IDOC - Function Exit not getting triggered

I am doing an inbound IDOC for the message type WMMBXY and using basic type WMMBID02.
This is for goods movement based on PO.
I am doing an enhancement in the includeof the function module exit EXIT_SAPLLMDE_002.
This exit is supposed to get triggered for the message type WMMBXY.
when i tested the idoc in we19 it is sucessfully getting posted. I want to check my code in EXIT_SAPLLMDE_002. I have set breakpoint and tested using we19. But this is not getting triggered. But the idoc is getting sucessfully posted but with a status message 56 An inbound partner profile could not be found( I am not sure if this has something to do with above problem).

Did you attach your exit to a CMOD project and activated the same(CMOD transaction)?
The error you see regarding the partner profiles is probably due to the non existance of a partner profile for your idoc type in we20 transaction.
Maintain the inbound partner profile in we20 transacttion.

Similar Messages

User exit not getting triggered while creating the vendor

Hi all,
I wanted to extend the idoc(crermas01) according to my reqiurement.
But when I am trying to create a vendor using the IDOC cremas01 the user exit EXIT_SAPLKD01_001 is not getting triggered.
Can anybody tell me the reason why it is happening so...........
Thanks and regards,
Vinil.

Is your Idoc generated after the execution?
Where is you break-point, it is inside EXIT_SAPLKD01_001. Please note FM EXIT_SAPLKD01_001 will not be called unless it is implemented using project (CMOD) and project is active.

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

Enhancement spot - Function module not getting triggered in background

Hello Experts,
I have implemented an explicit enhancement spot. In the code implementation, I am calling a Function Module.
When I call that FM in background, things are not working as expected. But if I am calling that FM in normal mode, things are working fine.
I am passing parameter to FM by 'Value'.
Can anybody please let me know what I am doing wrong?
Regards,
Ashish

Hi,
Enhancement not getting triggered in BDC
Regarding on your query, You would go through below link.
Screen Enhancement of Transaction CO11N
I hope, it helps to you.
Regards,
Sekhar

User-exit not getting triggered in VA32

Hello Experts,
Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
Thanks.

Hello Experts,
Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
Thanks

User Exit not getting Triggered in Quality Server

Hi,
In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
which is getting triggered in Development server.But when I moved it to Quality,
The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
and that in turn is assigned to Project, still the problem persists.
Can any one suggest me what could be the problem.
Regards,
Kiran B.

Kiran,
Check the <b>Project</b> of that enhancement is active or not. not the enhancement.
<b><REMOVED BY MODERATOR></b>
Satish
Message was edited by:
Alvaro Tejada Galindo

Urgent IDOC - EXIT_SAPLLMDE_002 not getting triggered.

I am doing an inbound idoc on message type WMMXY goods movement.
The idoc is sucessfully getting posted when tested through we19.
But the user exit EXIT_SAPLLMDE_002 where i am doing an enhancement is not getting triggered when the idoc is posted.
I have activated the exit functional module, the project in CMOD is also activated.
Some one pls help me .. if u have its document pls post it to me.

Hi,
Please refer to this documentation of user-exit; may be of some help for you.
You can use this user exit to influence the processing of IDOCs of the
message type WMMBXY (goods movements) that are sent to SAP from external
systems via the MM-MOB or WM-LSR interfaces. You can also access
customer-specific processing in this case.
Call transaction and other important requirements
The user exit is performed in the function module that processes the
IDOCs of the message type WMMBXY, after the IDOC is withdrawn and
checked but before direct processing in the application has been
initiated. (That is, the data for the goods movement has already been
determined and edited, but the function module for updating this has not
yet been accessed. The standard function module for processing the
message type WMMBXY is called L_IDOC_INPUT_WMMBXY. The IDOC is processed
in an update task, which means that the source code is also executed in
the update.
If an error arises, then messages should not be issued since processing
is being carried out in the background and the result of processing must
always be returned to the ALE interface. For this reason language
elements such as MESSAGE, COMMIT WORK, LEAVE and the like should not be
used. If errors that should be passed on to the ALE interface or that
affect the result of processing are found in the user exit, you should
also use the user exit MWMIDI07(EXIT_SAPLLMDE_001) since it alone can be
used to take your errors into account (see documentation of the user
exit).
Parameters and options
The user exit in the program is the function module EXIT_SAPLLMDE_002.
In order to be able to use it, you must first create Include zxlidu10
and activate the enhancement by means of transaction CMOD. As
parameters, you can use the following data:
o   Goods movement data already determined from the received IDOC:
    -   Transaction code that is given along with the application
        function module (see interface description (import parameter
        X_TCODE).
    -   Indicator: post only if all items o.k. (import parameter X_XALLP
        ). This indicator must be set by default, to enable IDOC error
        processing.
    -   Indicator: Reset all tables (as primary call) (import parameter
        X_XALLR). This indicator is not set by default to enable the
        processing of several IDOCs. Normally you will not change these
        two indicators.
        -   Goods movement items table (table parameter T_IMSEG)
    o   Received IDOC data:
        -   IDOC control record (import parameter I_IDOC_CONTROL)
        -   IDOC data records (table parameter T_IDOC_DATA)
    This user exit can be used to:
    o   Influence the determined data for the goods movements. All data can
        be changed in this case.
    o   Analyze and process data that is transferred using customer-specific
        segments.
    o   Access additional activities.
    Examples
    A number of potential applications are described below.
A number of potential applications are described below.
o   You want to inform a user by mail when the goods movements of
     certain vendors or customers take place.
o   You want to start your own label printout, for example at goods
     receipt.
o   You want to update your own tables, for example statistical data.
o   You want to analyze a missing parts table at goods receipt and
     redirect the goods receipt correspondingly.
Reward points if helpful.
Regards,
Pankaj Sharma

IDOC - EXIT_SAPLLMDE_002 not getting triggered.

I am doing an inbound idoc on message type WMMXY goods movement.
The idoc is sucessfully getting posted when tested through we19.
But the user exit EXIT_SAPLLMDE_002 where i am doing an enhancement is not getting triggered when the idoc is posted.
I have activated the exit functional module, the project in CMOD is also activated.
Some one pls help me .. if u have its document pls post it to me.

I am doing an inbound idoc on message type WMMXY goods movement.
The idoc is sucessfully getting posted when tested through we19.
But the user exit EXIT_SAPLLMDE_002 where i am doing an enhancement is not getting triggered when the idoc is posted.
I have activated the exit functional module, the project in CMOD is also activated.
Some one pls help me .. if u have its document pls post it to me.

How to know whether a field exit is getting triggered or not??

HI ,
We are upgrading a system from 4.6 to ECC, the problem is that, in earlier system field exit was getting triggered but its not getting triggered in ECC, the field exit is active in ECC but still its not getting triggered.
Field Exit is FIELD_EXIT_SAKNR.
Please provide some help
Regards
Karan Arya

Hi,
As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
Prefix: FIELD_EXIT_
Infix: <Data element name>
Suffix: _0 to _9 (optional), _A to _Z
The interface is automatically generated during the creation of the function module, and has 2 parameters:
Import parameter: INPUT
Export parameter: OUTPUT
After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
As soon as you activate an exit, the corresponding screens are invalidated.
Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
Requirement
Set the profile parameter abap/fieldexit = 'YES' before system start.
Limitations
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT,
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Note:
Field exits cannot be edited with the debugger.
You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
Hope this helps you resolve your issue.
Regards,
Jayanth

Outbound IDOC not getting triggered while new master data is created

Hi Experts,
I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
Thanks in Advance,
Vinoth

Hello,
when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
regards,
Abhishek

For the new delivery type created the Idoc is not getting triggered

Hi All,
I am facing the following problem:
For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
The Idoc being used is: DESADV01
Message type :DESADV
Thanks,
Geeta

I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

Exit Class for Inbound Mail not getting triggered

Hi Gurus,
I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
I have made all the settings for SMTP.
Kindly guide me with the steps needed to be followed for triggering the Exit Class.

Hi
Check u have maintained ur outgoing mail server IP in SCOT transation.
Check link step to configure PO mail.
http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/

IDOC not getting triggered

Im triggering an idoc IDOC_OUTPUT_ORDERS immediately when i create/change the PO
However the idoc is getting generated when i change only certain fields.
When i change other fields it does not get triggered.
Why?
-Dexter

Hi Dexter,
I hope these links might be useful to you.. refer all the links, you will get it..
Idocs trigering
Idocs Triggering!
regarding Idoc triggering
Idoc triggering
Regards,
Ahamed.

IDOC IDOC_OUTPUT_ORDERS not getting triggered

Im triggering an idoc IDOC_OUTPUT_ORDERS immediately when i create/change the PO
However the idoc is getting generated when i change only certain fields.
When i change other fields it does not get triggered.
Why?
-Dexter

Hi,
Check in the distribution model tcode BD64 if you have set some filter settings for the partner.
KR Jaideep,

User command is not getting triggered in interactive ALV with LIST display

Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'TST1'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
                rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
*   When a record is selected
    WHEN '&IC1'.
*     Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.      IF sy-subrc = 0.
*       Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.
*       Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
Please advice what is the msitake i have done here..

Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
        gt_events           TYPE slis_t_event,
        g_variant LIKE disvariant,
        g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
        g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
        gt_list_top_of_page TYPE slis_t_listheader,
        g_repid LIKE sy-repid,
        gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
          i_callback_program      = g_repid
             i_callback_program      = sy-repid
             it_fieldcat             = gt_fieldcat[]
       it_events               = gt_events[]
          i_callback_user_command = g_user_command
             i_save                  = 'A'
             is_variant              = g_variant
           TABLES
             t_outtab                = it_print.
FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      CASE selfield-sel_tab_field.
        WHEN '1-KUNNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
            CALL TRANSACTION 'BP'.
          ENDIF.
        WHEN '1-MATNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
            CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
           GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
           SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
           SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
           CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
          ENDIF.
Endcase.
Endform.

IDOC - Function Exit not getting triggered

Similar Messages

Maybe you are looking for