Idoc hierarchy lost in SAP

Hi
We are trying to post an Idoc from PI to SAP system. In PI monitoring the Idoc XML is fine with all segments in correct hierarchy. When looking at the Idoc in we02 transaction in SAP system, the hierarchy structure is lost and it fails to process. Have anyone experience this before? Any suggestions?
Thanks!
regards Ole

Hi Ole,
>
Re-imported the idoc and transported it to test, but still no luck. Do you have any other suggestions?
Have you re-imported the metadata as well?
Regards,
Neetesh

Similar Messages

Send/Receive IDOCs (XML) from/to SAP R/3 with XI-SOAP without XI!

Dear SAP specialists,
(BACKGROUND) We are using the Microsoft BizTalk Adapter for SAP 1.0, developed on top of the SAP DCOM Connector (we are using the version 6.20 Patch Nr. 177), with Microsoft BizTalk Server 2002 SP1 in order to send and receive IDOC via the tRFC transport protocol. We are using the Microsoft BizTalk Adapter for SAP 1.0 since February 2002, and today we are exchanging more than 25,000 IDOC/day with this architecture.
When we migrate our SAP R/3 system to the version 4.7 with WAS 6.20, I was very enthusiastic about the possibility of sending the IDOC in XML via the standard HTTP transport protocol, because it would considerably simplify my architecture, i.e. no need of any (expensive) adapter any more! But, I had to realise that the quality of service exactly once will not be there anymore with HTTP as it exists with tRFC. Then, we carry on using the tRFC transport protocol with the adapter.
(QUESTION) But recently, I followed the SAP Course TBIT40 XI Foundations and I learn that:
1. On one hand, the XI-SOAP protocol supports the quality of service exactly once by the usage of a message GUID within the XI-SOAP envelope;
2. On the other hand, all mySAP solutions using WAS 6.20 (or higher) carry a small Integration Engine (with XI-SOAP as the native transport protocol).
Then, my question is: << Is it possible to exchange IDOC (XML) directly with an SAP R/3 4.7 (WAS 6.20) via the XI-SOAP transport protocol using the small Integration Engine embedded into it, with the quality of service exactly once? >>
Many thanks in advance and best regards,
Patrice Krakow

Hello Patrice
We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
Since your que is three years old, I'm sure you must have found some method for this.
We'll highly appreciate your help.
Regards: Gaurave

IDOC-- XI-- HTTP (non-sap) 403 Forbidden

Hi guys,
When I execute my scenario IDOC>XI>HTTP (non-sap) URL address Asynchr. The receiver receives the message correctly
but in my XI monitoring the message stands in error mode.
At first sight this is not a big problem because the receiver receives the message correctly
but it would be nice if the message would stand in processed succesfully.
The error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3>Service Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 403 reason Forbidden explanation Service Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please don't redirect me to an old topic because I have read all topics and none of them could help me. :s
TIA
Message was edited by: Peter Delve

Hi,
this is the describtion of W3ORG:
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
May contact web admin.
Regards
Matt

MATMAS01 IDOC not reaching to SAP XI via report program.

Dear Experts,
WE are facing small challenge.
I searched on SDN on scenarios: IDOC not reaching to SAP XI. But could not find exact solution t oour scenario.
Problem:
MATMAS01 IDOC is not reaching to SAP XI via report program and is in status of 03 on SAP system. And there are not entries under SM58.
Under SAP XI system IDOC entry is not reflecting under IDX5 transaction, I tried to delete meta data of MATMAS01 thru IDX1 and uploaded again but still IDOC is not reaching to SAP XI.
The strange is that MATMS01 IDOC is reaching to XI via WE19 test tool. So PORT and RFC destination settings betweeen R3 and XI is also correct.
What could be the wrong ?
Thanks
Divyesh

When sending Idoc from R/3,
Settings at R/3
create one port at WE21,
Create Partner Profile for Outbound Message type in WE20.
settings at XI
Create one port in IDX1
Import Matadata in IDX2.
Create complete scenario in ESR for Idoc sender, also import IDoc in Imported Objects.
Check these settings & send test idoc using WE19.

How to convert IDoc-XML to native Idoc-File with in SAP XI/PI

Hello,
I have a problem to Create an native IDoc-Format for an File-Receiver.
The scenario:
I get an Idoc (ZMATMAS) from a SAP System to an MATMAS-exchange-scenario. One of the non-SAP-receiver-systems needs an other native IDoc-Format as File. So I have to map the ZMATMAS to the receiver Format and write this as File. The problem is, that this file contains the data as IDoc-XML and not as native IDoc-format.
Has anybody an idea for this problem?

U need to use sender idoc adapter and file receiver adapter.
U can do file content conversion at receiver end.
Content Conversion is basically to convert a text file that contains complex structures into an XML source format and vice versa. It is present only in the File Adapter because it is one of the message protocol which will convert the structure to a desired format.
There are many blogs for File Content Conversion. Some of them are listed hereunder:-
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
You may also check the FCC documentation for Sender and Receiver:-
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm

Customer Hierarchy details in SAP ERP BP transaction

Dear All,
Currently we are using BP transaction in SAP ERP and also using customer hierarchy transaction VDH1N.
Now the problem is we cannot see customer hierarchy in BP transaction, we have any option that we can create relationship in the BP transaction, however its a double effort. Is there any option that we can see the Customer Hierarchy details in SAP ERP BP transaction?
Regards,
Murali

Hello Murali,
With BP transaction, do you mean business partners in XD03 / VD03?
>> we cannot see customer hierarchy in BP transaction
No, you can't see the customer hierarchy in XD03. That's correct.
In XD03 you have sold-to, payers, bill-to and ship-to.
You also have hierarchy nodes (012).
In my opinion, the customer hierarchy should only have relations between hierarchy nodes and sold-to(s).
Therefore these are different information segments => No need to see the hierarchy from the BP transaction.
Hint: Maybe that is the reason why the functionality is not available in the standard system!

IDoc structure mismatch between SAP R/3 and PI

Hi,
There is an interface in PI which receives IDoc from SAP R/3 system. I have been facing an issue of IDoc structure mismatch (in terms of data present in it) between SAP R/3 and when PI receives the IDoc.
To be more precise,
In SAP R/3 system, the value ABC is present in the field DOCNUM in the IDoc.
But when the PI receives the same IDoc from SAP R/3 (as seen in Integration Engine), the value ABC is present in a different field and the DOCNUM field is empty.
<DOCNUM></DOCNUM>
<ARCKEY>ABC</ARCKEY>
The first step towards resolution was to delete and reimport the IDoc metadata from SAP R/3 in PI system using IDX2, which did not help in this case.
Could anyone please help in resolving the field mismatch between the IDoc triggered from SAP R/3 and the IDoc received by PI.
Regards,
Prajeet

Hi Prajeet,
it's long ago but your question has not been finally solved, so let me try to give you an answer. We are facing the same problem after patching our PI.
I think the reason for the different behaviour is related to SAP note 1233908, where SAP has changed the IDoc adapter.
https://service.sap.com/sap/support/notes/1233908
Regards,
Lars

Hi friends, IDOC and RFC are sap related.but idoc is in abap stack rfc is

1)IDOC and RFC are sap related.but idoc is in abap stack rfc is in java stack.what is difference between two.?

hi ganga,
The IDoc adapter is used by SAP systems to connect to a centrally configured Integration Engine using IDocs
which is properitory to SAP integration
so it doesn't need the Adapter engine.
refer:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
The Adapter engine is working on the J2EE Engine.
RFC Adapter is provided by the AdapterEngine.
So RFC needs Java Runtime where IDoc doesn't.
refer:
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
regards,
nikhilbos

IDoc adapter with Non SAP systems

SAP XI 3.0 help says:
You can use the IDoc adapter to connect SAP systems (as of release 3.1) and non-SAP systems with the Integration Server using native IDoc structures
What does this mean?
-Naveen.

Hi Naveen,
Let me give a use-case in one of our projects ....we have 2 middlewares in our landscape...webmethods and XI...and in one particular instance there was a need to send an FI IDoc from webmethods to XI and forward it to R/3....
In this case, the webmethods was treated like any other sap system for receiving IDoc into XI(with settings in IDX1)...
Hope this might clarify a little bit...
Thanks,
Renjith

How we can import an IDOC structure from one SAP system to another w/o ALE

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
Any response will be awarded!
Thanks a lot.
Samson

hi,
1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
2.By executable program also like bd10 and bd11.
Regards,
SHIVA(reward if helpful).

How we can import an IDOC structure from one SAP system to another

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes.
Any response will be awarded!
Thanks a lot.
Samson

hi!
Define the logical system names in both the systems.
Logical system names :SAP001
SAP002
SAP001 FOR 001 CLIENT
SAP002 FOR 002 CLIENT
These two logical system definitions should be present in both the systems.
Assign the logical systems to the client. (in both the systems)
Assign SAP001 to 001 CLIENT
Assign SAP002 to 002 CLIENT
you can See these in transaction SALE.
After this define the rfc DESTINATION IN sm59. (in both the systems)
In 001 client create the RFC destination name SAP002
In the tab log on security, give the user name and password and client of the 002 client and save it.
Similarly do the reverse in the 002 Client.
In 001 client create the port.(Transaction WE21)
Specify the RFC destination name as SAP002.
Now you can define the ports, (both the systems)
Create the partner profile for partner(ie gve logical system name of partner) , so give as SAP002.
partner profile in both the systems.
Now create the distribution model in BD64 and goto edit>model view>distribute.
The same model view will be visible n distributed to the partner system also..which in this case is sap002.
U may trigger the idoc from we19 and chk its status in we05.
Please let me know if you need further info on this.

Issue in sending IDOC from BODS to SAP

I am getting issue while sending IDOC from BODS to SAP.
Job is getting failed with error : "No authorization to send Idoc with message type CREMAS"
I have checked last authorization in SU53 and it is Successful !!
What would be reason because of which job is getting failed with Authorization error?

Go to sm58-->Select IDOC_INBOUND_ASYNCHRONOUS this function module, in menu mar select edit--> execute LUW.
or take help from sap basis team, can you please check user in the source system have authorizations profile. 'S_BI-WX_RFC' for this u can refer sap note :150315.
if you need more information refer this document:
How to check a BW - SAP source system connection - SAP NetWeaver Business Warehouse - SCN Wiki

Posting idocs in sequence in SAP from file (without BPM)

Hi,
I have a requirement of posting the TWO idocs from the single file. But I need to send the idocs in sequence. Can you anyone explain the process how we can ecomplish from XI without using BPM.

Hi,
you can ONLY do that if your ERP,R3 (IDOC receiver system) system
is based on WAS 6.40
the whole scenario is described step by step in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How manage outbound IDoc with QRFC in SAP CRM 5.O

Hi experts,
I want to manage outbound IDoc with QRFC. For doing it I selected the flag Query Processing in transaction WE20. When I run the program QRFC Monitor (RSTRFCM1) the system shows this error message:
Status is SYSFAIL.
"[SAP.111.9129] WMSAP Adapter: Missing notification
- Message type: IDOC INBOUND"
Can someone help me?
Thanks a lot in advance,
Lorenzo

Hi,
if you want to find out how to do outbound IDOCs
with qRFC you can check my new book:
/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi
in one of the scenarios it describes exactly what
you're looking for (among other things)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

Idoc hierarchy lost in SAP

Similar Messages

Maybe you are looking for