IDOC Message Type FIDCCP02 - Error RW029

Hi All,
We are trying to post a FB01 using a IDOC message type - FIDCC2 and struck at error message -
<b>Accounting transaction not permitted for posting in FI/CO
Message no. RW029</b>
When i try to post directly using the exact data in the IDOC, through FB01, there is no problem.
Debug showed that the error is in the following -
Include <b>LRWCLF01</b>
check business process
SELECT SINGLE * FROM t022 INTO ld_t022
WHERE activity = t_acchd-glvor.
IF sy-subrc IS INITIAL.
IF LD_T022-VORGTYP = 0 OR  <---------
IF ld_t022-satztyp <> 0.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
ELSE.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
If this is not the right message type to use, can you suggest any other message type? FB01 we are trying to post is a simple GL posting, no tax, no withholding, etc. IDOC is just a 2 line posting.
Any help/advice is highly appreciated.
Many Thanks,
Shashi

Hi Shashi ,
                  This table is for Business Process t022 based on activity .
Check your customise settings .
There is no problem with message type .
Please reward if useful

Similar Messages

  • File to IDoc (Message Type - FLIGHTBOOKING_CREATEFROMDAT01) Error

    Hi all,
    Error i'm getting --  "Error: IDoc XML data record: In segment attribute occured instead of SEGMENT"
    Tried removing SEGMENT value to 1 for both segments and for individual segments with no luck ....
    Awaiting your invaluable replies on this thread.
    Thanking you in advance
    Sreedhar Kurella
    Message was edited by:
            Sreedhar Kurella

    Hi Sergio,
    Though i couldnot find exact menu as per your suggestion i followed
    rwb -> comp. monitoring --> Clicked Adapter engine server
    clicked button 'Adapter Monitoring'  which popped up another window where in which upon clicking 'File' , I found following error information :
    Retry interval started. Length : 600000.000s
    Error: File 'C:\Flight01.xml' - deleting after processing failed
    Processing started
    I rechecked the file name (including any accidental spaces) in C drive and again copied the file name from Comm Channel and renamed the file in C drive with same  and reactivated comm channel with no luck ....
    file has no 'read-only' attribute checked .....XI is running on windows 2003 and rechecked the persmission of the file where in which i made sure my user id (nwwadm) has got all permissions on this file...
    still now luck
    btw -- scenario is converting XML to IDoc to 106 client ....as i haven't filled any EDI_DC40 segment, idoc failed in 106 client .... will that failure be any cause of this anamoly behavior on file deletion ? i believe it shouldn't ?
    any pointers pls ?
    Thanks

  • ALE-IDoc : Outbound message control for MIRO,IDoc message type for INVOIC

    Dear Experts,
                        I am using the IDoc message type INVOIC. For that i have created the new output type. Then i assinged the the Program RSNASTED and form routine ALE_PROCESSING.
                        But when i am saving the transaction in MIRO i am getting the Update Error like VN 056: Processing log for program RSNASTED
                        Please help me to rectify this problem

    Hi Dharmendiran,
    We also have the same requirement to send status acconf messages on Inbound INVOIC idoc posting..
    Can you let me know how you went about creating new output type..did you mean new output type in NACE for application MR?
    Thanks.

  • IDOC message type for "Site" in SAP Retail module?

    Hi All,
    We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction:  WB01, WB02).  Does anyone know if there's an IDOC message/type already associated with this?  Thanks in advance for your help!
    Cheers,
    Matt

    Hi,
    please read SAP notes 892103 and 551035.
    The correct IDOC type should be FIDCC1 / FIDCC2.
    Best regards,
    Andreas

  • How to get the segment  detials of IDoc message type.

    Dear Friends,
    I  want to write function module , which takes the IDOC  message type  as an input and returns all the segment fields in response.
    Basically I want to get the XML schema of a IDOC message type and need to expose these details toa 3rd party application to use.
    Dear experts ,Please do give me some ideas how to achieve this .
    like tables from where i can get these details or u feel any other goos way of doing the same.
    thx,
    jeevan

    Hello experts,
    Please participate .........
    To redefine my objective I will say:--
    I am trying to do some thing very similar that is there in XI .
    You might have seen the way IDOCs are shown while mapping an idoc structure.
    Its like you select a message type and u get all the list of  Idoc Structure shown .
    I am really relying on you people.
    thx ,
    jeevan

  • Idoc/message type related to su01 tcode fields?

    hi experts,
    when i create a user in su01,an idoc should get triggered.
    are there any standard idoc / message type having fields related to this.
    thanks,
    charu
    Edited by: charudevrani on Jan 11, 2012 7:38 AM

    Hi Charu,
    You can use one of following IDoc types, depending on the action you want to perform on the user master record:
    USERCHANGE     Change user
    USERCLONE     Create User with Template in Another System
    USERCREATE     BAPI to Create a User
    Regards,
    Marcin

  • CRM: IDOC Message Type: CRMXIF_PARTNER_REL_SAVE_M

    Hi,
    I'm currently working on a CRM data migration project. I'm using the IDOC Message Type: <b>CRMXIF_PARTNER_REL_SAVE_M</b> to map data into contact relationship structures.
    The problem I am having is the above interface works with SAP standard <b>BUR001</b> type contact relationships. But a copy was taken of <b>BUR001(is contact person for) => ZUR001 (former contact person of)</b>. This allows you to add a date range: <b>DATE_TO - DATE_FROM</b>. Using the above interface I am able to map these dates to the <b>ZUR001</b> type relationships.
    All the other data I try and map  i.e Function, Telephone No, Fax No ect.. will not map. I'm at a loss as to why not?
    note: running CRM 4.0
    Any help with this would be greatly appreciated.
    Regards,
        Philip Johannesen

    Thanks Saquib, the OSS note was very informative.
    Do you know where I can find <b>" In addition, you can find DXWB/LSMW examples under service.sap.com/CRM-Integration which you can install in a CRM system and use as models."?</b>
    I've looked under the new link <b>"service.sap.com/crm-netweaver"</b>. But have been unable to find any examples.
    I've awarded points as promised.
    Regards,
       Philip Johannesen

  • Equivalent Idoc message type for EDIFACT BANSTA

    Hi Experts,
    I am trying to find out the equivalent IDOC message type for EDIFACT BANSTA. The purpose of the message is to show the item level statuses for a particular payment batch. There are lot of references about FINSTA01, however, this is for account level status response.
    If anybody know the equivalent idoc message type for EDIFACT BANSTA, kindly let me know.
    Thanks in advance.
    Regards,
    Ravi

    Thanks raja shekar. I posted this thread in ABAP development forum.

  • MB1B transfer posting Idoc/Message type for outbound and inbound

    Hello All
    Can anyone tell me the idoc/message type for movement type 313 outbound and 315 inbound to SAP. This is for MB1B Enter Transfer Positing.
    Thanks
    Ricky

    Its WMMBXY

  • Idoc Message type and Process Cosde for CJ01 transaction

    Hi,
    What is the Idoc message type and inbound Process code for CJ01 transdaction?
    Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
    Thanks.

    Hi,
    All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
    Go to se93 and search for BD* and look for the description.
    Regards,
    Nilesh.

  • IDOC Message type for EDI 947- 'Warehouse Inventory Adjustment Advice'

    Dear Guru's
    I am in a EDI-IDOC project for my Client. Where a customer is treating my client as 3rd party warehouse. we have a scenario where I wanted to Trigger OutBond EDI 947 (Warehouse Inventory Adjustment Advice) from MIGO/MB1A/MB1B and MB1C. Can any one tell me what is the Standard IDOC message type and Basic type i can use.
    You kind help on this will be great full to me.
    With Regards,
    M. Rajendran.

    Hi Sridhar,
    Thanks a lot for your reply. I need to try with the proposed message type. Hope it works fine.
    With Best Regards,
    M. Rajendran.

  • IDOC Message type for FB01 transaction.

    Hi,
    I am going to get a file which I will pass through PI (XI) and bring into IDOC and post into SAP ECC 6.0.
    I just wanted to know which IDOC message type / basic type I should use for posting an FI document i.e. FB01 transaction.
    Rgds

    Hi,
    please read SAP notes 892103 and 551035.
    The correct IDOC type should be FIDCC1 / FIDCC2.
    Best regards,
    Andreas

  • IDOC message type LOIPLO not triggering

    Hi Friends
    Our client want to send firmed planned orders to External system through outbound IDOC LOIPLO
    So we are using MF50 to firm the planned orders.
    The idoc message type LOIPLO is not triggering.
    How to trigger IDOC message type   LOIPLO . What are the settings we have to do.
    Regards,
    Srihari.M

    dear friend,
    Message Type :  LOIPLO
    Basic Type :        LOIPLO01
    You need not create any custom IDOC type as we are having a standard IDOC type available within SAP, but you need to write a custom function module to read the data from the IDOC segments and then call the below BAPI to post the Planned Order.
    Check the input parameters of BAPI and gothrough the documentation of the Basic Type in WE60 transactions, whether all the necessary input parameters of the BAPI are covered in the standard IDOC type, if not then we need to customize the standard basic type to meet the requirements.
    Bapi which needs to be used is BAPI_PLANNEDORDER_CREATE
    good luck!

  • IDoc Message Type for VL09

    Hi,
          Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
          We are using an ECC 6.0 system (WebAS 700)
    Regards,
    Aditya

    Hi,
    You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
    This process code will call FM IDOC_INPUT_MBGMCA to  reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
    Regards,
    Ferry Lianto

  • Process code's function module required for the IDOC Message type PROACT

    Hi,
    I am trying to trigger an IDOC from ME32K transaction which will carry my Contract agreement details to XI. The IDOC I am using for this purpose is PROACT.PROACT01. But I couldn't find the outbound process code / Function module for the process code associated to this IDOC message type.
    Pls help me out....
    Thanks,
    Ram Kalyan

    I checked table EDIFCT for the message type and found this:
    Function module            Function type    Basic type                                      Message Type
    IDOC_INPUT_PROACT          F               PROACT01                                       PROACT
    Oops...I think you are looking for outbound..Ignore

Maybe you are looking for

  • Help - Compilation failed while executing: as

    I just randomly started getting this error when trying to deploy to an iOS device.  I am unable to compile a debug or release build. I am using Windows 8 and FlashBuilder 4.7,  earlier I was compiling just fine and almost out of no where I started ge

  • 2 window view, isolate mode switches both to preview, instead of leaving 1 in outline

    I wanted one of my 2 windows open to stay in outline mode when I switch the other window to preview mode. can we do this please. I work closely in outline on one window, and use the other to preview, however when I want to isolate a shape in the prev

  • Cash Journal - Reimbursement

    Good day to all. I am setting for the first time cash journal, as did all the settings and did some tests, but I have a very big question. I have to create a movement for reimbursement of money to the company. That is: - I had expenses for $6,000.00

  • Red eye removal help please

    I have a photo of 5 people all with red eye. I went into quick edit for auto red eye removal and some peoples eyes became normal and others did not. Some would have one eye normal and the other red I went in to the expanded version of editing and tri

  • Yoga 2 Pro LINUX thread

    I am trying to install Linux but I have ran into a snag, according to the following blog post in order to get the screen to work I need to pass a kernel boot option when booting the live usb (acpi_backlight=vendor). I have tried Manjaro 0.8.8 and Ope