IDOC for distributing Batch/Lot data

Dear Experts,
Which IDOC should be used to distribute the batch/lot (tables MCHA, MCHB, MCH1 / transaction MSC1N, MSC2N) create and changes?
Thank you very much.

Hi,
BATMAS - Replicate Batch is not working for deletion indicator                         
"Batch Deletion flag at a Plant  "...
Could you please tell me which segment I should check for deletion indicator for batches in BATMAS...
Your help is greatly appreciated...
Regards,
Geetha

Similar Messages

  • Idoc for Incoming Payment lot creation

    Hi Experts,
    Currently i am working on an inbound interface which  has the requirement of Incoming payment interface from a Payment Processing center  which processes payment (cheques, payment stubs for over the counter payments, etc) and sends daily to SAP.
    For the above the Details given as:
    1. Transaction is FP05.
    2. IDOC Should be used.
    Can any one of you please suggest me the suitable IDOC for the Incoming Payment Lot Creation.
    NOTE: If there is no idoc, BAPI is also Recomendable for this requirement(last option).
    This is very urgent.
    Thanks And Regards,
    Loganathan.E.

    Hello,
    If you are receiving Payment file,
    Use program RFKKZE00 to post payment lot in mass.
    But you need to hold the data in the SAP provided structure
    RFKKZEDA/RFKKZEDG and process them
    else if you are receiving Returns file,
    Use program RFKKRL00 to post Return lot in mas
    But you need to hold the data in SAP provided structure
    RFKKRLDA/RFKKRLDG
    else you can use BAPI ‘BAPI_CTRACDOCUMENT_CREATE’
    Rgds
    Rajendra

  • Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"

    Hello ,
    The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's  at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
    We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
    Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
    Thanks in advance.
    Best Regards
    Sateesh

    Dear Sateesh
    Check this link where the same topic was discussed
    [ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
    thanks
    G. Lakshmipathi

  • Report for Inventory batch creation date

    Hi experts,
    Is there a report in SAP that shows inventory batch creation date?  We want the actual creation date NOT when the batch was input into SAP. For example, we went live on 4/1/2010 with SAP but there are inventory batch created prior to that date.  We want the creation date NOT the 4/1/2010 of data conversion date.
    Regards
    Rajneesh Gulati

    Hi Rajneesh,
    Check these tables which are relevant for batch management.
    MCHA
    MCH1
    MCHB
    Regards
    Ram

  • FICA -IDOC for posting the billing data from NON-SAP ISU system

    Hi,
    Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting)  in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI system

    Hi,
    you can create the same...
    but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
    or else follow some conventions if you are just starting the things..
    HTH
    Rajesh

  • Compare 2 IDOCS for duplicate

    Hi,
    Please any one can help me to compare 2 IDOCS for duplication (all the data records only).
    Thanks in advance.

    Hi Sandeep,
      Welcome To SDN!!.
    Refer the theard
    https://forums.sdn.sap.com/click.jspa?searchID=13274282&messageID=2854327
    Regards
    Kiran Sure

  • No batch input data for screen SAPMSSY3 0131 in Sales order IDOC

    I am processing Sales order IDOCS in status 64 using RBDAPP01 .Some of them error out to status 51 with the message -
    No batch input data for screen SAPMSSY3 0131 .
    I know the standard IDOC inbound process tries to simulate the posting in a BDC like process.
    Now, I went to we19 and the screen hangs up in a pop up in the partners tab with partner type 'WE' and my shipto (which is actually filled in the IDOC), missing..upon repeatedly hitting enter, it goes thru and an idoc is posted in status 53. But still unable to get through the root of this issue.
    Any, insight will help.

    Hi,
    I think the pop-up is generated through and user-exit for which recording is missing. This is why your idoc stays in status 64...
    Handle the screen recording in the user exit IDOC_INPUT_ORDERS
    user exit routine
    PERFORM customer_function_dynpro.
    FORM CUSTOMER_FUNCTION_DYNPRO.
      CALL CUSTOMER-FUNCTION '002'
        EXPORTING DXVBAK   = XVBAK
                  DVTCOMAG = VTCOMAG
                  DLAST_DYNPRO = LAST_DYNPRO
                  DXMESCOD = IDOC_CONTRL-MESCOD
        TABLES    DXBDCDATA = BDCDATA
                  DXVBAP    = XVBAP
                  DXVBEP    = XVBEP
                  DYVBEP    = YVBEP
                  DXVBADR   = XVBADR
                  DYVBADR   = YVBADR
                  DXVBPA    = XVBPA
                  DXVBUV    = XVBUV
                  DIDOC_DATA = IDOC_DATA
                  DXKOMV    = XKOMV
                  DXVEKP    = XVEKP
                  DYVEKP    = YVEKP
        EXCEPTIONS
                  USER_ERROR = 01.
    Regards,
    Krishnakumar

  • IDOC for Batch Master Conversion

    Hi,
    Is there any IDOC for Batch Master Conversion (Transaction : MSC2N) ?
    The data being maintained is in Basic data 1 and classification tabs.
    Regards,
    Esha Raj

    Hello,
    I faced the problem with BATMAS03.  When drilling down to F'tn BAPI_BATCH_SAVE_REPLICA I could that one and similar BATMAS03 get to work with filling following set of fields.  Adapt of course the values to you're system.
    BAPIBATCH_SAVE_REPLICA_
    MATERIAL = 000000000000033001
    BATCH = 12543872
    PLANT = D010
    CLASSALLOCATIONS
    CLASS_TYPE 023
    OBJECTKEY 00000000000003300112543872 (in our case MATNR&BATCH combination, dependend on system setting Plant could also be needed)
    CLASSNUM FROZEN_FINISHED (Classification Class)
    OBJECTTABLE MCH1
    CLASSVALUATIONSCHAR
    CLASS_TYPE 023
    OBJECTKEY 00000000000003300112543872
    OBJECTTABLE MCH1
    CHARACT LOBM_ZUSTD
    VALUE_CHAR X
    This works now fine and similar for the BATMAS IDOC
    Hope this is helpfull for you.
    Dirk

  • No batch input data for screen SAPMSSY0 0120

    HI All,
    I am trying to process an Inbound IDOC via IDOC_INPUT_ORDERS. But when I do this I am getting the following message:
    No batch input data for screen SAPMSSY0 0120
    And the IDOC goes into error.
    When processing the IDOC again via WE19 in foreground, I see a screen which pops up where it states:
    <matnr> has Phase out Status, valid from 01.01.2011
    the only way to get this screen out of the way is to cancell. But this is not working when I do WE19 in background. Does anybody have an answer on this one?
    Best regards,
    Guido Koopmann

    Hi Raymond,
    I checked out your note and see that it's valid for release: SAP_APPL 470 and my version for SAP_APPL is 500 level 19.
    The SAP_BASIS version in 640 level 21.
    So would be meanig that this note is not valid for me right?
    Best regards,
    Guido Koopmann

  • IDOC BOMMAT: Wrong validity-from dates for components

    Hi all,
    I am currently loading BOMs via IDOC BOMMAT for a data migration project. Unfortunately I am having problems to load the BOMs with the correct validity-from date for components. The data is correct when I check in LSMW, but after the load of the IDOCs the validity-from date of each component is the same as the validity date of the BOM header!
    System Version is SAP 4.7.
    Thanks for your help and Best Regards
    H.

    Has anybody any ideas?
    Thanks a lot!

  • BDC - Session Method - No batch input data for screen  SAPMZ_TPSCREEN02 100

    Hi ABAP Experts,
    I have written a Dialog Program For a Screen Which contains 5 fields namely,
    carrid,
    connid,
    fldate,
    price,
    planetype.
    I have written the PAI logic to insert whatever entries entered in the fields, into Database Table SFLIGHT.
    I created a Transaction and Tested whether the entries are succesfully entetered into the Database Table and it works just fine.
    Now i planned to write a BDC program for the above Transaction so that i can upload data to the Database table from a flat file.
    I went to SHDB transaction and created a new recording and transferred the program to generate a source code.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                  'AA'.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                  '0017'.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  '11/01/2007'.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                  '767'.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  'A310-200F'.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    Then i defined an internal table which contains the same fields as those in my Screen and Transaction.
    I populated the internal table from a flat file using GUI_UPLOAD function module.
    I want to clarify - I got this flat file by using the GUI_DOWNLOAD module and later i uploaded the same file using GUI_UPLOAD.
    I tested whether the internal table is populated or not using LOOP  AT ITAB. WRITE Statements.
    Its working just fine.
    Finally my code look like this.
    report ZVMREC
           no standard page heading line-size 255.
    TABLES: sflight.
    DATA: BEGIN OF itab OCCURS 0,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    price TYPE sflight-price,
    planetype TYPE sflight-planetype,
          END OF itab.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = 'C:\users\vamc\documents\flightinfo.txt'
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                      = itab.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                  'AA'.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                  '0017'.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  '11/01/2007'.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                  '767'.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  'A310-200F'.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    endloop.
    I checked for errors, activated and executed.
    I gave session name and executed, it generated same number of sessions as number of records.
    I went to SM35 and Processed one of the sessions in foreground.
    It brought my screen up with all fields fill up by the fields of first record in the internal table and with
    OK Code popping up.
    I check the OK Code.
    Now the problem has come up, its says
    *No batch input data for screen SAPMZ_TPSCREEN02 1000 *
    My session was now incorrectly processed,
    Please help me to fix this problem.
    I searched so many forums and google it a lot.
    But i didn't find any clue.
    Kindly take your time and have a look at this problem and let me know how can i fix it.
    Thank you very much all.
    Shiv
    Edited by: Sivaram  Naga on Apr 15, 2008 5:57 AM

    I used this code to convert the date format. I'm still getting the short dump.
       DATA: v_yyyy(4) TYPE c,
           v_mm(2) TYPE c,
           v_dd(2) TYPE c,
           v_date(8) TYPE c.
    v_yyyy = itab-fldate(4).
    v_mm = itab-fldate+4(2).
    v_dd = itab-fldate+6(2).
    concatenate v_yyyy v_mm v_dd  into v_date. 
    I'm once again, putting my code.
    report ZVMREC
           no standard page heading line-size 255.
    TABLES: sflight.
    DATA: BEGIN OF itab OCCURS 0,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    price TYPE sflight-price,
    planetype TYPE sflight-planetype,
          END OF itab.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = 'C:\users\vamc\documents\flightinfo.txt'
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                      = itab.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    DATA: v_yyyy(4) TYPE c,
           v_mm(2) TYPE c,
           v_dd(2) TYPE c,
           v_date(8) TYPE c.
    v_yyyy = itab-fldate(4).
    v_mm = itab-fldate+4(2).
    v_dd = itab-fldate+6(2).
    concatenate v_yyyy v_mm v_dd  into v_date.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                   ITAB-CARRID.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                   ITAB-CONNID.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  V_DATE.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                   ITAB-PRICE.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  ITAB-PLANETYPE.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    endloop.
    Kindly take a look at it and please help me out. I tried very hard. But i dont understand why?
    Thanks
    Shiv
    Edited by: Sivaram  Naga on Apr 15, 2008 5:46 PM

  • Idoc message for distributing site groups/site hierarchy in retail env

    Hi,
    I am trying to distribute site group data (hierarchy: brand, territory, region, district, site) using an idoc.  Does anyone know what idoc message/type I could use to do this?
    Thanks!
    Leticia

    Hi Bhoopal,
             Go to Tcode WE19 and enter the Failed Idoc number(can be seen in WE02)
    Go to Segment E1WPB04 and Double click on it you will see the Tax code and Tax Amount displayed.Change the Tax code as per what you have maintained in your Article master for eg : 0 - No Tax,1-Full Tax,2-Half tax etc.
    Then Click on Standard Inbound and that should generate a new idoc and then check the status of the newly created Idoc whether it gets posted succesfully(With status 53)
    NOTE : Make sure you used the correct currency since based on the country specific tax classification it might expect different tax rates(in case you maintained different tax rates based on the country)
    Hope it helps
    Best Regards,
    Aram K.

  • Inbound Idoc for - Inspetion lot results (QE03)

    Hi Guy's...
    I am looking for the Idoc which is used for update the actual results at characterstics level against the Inspection Lot ...in transaction QE03.
    I have tried with the Idoc QALITY02... but i am not able to achieve this its shows the status idoc is not fully posted . I am not sure whether i can use this idoc for my requirement.
    Let meknow if any other Inbound Idoc if i can use to post the results in SAP.
    I have already tried with the BAPI but i can;t used that because i need to do some calculation befor uploading the data...
    Its highly appriciated if some body can give the relavent answer...
    I assure i will award the points for the relevent answer..
    Thanks Enjoy weekend!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Manish

    Hi Ferry.
    I already tried with the Qalty02 idoc.
    But it shows the message the idoc is not fully posted  status is 52.
    Later i found in SAP help documents it has to be trigger by Workflow. I tried with that but no success.
    Can you give some input into that.
    My requirement is i need to record a result against the inspection lot number at the characterstics level..
    Thanks in advance..
    Manish

  • No batch input data for screen SAPMSSY0 0120 when running BDC in background

    Hi Experts,
    I am facing an  issue "No batch input data for screen SAPMSSY0 0120" when running a BDC for VA01 in background.
    The scenario is like we have EDI orders coming into SAP in the form Idocs. These EDI orders are processed by Function module
    IDOC_INPUT_ORDERS. This FM module internally calls VA01 (Call Transaction) to create Sales Orders in SAP.
    Now we have a scenario in which we want a popup screen to come up  & ask for selection of record from list of records displayed on popup screen. In background since we can not show up a screen, we are programatically selecting the record we want & going ahead.
    Now what is happening is during foerground the functionality is working abosultely fine, that is incoming idoc is getting posted successfully in SAP with status of 53. Incase of back ground processing of the same we are getting an error
    No batch input data for screen SAPMSSY0 0120
    I have checked this screen through screen painer(SE51) & i did not find any element on this screen but Element list
    shows one field Syst-Xcode.
    Kindly guide me how to fix the issue so that the same can work as expected in background.
    Regards,
    Chetan.

    Hi Chetan,
    List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
    Hope this helps, harald

  • Error ''No batch input data for screen SAPMF05A 0701'' with interface

    Hi,
    While I ran an interface from our legacy (vendor invoice), this message appeared in AL11 ''No batch input data for screen SAPMF05A 0701''  I saw in the pass ''No batch input data for screen SAPMF05A 0700''  but never 0701.  I'm not able to find a lot of documentation that help me.  Does anyone know what can cause this?

    HI,
    You can check by yourself the reason of the error in the following way,
    related to note 26050.
    Please check all the 3 points and furthermore please follow the
    third that says:
    1.  Call up Transaction FBV0 and branch to the list.
    2.  Select the parked document in which the termination occurs, and
         create a batch input session via 'Edit -> Create batch input'. Then
         process the batch input session in the foreground.
    Processing the batch input in foreground, You will be able to find out
    the reason of the error message You have.
    So, please call transaction FBV0   > Push the button "Document list"   >
    Execute then choose the document You want to post and push the button
    "Create batch input"    > When the batch input session is created, go
    to transaction SM35 and run it in foreground in order to find out
    the problem.
    Kind Regards,
    Fernando Evangelista

Maybe you are looking for