IDOC Generation Using XSLT Mapping[Query]
Hi,
I am working on File to IDOC scenario. I have used XSLT mapping. It is necessary to generate EDI_DC40 segment for IDOC in XSLT?
-Kavita
Hi Kavita,
please take a look at note: 728792
(Fields of the IDoc control record )
it describes your scenario
Regards,
michal
Similar Messages
-
How to Count schedule lines in IDoc ORDERS05 using XSLT Mapping
Hi Experts,
In a Scenario where we are sending Purchase order (ORDERS05) to SAP SNC using XSLT Mapping,
where in we need to count the no. of schedule lines against the Purchase Order line.
As in Schedule line segment there is no such provision, so it needs to be handle in XSLT mapping to count the schedule lines.
Can you all please guide me how to go about the same.
Regards,
Nitin PHi Satish,
Thank you very much for the reply,
as there is only Quantity and other information is maintained against schedule lines how we can count the schedule line repeatation against PO line ? Is that very simple as you suggested or some other consideration also needs to be taken.
Please clarify the same and let me also know if there are some standard documents also for the same.
Regards,
Nitin P -
Issue in tranforming Idoc structure using XSLT mapping
Hi,
I am working on the XSLT Mapping to transform the IDoc xml to the desired format.
Source structure single Idoc:
EDI_DC40 record
E1EDKxx records
E1EDPxx records
E1EDSxx records
suppose I have 4 E1EDP01 records, of which 2 are Original and next two are corresponding Correction E1EDP01 records.
I want the target Idoc to be:
EDI_DC40 record
E1EDKxx records and for (E1EDK14/ORGID = G2O)
E1EDPxx records (1st Original E1EDP01 segment)
E1EDSxx records
E1EDKxx records for (E1EDK14/ORGID = G2)
E1EDPxx records (1st corresponding correction E1EDP01 segment)
E1EDSxx records
E1EDKxx records for (E1EDK14/ORGID = G2O)
E1EDPxx records (2nd Original E1EDP01 segment)
E1EDSxx records
E1EDKxx records for (E1EDK14/ORGID = G2)
E1EDPxx records (2nd Corresponding correction E1EDP01segment)
E1EDSxx records
so correction segments follows original segments.
All the E1EDSxx records are identical. remaining all the other segments are Idential except the above changes.
correlate original and correction E1EDP01 segments is through POSEX of Original = HIPOS of Correction..
bold segments represents Original records
Italic segments represents correction records
How to achieve the above scenario. I am finding issue in generating and correlating the E1EDP01 segments using <key> element. and changing the vales in E1EDK14
Also does XSLT supports Dynamic Configuration for File Name ?
Regards
Edited by: Varun Reddy on Jul 7, 2011 12:44 PMAlso does XSLT supports Dynamic Configuration for File Name ?= Yes.
refer - http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/55/7ef3003fc411d6b1f700508b5d5211/content.htm -
Advantages of using XSLT mapping
Can any one explain me the advantages of using XSLT mapping compare to graphical.java and abap mappings
Hi
Please go through the below links for details on XSLT Mappings..
XSLT Mapping
/people/udo.martens/blog/2006/04/26/xslt-recursive-templates
Thread:
Sample XSLT mapping required
XSLT Mapping Links::->
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
XSLT - ABAP.
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
exception handling errors in respect with XSLT mapping
http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/7672f7d7e444439fd7024f806221a4/content.htm
Hope this will help
Regards
Piyush
**reward points if found useful. -
Change Filename using XSLT mapping without variable subtitution
Hi,
My scenario is IDOC to file...i am using XSLT mapping, i want to change the filename format to OUT_<Purchase Number>_<DDMMYYYYhhmmss>_KKKK.txt, i cannot use UDF function as i do XSLT mapping i also i cannot use variable substitution as the target structure doesn't have PO and timestamp as tag elements. Can i acheive using writing a adapter module? I appreciate if anyone could help me with this..
Many thanks>
Ravibabu Adari wrote:
> Hi,
> If i go with Option1: what changes i need to do in the file adapter to tell the adapter to pick the filename from XSLT ?
> If i go with Option2: To which element to the target structure should i map the filename using UDF ? do i have to add additional element to the target structure? what changes i need to do in the file adapter to tell the adapter to pick the filename from Message mapping ?
>
> Many thanks
Hi,
in both cases you need to enable file adapter specific properties and enable the file name...
for this you need to use the dynamic configuration properties for the same...
usage of this option using udf in message mapping is rather easy than to use in XSLT...for this you dont need to change the structure in the message mapping...message mapping is just needed for execution of the udf.. thats it..
HTH
Rajesh -
Dear SDN,
I have a interface SOAP(HTTP) -> XI -> R/3.
In this interface, 3rd party sending 4 fields and are getting updated in R/3.
Now, I need to change in this interface.
There are 4 fields in sender side and one field is like primary field. while updating this fields, I have to check whather the primary field is exist in R/3 then only update remaining fields else do not update the record/IDOC in R/3.
And we are using XSLT mapping.
In this scenario, how can I procede further.
Please need your help and help me.
Thanks
Bala PrasadHi Bala,
u need go for XSLT look up methods were it chk for the primary key if it is found then it update or else nothing .
pls chk for this blogs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken]
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
pls chk for this
if found worth pls do the req
Thanx
Sampath -
ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING
Hi,
We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
Transformer configuration exception occurred when loading XSLT
sorce interface :outbound and asyncronous.
mapping : XSLT mapping (imported as a zip file)
target interface: abstract,asyncronous.
The xslt runs well in standalone and its well formed and there is no name space issue.
please help if any one has faced such a situation while using XSLT mapping.
regards,
Anirban.Hi Anirban
When you say it runs well <i>standalone</i> what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
Regards,
Thorsten -
Using XSLT mapping to avoid File content conversion
Hi all,
Can we avoid FCC by using XSLT mapping? I have a scenario in which I have to avoid FCC in the adapter and save the file in a excel/csv format. I have been through the different blogs and forums in SDN.
I have been through Michal Krawczyk's Blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2803. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Got a bit confused whether that blog serves my purpose. Expecting your valid inputs.
Thanks and regards,
Harikumar. SHi,
There are multiple ways in which you can avoid Content Conversion in the Sender / Receiver File adapters.
I think there was a heated discussion already regarding this in one of your earlier threads,
Read/Write csv files without file converter
Basically, if you want to avoid content conversion on the sender file adapter,
1. Write an Adapter Module. or,
2. Use a Java Mapping.
If you want to avoid content conversion on the receiver File adapter,
1,. Use a Adapter Modules or,
2. Use Java Or XSLTmapping ( XSLT can be used if the input to the mapping is XML and output needs to be say a Excel File etc).
Regards
Bhavesh -
How to skip first TWO Lines of .txt file using XSLT Mapping
Hi Friends ,
I have an .txt file in has the format as
<TEST>
4564564545
56456444566
56465
How can i skip the first two Lines when i am writing the XSLT Mapping ?
That <TEST> and empty line shouldn't go the rfc .
How can i skip and sent to rfc using XSLT Mapping ?
Best Regards .,
V.Rangarajanyou can avoid the empty lines in your File Content Conversion by defining offset.
<i>Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.</i>
ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
then the generated XML after FCC will not have the empty lines. -
Sorting on specific field using XSLT Mapping
Hi All,
I am trying to sort the records on specific field using XSLT mapping.But I'm unable get the proper output for the following code.
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="http://xxxxxxxx">
<xsl:output method="xml" indent="yes" />
<xsl:template match="/">
<a:T1>
<Row>
<xsl:for-each select="a:S1/Record">
<xsl:sort select="EmpID" />
<EMPID>
<xsl:value-of select="EmpID"/>
</EMPID>
<ENAME>
<xsl:value-of select="EmpName"/>
</ENAME>
</xsl:for-each>
</Row>
</a:T1>
</xsl:template>
</xsl:stylesheet>>
Currently getting following output :
http://www.flickr.com/photos/21390012@N04/2074799747/
Expected output should be like below :
http://www.flickr.com/photos/21390012@N04/2074807393/
Kindly send me suggestion to achieve this.
Regards
PullaraoHi ,
I donno much about srting in XSLT but i can give you one example on that.
Example :
This is how to sort numbers in xslt.
Try this :
<xsl:for-each select="learn[@kind='done']">
<xsl:sort select="number(@rank)" data-type="number"/>
<table border="00" cellpadding="3" width="100%">
<tr>
<td width="100" valign="top" align="right"><input type="checkbox" checked="checked" readonly="readonly"/></td>
<td width="10" valign="top" align="right"><xsl:value-of select="position()"/>. </td>
<td valign="top">
[<xsl:value-of select="@rank"/>] <xsl:value-of select="@title"/>
</td>
</tr>
</table>
<table border="00" cellpadding="3" width="100%">
<tr>
<td width="100"> </td>
<td valign="top">
<xsl:apply-templates/>
</td>
</tr>
</table>
</xsl:for-each>
Regards
Aashish Sinha
PS : reward points if helpful -
File TO File-Using XSLT mapping (for Beginners) --- Error in XSLT
Hi,
I am following this wiki (TO File-Using XSLT mapping (for Beginners))
https://wiki.sdn.sap.com/wiki/display/XI/FileTOFile-UsingXSLTmapping%28forBeginners%29
When creating Xslt from the MapForce, when I click on the XSLT Tab I am getting the following error
http://www.flickr.com/photo_zoom.gne?id=1216715484&size=o
How to correct this error ?.....
Thanks
srini
Message was edited by:
srinivasHello,
The XSD you are using is from Data Type and you are using it for mapping.
Instead export XSD for Message Type and also pass the XML schema for source that will solve the issue and your XSLT will be generated.
Regards, -
Remove SOAP Envelop using XSLT mapping.
Hi,
I need a code to remove SOAP Envelop using XSLT mapping.
Source:
<?xml version="1.0" encoding="UTF-8" ?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns="urn:enterprise.soap.sforce.com">
<soapenv:Body>
<getServerTimestampResponse>
<result>
<timestamp>2008-06-19T14:22:25.004Z</timestamp>
</result>
</getServerTimestampResponse>
</soapenv:Body>
</soapenv:Envelope>
target:
<?xml version="1.0" encoding="UTF-8" ?>
<a>
<b>
<c>2008-06-19T14:22:25.004Z<c>
</b>
</a>
Please help me in this
Thanks&Regards,
Yugahi,
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes" />
<xsl:template match="/">
<ns0:c>
<xsl:copy-of select="SOAP-ENV:Envelope/SOAP-ENV:Body"/ />
</ns0:c>
</xsl:template>
</xsl:stylesheet>
This will get your whole body...
Your root node should belong to some namesapce...i.e. getServerTimestampResponse .
Thanks,
Vijaya. -
Get the file name using XSLT mapping
Hi
How to get the file Name at receiver side using XSLT mapping.
Could any one please help me
Regards
sowmyaSowmya
If you will use Grpahical Mesage Mapping then this can be achieved using Adapter-Specific Attribute u201CFileNameu201D
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Code Snippet -->
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
u201Chttp://sap.com/xi/XI/System/Fileu201D,
u201CFileNameu201D);
But in case you have to ONLY use XSLT mapping then I would suggest to use the same jave code & call it from your XSLT mapping. I never tried such thing you might use couple of jar files too.
- lalit - -
Can we use XSLT mapping after graphical Mapping
Hi,
Can we use XSLT mapping after graphical mapping?
My requirement is to generate two namespace attributes in the target output.
So first I want to generate a structure using graphical mapping and then want to use XSLT mapping only to generate the second namespace XSI (leaving the rest of the structure as it is). Is it possible?
<ns1:Test xmlns:ns1="wmdata.dwbi.interface" xsi:schemaLocation="wmdata.dwbi.interface w_interface_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
Please post some solution. (I will reward points)
Br,
Madan AgrawalHi Madan,
Can we use XSLT mapping after graphical mapping?
To me it seems feasible...
But to using the two mappings one after another you will have to use BPM .
Use transformation step for this to use the mapping and change in structure.
Regards, -
To filter records using XSLT mapping
Hi all,
I am using XSLT mapping in my scenario.
I have below structure.
<Node>
<emp_id>123<emp_id>
<begin_date>dd/mm/yyyy<begin_date/>
<end_date>dd/mm/yyyy<end_date/>
<check_date>dd/mm/yyyy<check_date/>
<Node/>
I want to filter out the records based on check_date. If checkdate is less than enddate, i want to filter out that particular records.
If anyone knows, Please suggest me in this issue.hi,
<xsl:variable name="checkdate">
<xsl:for-each select="Node/check_date">
<xsl:value-of select="substring(concat(substring(Node/checkdate,1,2),substring
(Node/checkdate,4,2),substring(Node/checkdate,7,4)),1,8)"/>
</xsl:for-each>
</xsl:variable>
Like wise create a variable for end date....
<xsl:for-each select="Node">
<xsl:if test="$checkdate > ''$enddate">
<emp_id>
<xsl:value-of select="Node/emp_id"/>
</emp_id>
like wise create map for other filed...
</xsl:if>
</xsl:for-each>
I think this will solve your requirement......
Regards,
Prakasu
Maybe you are looking for
-
PI 7.11: Cannot connect to server using message server:...
Hello Guys, we make the Application Management for a Customer PI System. Scenario: - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine. SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP St
-
How to enter an account assignment category for a material.
Hi guys: I am facing following error prompt,please tell me how to enter an account assignment category for a material. thanks Account assignment mandatory for material 0000000N6451 (enter acc. ***. cat.) Message no. ME062 Diagnosis There is no pro
-
How do I copy a dvd onto my macbook pro?
how do I copy a DVD onto my macbook pro?
-
Recovering Video File when Quicktime 7.6.6 relaunches
Hi I was in the middle of a wonderful interview with a Human Rights Activist when Quicktime QUIT unexpectedly. I relaunched the program and continued the interview on another file. Only now I cannot find first file anywhere. Anyone know if it's possi
-
Import from 11.2.0 to 10.2.0.4.
Hi ALL, Is it possible to do an import from 11.2. to 10..2.0.4 using imp.? If so , would u plz advice the steps to follow....