproducible at will? Can you provide a small stand-alone test case program?
    3. What is the access method of the database on which you are performing the operation (e.g. Btree, Recno)? What isolation degree flag are you using (e.g. DB_READ_COMMITTED, DB_READ_UNCOMMITTED)?
    4. Are you acquiring and releasing locks explicitly by using the lock_get(), lock_put() or lock_vec() methods?
    5. If you can reproduce it, put a breakpoint on the following line in db-5.2.PP/src/lock/lock.c:
              __db_errx(env, __db_lock_invalid, "DB_LOCK->lock_put");or simply put a breakpoint on the __db_errx function. Get the stack trace when the breakpoint is hit and dump the content of lock and lockp (i.e. in gdb do a print lock, print lockp).
    Regards,
    Andrei

Maybe you are looking for